Configuration

Question 1

What steps completes a QoS configuration?

Answer 1

enabling a QoS profile on the egress interface of the traffic identified for QoS treatment

Question 2

On which type of interface is QoS always enabled and enforced?

Answer 2

on the egress interface for a traffic flow

Question 3

If you are limiting employees’ download traffic from a specific internet website, what would be the egress interface?

Answer 3

the firewall’s internal interface, as the traffic flow is from the Internet, through the firewall, and to the company internal user network

Question 4

In the traffic processing on firewall, at which stage is QoS applied?

Answer 4

after the firewall has enforced all other security policy rules, including Network Address Translation (NAT) rules

Question 5

How does firewall evaluate QoS rules?

Answer 5

based on the contents of the original packet, such as pre-NAT source IP, pre-NAT source zone, pre-NAT destination IP, and post-NAT destination zone

Question 6

How do you configure QoS policy? With pre-NAT or post-NAT addresses and zones?

Answer 6

pre-NAT; do not configure the QoS policy with the post-NAT addresses

Question 7

Can you configure a schedule when QoS policy should be applied?

Answer 7

yes