CPI Flashcards
__________ process is used for the commercial production of nitric acid by the catalytic oxidation of ammonia.
Ostwald’s
The catalyst used in shift converter is
nickel
DDT stands for
dichloro-diphenyl-trichloroethane
Bleaching action of bleaching powder is due to its __________ properties.
oxidising
Which of the following is not required in the manufacture of soda ash by Solvay process ?
Nitric acid
The purpose of tanning in leather industry is to
stiffen the leather
Main constituent of dolomite is
MgCO3
Conversion of CO to CO2 by steam in presence of a catalyst is called
shift conversion
Portland cement consists mainly of
CaO & SiO2
Cumene (isopropyl benzene) is made by
propylene alkylation of benzene.
Mannheim furnace is used in the manufacture of
hydrochloric acid
Thermosetting materials
are cross-linked molecules
Nickel is not used as a catalyst in the
Ostwald’s process of HNO3 manufacture.
__________ iron is the purest form of iron.
Wrought
Alcohol is produced by the
hydrolysis of an ether
Sulphur removal by heating of pyrite ore in presence of air is called its
roasting
Pick out the true statement pertaining to water treatment.
Normally, the turbidity is removed by adding a coagulent prior to sedimentation.
ransportation of 35% oleum during winter suffers from the problem of freezing, which can be overcome by the addition of small quantity of
nitric acid
The most stable allotropic form of phosphorous is the __________ phosphorous.
black
Function of thinner in a paint is to
suspend pigments & dissolve film forming materials
Rancidity of the fatty oil can be reduced by its
hydrogenation
Phenol formaldehyde
employs condensation polymerisation
Shrinkage volume in cement setting does not depend upon the
sand to cement ratio
A mineral is termed as ‘ore’, if
a metal can be economically extracted from it