chapter 4 Flashcards
(11 cards)
Why are compressor washes performed?
To remove any contaminants from the compressor section and improve engine performance.
Common methods include fluid wash and abrasive grit wash.
How can you tell if a turbofan or turbojet engine is out of trim?
There will be a high exhaust gas temperature at the target engine pressure ratio for takeoff power.
Name the different types of compressor blade damage that may be found during inspection.
- Dents
- Cracks
- Galling
- Pitting
- Scratches
- Burrs
- Burns
- Gouges
What kind of markers can be used to mark the parts in hot and cold sections during repair?
- Layout dye
- Felt tip marker
- Chalk
How does relative humidity affect turbine engines?
Negligible effect.
What criteria determines replacement of life limited turbine engine components?
- Cycles
- Hours
- Calendar time
If turbine blades are removed from a turbine disc, why should they be re-installed in the same location?
To maintain the balance of the turbine wheel.
How are gas turbine engine tachometers calibrated?
They are calibrated in percent r.p.m.
On a turbine engine, what is the engine pressure ratio and what does it indicate?
It is the ratio between the total inlet pressure and total turbine exhaust pressure and indicates the thrust developed by the engine.
On a turbine engine, what does exhaust gas temperature (EGT) indicate and how is it obtained?
EGT is the average temperature of the turbine discharge gases and is obtained by thermocouples placed near the turbine exit.
Can the EGT system on a turbine engine be checked without running the engine?
Yes, by checking the resistance of the thermocouples and circuits.
