CARS Flashcards
(92 cards)
Any part or component a part of the aircraft
Aeronautical product
A limit, life limit for aeronautical product
Airworthiness limitation
Info issued by Minister to direct airworthiness ex: recall
Airworthiness directive
Any instrument/mechanism/equipment not part of airframe/engine
ex: seats, generators
Appliance
Information regarding design, approved by Minister
Approved data
Standard of airworthiness for appliance/part
Canadian Technical Standard Order
Part that isn’t made for use as aeronautical product.
Commercial part
Fireproof plate with identification info
Identification plate
Part with limits, not exceed specified limits
Life limited part
Minister of Transport
Minister
Document issued by Minister,, approving design of replacement
Part design approval
Part made with specification
Standard part
Record the approval of change to type design
Supplemental type certificate
Info and spec to define features of an aeronautical product, to standard
type design
Where are two normal places to find an identification plate on aircraft
Visible to person on ground
Visible to person at main entrance or rear most entrance door
What are the four pieces of info that must be permanently marked on an identification plate?
Name of manufacturer
Manufacturer model designation
Type certificate number
Aircraft serial number
If an aircraft is modified according to a supplemental type certificate that changes the aircraft model designation, what must be fone to the aircraft identification plate?
-Add an additional identification plate
-name of person who modified
-New model designation
-supplemental type certificate number
Can you remove the identification plate from a damaged fuselage and install it on a serviceable fuselage?
Normally no, but applying for special authorization to Minister can result an exemption.
Can you remove an identification plate to paint the aircraft?
Yes.
You may without authorization, remove the identification plate for the purpose of performing work on aircraft.
What do you do if an identification plate becomes detached and lost mid flight?
Submit an application to Minister, with evidence of aircraft identification, for authorization to attach a replacement.
What info is required on identification plate for Aircraft propeller and engine?
Propeller:
name of manufacturer,
model designation, type certificate number, product serial number
Engine:
name of manufacturer, model designation, type certificate number, product serial number *power rating for engine by manufacturer
How is the requirement for identification for an aircraft part or appliance affected when there is not space available for the identification information?
Information can be placed on parts container or authorized release certificate
Application to the minister must be made to remove an identification plate from an appliance or are there exceptions to this regulation?
Exceptions are only for removal of plates for purpose of performing work.
Where can you find a description of where the registration markings are supposed to be located on a helicopter?
Cars standard 222.01(1)(d)