Ch.7 Building Regulations And Codes

Question 1

Hey care of that has been written by a group comprised of expert knowledgeable in the field, without reference to any particular geographical area

Answer 1

A model code

Question 2

What does a product received when a complete and total product is successfully tested

Answer 2

 listed label

Question 3

Another type of label that means that samples of the product were tested for certain types of uses only

Answer 3

Classified label

Question 4

Uses high-pressure hose stream to stimulate how well the assembly stands up to the impact from falling debris and the cooling in a writing effects of water

Answer 4

Hose stream test

Question 5

Test and write the surface of burning characteristics of interior finishes in other building materials by testing, in an arrow test chamber, a sample piece with a controlled flame at one end

Answer 5

Steiner tunnel test

Question 6

A number representing the amount of smoke generated as a material burns in the test chamber

Answer 6

smoke developed index

Question 7

What is the most fire resistant product

Answer 7

Class a

Question 8

Text a sample of carpet in the normal horizontal position and measures the flame spread in a corridor or exit way that is under the influence of a fully developed fire and adjacent space

Answer 8

Flooring radiant panel test

Question 9

What two material classes are defined by the flooring radiant panel test

Answer 9

Class one and class two

Question 10

A test that is required for all carpet sold and manufactured in the United States. It has sample of the carpet is placed in a draft protected cube and held in place with a metal plate with a 8 inch diameter hole. A timed methenamine pill is placed in the center and lighted. If the sample burns to within 1 inch of the metal plate, it fails the test

Answer 10

Methenamine pill test

Question 11

UL listed devices installed in ducks in air transfer openings that are designed to restrict the passage of smoke

Answer 11

Smoke dampers

Question 12

A wall assembly with fire resistance of one hour

Answer 12

Fire partition

Question 13

A vertical or horizontal assembly that is fire resistant rated and is designed to restrict the spread of fire, confined fire to a limited area, and a Ford safe passage for protected egress

Answer 13

Fire barrier

Question 14

A continuous vertical or horizontal membrane with a minimum fire resistance rating of one hour, designed to construct to resist the movement of smoke

Answer 14

 smoke barrier

Question 15

What is group a occupancy

Answer 15

Assembly

Question 16

What is Group B occupancy

Answer 16

Business

Question 17

What is Group E occupancy

Answer 17

Education

Question 18

What is group F occupancy

Answer 18

Factory and industrial

Question 19

What is Group H occupancy

Answer 19

Hazardous

Question 20

What is group I occupancy

Answer 20

Institutional

Question 21

What is group M occupancy

Answer 21

Mercantile

Question 22

What is group r occupancy

Answer 22

Residential

Question 23

What is group S occupancy

Answer 23

Storage

Question 24

What is group u occupancy

Answer 24

Utility

Question 25

How do you space a room that is ancillary to the main occupancy but does not exceed 10% of the floor area

Answer 25

Accessory occupancy

Question 26

Ancillary to the main occupancy and has the same classification is the nearest mean occupancy but poses a greater level of risk to that occupancy

Answer 26

Is it a no use area

Question 27

Used to describe any fire alarm fire extinguishing divisor system that is designed and installed to detect, control, or extinguish a fire, or to alert the occupants for the fire department that has a fire has occurred or any combination of these

Answer 27

Fire protection system

Question 28

A quarter inch thick wired glass in steel frames, or other types of glazing that meet the requirements of in FPA252, standard methods of fire test of door assemblies

Answer 28

Fire protection rated glazing

Question 29

Glass or other glazing material that has been tested as a part of the fire resistance rated wall assembly

Answer 29

Fire resistance rated glazing

Question 30

A component whose function is to prevent falls from the elevated area

Answer 30

Guard

Question 31

What is the minimum height of a guard

Answer 31

42 inches high and design such that its fear with 4 inches in diameter cannot pass through any opening up to a height of 36 inches

Question 32

Material that will ignite and burn, either as a flame or glow, and that undergoes this process in air at pressures and temperatures that might occur during a fire

Answer 32

Combustible

Question 33

And it’s simply have a fire door, fire window, or fire damper, including all required Anchorage, frames, sells, and hardware

Answer 33

Fire assembly

Question 34

A resistance rated vertical or horizontal assembly of materials designed to restrict the spread of fire and which openings are protected

Answer 34

Fire barrier

Question 35

A fire resistive component used to separate dwelling units in our two construction, guest rooms, or one construction, and tenant spaces in covered mall building; they are also used as corridor walls. Fire partitions generally are you required to have a minimum of one hour protection rated construction except in certain circumstances. They are similar to fire barriers, but requirements for support or not a strict

Answer 35

 fire partition

Question 36

The period of time an opening assembly, such as a door window, can contain a fire or maintain its integrity, or both, when tested in accordance with NFPA 252 for doors. And assembly that requires a fire protection rating must with stand for exposure and thermal shock as wooden assembly that required a fire resistance rating, but it need not withstand heat transfer mission as well as, columns, and floors do

Answer 36

Fire protection rating

Question 37

Glazing with either a fire protection rating or a fire resistance rating

Answer 37

Fire rated glazing

Question 38

 The property of a material or simply to a standard resist the spread of fire or give protection from it

Answer 38

Fire resistance

Question 39

If you heard of time a building components such as a wall, floor, roof, beam or column can find a fire and maintain it structural integrity, or both when tested in accordance with the codes. This is different from the fire protection rating, which involves protected openings assemblies

Answer 39

Fire resistance rating

Question 40

Should not be used as a noun. As an adjective, it should only be used as a modifier with define compound terms such as fire retardant treated wood

Answer 40

Fire retardant

Question 41

The ability to withstand flame in pigment or gift protection from it. Surprised individual materials as well as combinations of components when tested with

Answer 41

Fire resistance

Question 42

Should not be used as a noun. As an adjective, it should only be used as a modifier with defined compound terms such as flame retardant treatment

Answer 42

Flame retardant

Question 43

The propagation of flame over a surface

Answer 43

Flame spread

Question 44

The numerical value assign to a material tested in accordance with the building codes

Answer 44

Flame spread index

Question 45

Capable of burning with a flame and subject to easy ignition and rapid flaming combustion

Answer 45

Flammable

Question 46

Material that will not ignite and burn one subject to a fire. The IVC classified material is this only if it is tested in accordance with the codes at 750°C, or if it has a structural base of non-combustible material with a surfacing not more than 1/8 inch dick that has a flame spread index no greater than 50

Answer 46

Noncombustible

Question 47

Includes picture molds, chair rails, baseboards, handrails, door and window frames, and similar decorative or protective materials used in fixed applications

Answer 47

Trim