Chapter 14 : Maintenance Punlocations Flashcards

(69 cards)

1
Q

What FAA approved document gives the leveling means to be used when weighing an aircraft

A

Type certificate data sheet

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

What is the means by which the FAA notices the aircraft owners and other interested persons of unsafe conditions and prescribes the condition under which the product may continue to be operated

A

Airworthiness thiness directives

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

Which is an appliance major repair

A

Overhaul of a hydraulic pressure pump

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

Which maintenance action is an airframe major repair

A

The repair of portions of skin sheets by making additional Seams

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

An aircraft was not approved for return to service after an annual inspection and the owner wanted to fly the aircraft to another maintenance Base. Which statement is correct

A

The owner must obtain a special flight permit

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Each person performing an annual or 100 hour inspection shall use a checklist that contains at least those items in the appendix of

A

14 CFR part 43

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

When a discrepancy list provided to an aircraft owner or operator after inspection is completed, it says in effect that

A

Except for these discrepancies, the item inspected is airworthy

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

Airworthiness directives are issued primarily to

A

Correct an unsafe condition

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

A supplemental type certificate may be issued to more than one applicant for the same design change providing each applicant shows compliance with the applicable airworthiness requirement
An installation of an item manufactured in accordance with the technical standard order system requires no further approval for installation in a particular aircraft

A

Only number 1 is true

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

Primary responsibility for compliance with airworthiness directives lies with the

A

Aircraft owner or operator

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

An aircraft type certificate data sheet contains

A

Location of the datum

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

When an airworthy (at the time of sale) aircraft is sold, the airworthiness certificate

A

Is transferred with the aircraft

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

Specifications pertaining to an aircraft model manufactured under a type certificate of which less than 50 are shown on the FAA aircraft registry can be found in the

A

Aircraft listing

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

Where are technical descriptions of certificated propellers found

A

Propeller type certificate data sheet

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

What information is generally contained in aircraft specifications or type certificate data sheets

A

Control surface movements

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

Placards required on aircraft are specified in

A

Aircraft’s specifications or type certificate data sheets

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

Technical information about older aircraft models of which no more than 50 remain in service can be found in the

A

Aircraft listing

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

The FAR requires approval after compliance with the data of a supplemental type certificate
An installation of an item manufactured in accordance with the technical standard order system requires no further approval form installation in a particular aircraft

A

Only number one is true

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

Which regulation provides the airworthiness standards for an airplane certified in the normal category

A

14 CFR part 23

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

Propellers are not included in the airworthiness directive system
A certificated powerplant mechanic may make a minor repair on an aluminum propeller and approved for return to service

A

Only number 2 is true

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q

An aircraft mechanic is privileged to perform major alternations on U.S certificated aircraft, however the work must be done in accordance with FAA approved technical data before the aircraft can be returned to service. Which is not approved data

A

AC 43.13- 2B

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q

What is the maintenance recording responsibility of the person who complies with an airworthiness directives

A

Make an entry in the maintenance record of that equipment

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
23
Q

Manufacturer’s data FAA publications such as airworthiness directives type certificate data sheets and advisory circulars are all approved data
FAA publications such as technical standard orders, airworthiness, directives type certificate data sheets and aircraft specifications and supplemental type certificate are all approved data

A

Only number 2 is true

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
24
Q

The air transport association of America specifications number 100
Establishes a standard for the presentation of technical data in maintenance manuals
Divides the aircraft into numbered systems and subsystem in order to simplify locating maintenance instructions

A

Both number 1 and 2 are true

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
25
Aviation maintenance alerts (formerly general Aviation airworthiness alerts)
Provide information about aircraft problems and suggested corrective actions
26
Which of the following includes all the regulatory definitions of "maintenance"
Overhaul, repair, parts replacement, inspection and preservation
27
What does the type certificate data sheet designation code "2PCSM" mean
Two places (number of seats) closed, sea, monoplane
28
Type certificate data sheets are issued for which of the following
Aircraft, engines, and propellers
29
The action required by an AD may take what form Inspection, part replacement, design modification, changing operating produce, overhaul change in the content form and disposition of aircraft maintenance records
Inspection, parts replacement design modifications change and operating procedures
30
The following words are an example of what kind of statement in AD required within the next 25 hours time and service after the effect of data this AD unless already accomplished
Compliance
31
Which of the following are sentences as authorization to debate from an aircraft original type design FAA form 337, supplemental type certificate, airworthiness directive, typical standard order
FAA 41337 supplemental types certificate airworthiness directive
32
The following is a table airspeed limits as given in FAA issued aircraft specification Normal operating speed 260 Knotts Never exceeded speed 293 knots Maximum landing gear operating speed 174 knots Maximum flap extended speed 139 knots
139 knots
33
An aircraft has a total time and service of 468 hours to everything is directive given was initially complied with at 454 hours in service How many additional hours and service may be accumulated before the airworthiness directive must again be complied with
186
34
A repair as performed on aircraft shall mean
The Restoration of the airframe to a condition for safe operation after damage or deterioration
35
The replacement of fabric on fabric covered parts such as wings fuselage stabilizers or control surfaces is considered to be a
Major repair even though no other alternation or repair is performed
36
Which is classified as a major repair
The splicing of skin sheets
37
The replacement of a damaged vertical stabilizer with a new identical stabilizer purchase from the aircraft manufacturers considered a
Miner repair
38
Who is responsible for determining the materials used in aircraft maintenance and repair are of the proper type and conform to the appropriate standards
The installing person or agency
39
Which of these publications contains standards for protrusion of bolts studs and screws through self-locking nuts
AC 4313 1B
40
Third person on the damaged in your mouth identical engine non-purchase from the aircraft manufacturer is considered a
Minor repair
41
Steven wurtz or an example of what kind of statement in AD model 172 airplanes serial numbers 36216336769 that have not been modified with Cessna service kit SK 172-10 or SK 172-10A certificated in any category
Applicability
42
What is the regulatory definition of preventative maintenance
Simple or minor preservation operations and they replacement of small standard parts not involving complex assembly operations
43
Where is the record of compliance with airworthiness directives or manufacturer service bulletins normally indicated
Aircraft maintenance records
44
If work performed on aircraft has been done satisfactory the signature of an authorized person on the maintenance records for maintenance or alternations performance constitutes
Approval for return of service only for the work performed
45
During an annual inspection if a defect is found which makes the aircraft an errority the person disapproving must
Provide a written notice of the defect to the owner
46
Where should you find this entry "Removed the right wing from the aircraft and removed skin from the outer 6 feet. Repaired buckled bar 49 in from tip and accordance was figure 8 in the manufacturer structural repair manual number 28-8
FAA form 337
47
Which aircraft record entry is the best description of the replacement of several damaged heli coils in a casting
Right 1/4-20 inch standard heli-coils were replaced The damage inserts were extracted the tapes hole gauged then new inserts installed and tangs removed
48
Which aircraft record entry best describes a repair of a dent in a tubular steel structure dented at a cluster
Welded a reinforcing plate over the dented area
49
If more space is needed for a work description Entered on FAA form 337 what information should be included on the attached sheets in addition to the rest of the work description
Aircraft nationality registration mark and the date the word was accomplished
50
For aircraft operated under part 91 with differences there if any between the record entry requirements for maintenance and the record entry requirements for inspections beyond the description of the work performed in the type and extent of inspection
Aircraft total times required to be included only in the inspection entry
51
For aircraft operated under part 91 when is aircraft total time required to be recorded in aircraft maintenance records
After satisfactorly completing inspections
52
When a 100-hour inspection is completed if separate maintenance records for the airframe power plant and propeller are maintained where is the entry for the inspection recorded
In each record
53
Which statement is true regarding the requirements for maintenance record format
Any format that provides record continuously and includes the required information maybbe used
54
Which statement is true regarding the use of FAA form 337
FAA form 337 is not authorized for used with other than US registration aircraft
55
Who was responsible for making me entry in the maintenance records after an annual 100-hour or progressive inspection
The person approving or disapproving for return of service
56
You want improving for return to service after maintenance or alternation the improving person must enter in the maintenance record of the aircraft
A description of work performed date of completion the name of the person performing the work signature certificate number and kind of certificate held
57
What action is required when a minor repairs performed on the certificate aircraft
An entry in the aircraft maintenance record is required
58
After making a certain repair to an aircraft engine that is to be returned to service an FAA form 337 is prepared how many copies are required and what is the disposition of the completed forms
Two; one copy for the aircraft owner in one copy for the FAA
59
Who was responsible for upkeep of the required maintenance records for an aircraft
The aircraft owner
60
An FAA form 337 is used to record and document
Major repairs and major alternations
61
After a mechanic holding an airframe and power plant rating completes a hundred-hour inspection what action is required before the aircraft is return two service
Make the proper entries in the aircraft's maintenance record
62
What is the status of data used as a basis for approving major repairs or alterations for return to service
Data must be FAA approved prior to its use for that purpose
63
When work is performed on an aircraft that necessates the use of FAA form 337 who should prepare the form
The person who performs are supervises the work
64
What is / early actions concerning money repairs performed on a certified aircraft FAA form 337 must be completed Adrian must be made in the aircraft maintenance record The owner of the aircraft must submit a record for all my reversity FAA at least annually
Entries must be made in the aircraft maintenance record
65
In order to reconstruct loss or destroyed aircraft maintenance records what is necessary to establish
Total time in service of the airframe
66
A certificated mechanic without inspection authorization who signs the appropriate block on FAA form 337 is doing what
Certifying that the work was done in accordance with the requirements of 14 CFR part 43
67
For aircraft operated under part 91 which of the following records must be retained and transferred with the aircraft when it is sold
Records of the current status of applicable ADs and date and time on recurring AD's are next due
68
How long are AD compliance records required to be kept
They shall be retained and then transferred with the aircraft when it is sold
69
When is a mechanic responsible for checking AD compliance
Link is for me and inspection required under part 91 125 and 135