BASIC INSTRUMENTATION CH.5

Question 1

A SIGNAL THAT IS CONTINUOUS AND HAS AN INFINITE NUMBER OF POINTS BETWEEN ITS BEGINNING AND ENDING VALUES WOULD REFER TO AN ANALOG SIGNAL

Answer 1

TRUE

Question 2

VOLTAGE TRANSMITTERS ARE 4-WIRE TRANSMITTERS

Answer 2

TRUE

Question 3

ON A PROPORTIONAL CONTROLLER THE DESIRED SET POINT AND PROPORTIONAL BAND ARE USUALLY ADJUSTED WITH A POTENTIOMETER

Answer 3

TRUE

Question 4

ADDING TIME IS THE TIME IT TAKES THE CONTROLLER TO ADJUST ITSELF BACK TO ITS SET POINT

Answer 4

TRUE

Question 5

A PROPORTIONAL PLUS INTEGRAL CONTROLLER CAN BE USED FOR THE CONTROL OF FLOW GAS AND LIQUID PRESSURE OR TEMPERATURE AND LEVEL APPLICATIONS

Answer 5

TRUE

Question 6

PID CONTROL SYSTEMS CAN BE USED IN ALL SYSTEMS BUT PERFORM ESPECIALLY WELL IN SYSTEMS THAT HAVE LONG DELAYS

Answer 6

TRUE

Question 7

PLC’S ARE PROGRAMMABLE LOGIC CONTROLLERS THAT PERFORM MANY LOGIC FUNCTIONS

Answer 7

TRUE

Question 8

COMMUNICATIONS BETWEEN CONTROLLERS AND COMPUTERS ALLOW

Answer 8

ALL OF THE ABOVE

Question 9

HUMAN MACHINE INTERFACE IS EQUIPMENT THAT ALLOWS THE OPERATOR TO INTERFACE WITH THE SYSTEM

Answer 9

TRUE

Question 10

DATA TRANSMISSION RATE IS USUALLY EXPRESSED IN

Answer 10

BAUDS