CHEM

Question 1

How does an aircrew member wear the AERP hood in respect to the CWU-66/P when flying in ejection seat aircraft?

Answer 1

hood is under it

Question 2

What actions should the crew member take if the aircraft oxygen supply fails while they are using AERPs?

Answer 2

put pigtale in portiable oxygen bottle, activate emeregency oxygen, or enter non oxygen flight mode

Question 3

How often do you inspect AERP equipment thats in storage?

Answer 3

annual visual

Question 4

What substance must you apply to the exposed surface of the microphone gasket and pass thru gaskets during replacement?

Answer 4

silastic adhesive

Question 5

What is the required torque of the drinking pass thru strap assembly securing nuts?

Answer 5

5in/lbs

Question 6

How do you detect leaks on the hood assembly?

Answer 6

leak check solution

Question 7

How should the aircrew members facial muscles be while measuring his face length?

Answer 7

relaxed with jaw lightly closed

Question 8

Where do you position the tear away strip pull knobs during fitting?

Answer 8

under lower harness straps

Question 9

Who is responsible for the selection of the ACCA sight?

Answer 9

base CE emergency management and readiness fliight

Question 10

What do you do to speed up layout time requirements?

Answer 10

color coat CAPs equipment

Question 11

What is the M295 decon kit

Answer 11

charcoal impreginated mitt

Question 12

How many areas are in the ACCA

Answer 12

4

Question 13

What are the three main concepts of the C-RW (counter radioligical war fare) concept paper?

Answer 13

• ORM to taylor actions
• educate and protect personel
• use existing specified teams and resources

Question 14

The information in the C-RW concept paper is designed to do what?

Answer 14

complement, not conflist with other elements of AF C-CBRN

Question 15

Define mitigation

Answer 15

an ongoing process and is considered a part of every pahse of incident management

Question 16

How many sizes does the MBU-19/P come in?

Answer 16

4

Question 17

How many VDC is required to operate the CQU-7/P blower assembly when connected to an aircraft power supply?

Answer 17

28+-4

Question 18

What position on the MXU-835/P comm subsystem is listen only?

Answer 18

2nd

Question 19

How many modes of operation does the aircrew eye/respiratory protection (AERP system have?

Answer 19

4

Question 20

A CQU-7/P blower failure is indicated to the wearer by

Answer 20

loss of lens demist and increase in breathing resistance

Question 21

How often do you preform operation checks on the AERP ensemble that are fitted for contingency ops?

Answer 21

18 months

Question 22

What is the max number of times you can lander the CWU-66/P aircrew chemical ensemble (ACE)

Answer 22

10

Question 23

What is the min hours of cure them for the adhesive when replacing the plenum tubes during repair of the MBU-19/P mask

Answer 23

12

Question 24

By what part of an inch must the edges overlap when repairing tears on the CWU-66/P-77/P aircrew chemical ensemble (ACE)

Answer 24

1/4

Question 25

What torque is required when installing the bayonet and strap assembly to the MBU-19/P mask?

Answer 25

4-6 in/lbs

Question 26

How many hours must be allowed for the silastic adhesive to cure when you replace the microphone gasket on the AERP equipment

Answer 26

24

Question 27

How should AERP tear away pull knobs be positioned during wear

Answer 27

under lower harness straps

Question 28

When fitting the MBU-19/P aircrew chemical ensemble to a non helmeted system the face piece should be trimmed no more than what fraction of an inch during the first cut?

Answer 28

1/8

Question 29

What is the max length in inches the MUB-19/P mask adjustment strap can be after proper fit is made?

Answer 29

3

Question 30

What is the length of the CWU-66/P If a male is over 6ft1in?

Answer 30

long

Question 31

The purpose of the ACCA is to provide?

Answer 31

detection, contamination control, and processing provisions for aircrews.

Question 32

When setting up an ACCA once the consistent wind direction is determined, the processing direction is established at a

Answer 32

45-60 degree deviation towards the wind direction

Question 33

Who is responsible for dividing manpower into groups or teams by color when setting up an ACCA

Answer 33

ACCA manager

Question 34

What item is not used for decon of equipment in field

Answer 34

solution of mild detergent and water

Question 35

A min of how many trained technicians are required to run standard ops at an ACCA

Answer 35

5

Question 36

As an AFE journeyman what is you first responsibility upon arrival of aircrew members from ground ops when chem/bio contamination is suspected

Answer 36

apply all available decon methods to detect contaminates of personnel and assets

Question 37

Up to how many people may be in area 1 of ACCA line?

Answer 37

3

Question 38

What area of the ACCA is the boot and protective over garment removal phase?

Answer 38

3

Question 39

How many main components does the C-RW concept of ops consist of?

Answer 39

3

Question 40

What is the min hrs following an event you might get specialized federal assets?

Answer 40

12