bm1 stuff 2 Flashcards by Raul Medina

What are all BOSN billets?

How well did you know this?

Not at all

Perfectly

Meaning of the boathook and oar on the BF insignia

representative of boats (BOAT vol 1 pg 2-130)

How well did you know this?

Not at all

Perfectly

Meaning of compass rose on bf insignia

Representing leadership and direction (BOAT vol1 pg2-130)

How well did you know this?

Not at all

Perfectly

How date is recorded in EAL(electronic asset logbook)

Day month year / time z ex 19 FEB 2017 / 1200z

How well did you know this?

Not at all

Perfectly

What color is the boat record in ALMIS

yellow- pre-mission and servicing
Blue- mission record
Pink- maintenance record

How well did you know this?

Not at all

Perfectly

basic coxn UW hours on a 47 over 4ft

8 hrs (boat vol 1 pg2-28)

How well did you know this?

Not at all

Perfectly

Basic Coxswain UW standard time & Seas

10FT 30 kts no surf (boat vol 1 table 3-7 pg3-52)

How well did you know this?

Not at all

Perfectly

HX coxswain UW standard time and seas under 8 ft surf

20ft 50kts (boat vol 1 pg3-52)

How well did you know this?

Not at all

Perfectly

How many Side boys for governor?

8 (BM2 honors and ceremonies

How well did you know this?

Not at all

Perfectly

How many Side boys for Rear Admiral?

6 (BM2 honors and ceremonies)

How well did you know this?

Not at all

Perfectly

What Music for former POTUS?

Admiral’s March (BM2 honors and ceremonies)

How well did you know this?

Not at all

Perfectly

ALMIS- What do these mean

NMC_ Not Mission Capable. Reasons designated by:
• M - Unscheduled maintenance outside of Charlie period
• S - Supply
• D - Charlie period is always NMCD (Patrol Boats, Cutters,
Subsystems, and Cutter CBs)
• D - Depot Maintenance (Small Boats and Patrol Boat CBs)

How well did you know this?

Not at all

Perfectly

ALMIS What status is a boat put in when waiting for parts?

For Boats: If specific maintenance OTHER THAN depot maintenance is needed to restore operational capability, and the specified required maintenance or repair can commence and progress prior to the delivery of required parts, then NMCM shall be assigned. (SFLC EAL business rules process guide)

How well did you know this?

Not at all

Perfectly

ALMIS What status when winterized?

Nmcl- layup status

How well did you know this?

Not at all

Perfectly

Small munitions blank color?

Navsea sw010-af-ord-010)
Color Projectile Type
Unpainted Blank
Grey Armor Piercing-Incendiary
Green on Grey Armor Piercing-Incendiary
Black Armor Piercing
Blue Short-Range Training
Red API-Tracer
Orange Tracer
Brown Tracer
Purple Dim Tracer/API-DT
Green 5.56mm Ball (w/steel pene- trator)
Crimped Blank

How well did you know this?

Not at all

Perfectly

Tracer round color?

ORANGE/BROWN

How well did you know this?

Not at all

Perfectly

OBTT who make sure drill is done correctly?

a. Walk-Through Mode: Crews are notified of a drill and its objectives in advance. The entire drill is conducted at a slow pace with significant instruction from the OBTT.
b. Training Mode: Crews are not notified of a drill in advance. The drill is planned with OBTT intervention that is focused on training crew members. If the OBTT is uncertain as to how well a crew will perform during a drill, it is acceptable to begin in evaluation mode and drop back to a training mode, if necessary. If the OBTT is certain that the crew cannot pass a drill in evaluation mode, the drill should be planned and executed in training mode.
c. Evaluation Mode: Crews are not notified of a drill in advance and there is no planned intervention by the OBTT. The OBTT is focused on grading the proficiency of the crew. The OBTT can use “time outs” to pause a drill for safety, minor procedural corrections and real-world events. OBTT members can intervene by the use of leading questions to get otherwise proficient crews back on track. This intervention is brief in nature, does not cause the drill to drop into training mode or cause the crew to get off track. This type of intervention has also been called “reach through” training in the past.

How well did you know this?

Not at all

Perfectly

OBTT passing score

Drills completed with an 80% score or higher conducted in either evaluation or training mode can be entered into TMT for credit to meet quarterly, semiannual and annual periodicity requirements.

Drills/exercises scored with grades of 79% or less shall be repeated. If a drill is failed twice, then the best possible grade achievable is 80%. The final score of a drill is based on the last successful drill, not the average of all attempts. All failed drills will be repeated from the beginning.
CUTTER TRAINING AND QUALIFICATION MANUAL COMDTINST M3502.4J

How well did you know this?

Not at all

Perfectly

Parallel search csp is ——– track spacing from the axis?

How well did you know this?

Not at all

Perfectly

Breaking strength of the heaving line in the throw bag?

500lbs (BCSM 7-18 3/8” DBN WLL 500lbs)

How well did you know this?

Not at all

Perfectly

R&S PO Rank

E5 (RSS MANUAL)

How well did you know this?

Not at all

Perfectly

Close aboard for cutters and boats

600yds and 400 yds

How well did you know this?

Not at all

Perfectly

Full munitions count how often?

DAILY (BM2 ordnance)

How well did you know this?

Not at all

Perfectly

Swinging compass where write findings?

Performance record

How well did you know this?

Not at all

Perfectly

Award Form

CG 1650

OIC in trouble

All members who have had their certification removed for cause must wait a minimum of two years after removal to be eligible for recertification. (military assignments and authorized absensed)

How soon after making e6 can you sit for OIC Board?

BM 1’s with over two years time in grade may be scheduled for the review board. BM 1s who have less than two years’ time in grade but who have served satisfactorily for 12 consecutive months in a designated XPO position may also be scheduled for the review board. (Military assignments and authorized absences)

OIC package/ who makes changes

Commandant (CG-731) is the Headquarters program manager responsible for OIC review board procedures. Commandant (CG-731) will maintain the review board process with input from Commandant (CG-751) and the BM rating force master chief (RFMC) (military assignments and authorized absences)

Min # of ranges to run when swinging the compass?

MPC f12004.0 pg6 note: A min of 4 ranges (w/ reciprocal courses) are needed to yield deviation values for the cardinal points (NSEW) and intercardinal (se ne nw ne)

At what angle does wire rope from the sheave to the drum

FLEET ANGLE- Fleet angle is the angle between the center line that runs through the first fixed sheave perpendicular to the axis of the drum shaft and the line from the sheave to the extreme left or right side of the drum

How are safety chains on the trailer hooked up

a. Safety chains should be of the proper size to carry the gross weight of the trailer b. Ensure the safety chains are attached, crisscrossing under the coupler, to the frame of the tow vehicle. c. Shackles of the proper size are recommended to secure the safety chains to the hitch. If “S” hooks are used, the open face must face the trailer; otherwise they will detach if the tongue becomes uncoupled and under rides the tow vehicle. d. COAST GUARD TRAILERING MANUAL COMDTINST M11240.10

AOPS/TMT how long is password

8 characters (AOPS user guide pg 20)

What color is the boat record sheet in ALMIS

yellow- permission and servicing Blue- mission record Pink- maintenance record

How far do you unravel 3 strand to do a crown knot

12” (7-42 BCSM)

What is X when splicing DBN

Core comes out of cover (7-52 BCSM)

What is T when splicing DBN

Core back into cover from T-Z (7-52 BCSM)

When wanting to run 3 strand through a block freely what do you use on the end to prevent unraveling?

Permanent whipping (7-59 BCSM)

How many times do you stitch through the line on permanent whipping?

3 or more (7-59 BCSM)

SERA (senior enlisted reserve advisor) reports to whom?

OIC

Response to “BEADWINDOW” is :

Roger out

How to relay an urgent message over the radio

Pan pan UMIB

Contingency Coxswain is responsible for what mission?

Reservists (contingency coxswain doesn’t exist anymore)

Anchorage in a sheltered area extends UW time by what

50% (BOAT VOL 1 2-28)

Square knot reduces breaking strength by what percentage?

40% (table 7-6 pg 7-26 BCSM)

What MHz is channel 16

156.8 (COMMUNICATION WATCHSTANDER QUALIFICATION GUIDE)

How many gals of Combustible /Flammable

Maximum Quantity: Sixty (60) gallons of flammable products and one hundred and twenty (120) gallons of combustible products are the maximum quantity allowed to be stored in any one cabinet. Not more than three such cabinets may be placed in any work center or room. COATINGS AND COLOR MANUAL COMDTINST M10360.3D

How many pressure points in BCSM

How many storage cabinets in one building (paint

How many inches are your heels from your buttock when doing situps for boat crew

18” (3-3 BCSM)

Which is highly flammable?

Linseed oil

What is the strength of sisal line?

Second strongest

What know do you start a backsplice on 3 strand

Crown knot

When do you pick up a MOB from the windward side?

Confined space& leeward is not possible (16-9 BCSM)

When you slow down your pivot point goes where?

Aft (10-7 BCSM)

When you speed up your pivot point goes where

When the force is on the left side of the rudder is heavy which way does the bow go?

To port (10-12 BCSM)

How many ways can you pick up MOB?

Two basic approaches-leeward and windward (16-7 BCSM)

To spring out the stern what lines do you leave on? How many ways can you pick up MOB?

Bow and after bow

What light list is the Gulf?

Rust classes for corrosive classes

I, II, III, and IV which is worst

3 ways to characterize rust on a steel painted hull

Localized, pinpoint, scattered

A well spliced eye in DBN retains how much of original strength?

90-95% (pg7-26 BCSM)

What is in chapter 1 of the qual packet?

Chapter Title 1 Task Accomplishment Record for Boat Crew Member 2 Boat Crew Member Qualification Tasks 3 Boat Crew Member Trainee Study Guide BOAT II COMDTINST M16114.33A

Line used on coast guard boats is classified in two different ways?

Size and materials used (7-2 BCSM)

The towing boat should take what aspect to waves?

“Do not try to tow a vessel either directly into or directly down large seas. Tow on a course to keep the seas 30-45 degrees either side of dead ahead of dead astern. May require tacking” (17-9 BCSM)

Survivability in 50-60 degree water

1-6 hr (table 16-1 pg 16-25 BCSM)

Storm warning flag speed

48-63 kts (NOAA website)

According to BCSM what is ½ mile

SWEEP WIDTH?? (BCSM 15-21)

FT in a NM

1 nm= 6076ft (a-17 BCSM)

What direction are you going if the compass bearing is less than magnetic?

EAST (east is least 14-35 BCSM)

When free falling anchor how many fathoms do you fake out before letting it free fall?

Pay out the anchor to within 15 fathoms of seabed and free-fall the anchor the remaining distance when anchoring in depths exceeding 15 fathoms. Anchoring should not be done in depths exceeding 100 fathoms. (NAVAL SHIPS’ TECHNICAL MANUAL CHAPTER 581 ANCHORING JUN2014)

Cloud base rising means?

Clearing weather (table 12-3 12-11 BCSM)

Interim Coxswain?

60days at station (BOAT vol 1 pg 4-80)

Trailering weight designator?

GCWR- gross combined weight rating

Missions during there hrs are considered high risk

2300-0500 (BOAT vol 1 2-27)

Less than how many hrs will result in a accumulation of sleep debt?

Less than 6 hrs in a 24hr pd (BOAT vol 1 2-22)

How many access levels for AOPS

1. Unit level 2. Commanding officer level 3. Resource management level 4. HQ level

who sets min boat crew size standards for standard boats?

Commandant, area and district commands set for non standard (BCSM PG 1-2)

bm1 stuff 2 Flashcards

(78 cards)