Digital Map Flashcards
List two things that are stored on the Mass Memory Server?
Digital Map and terrain data
Which CDU page is used to change the digital map center of interest?
The Digital Map center of interest can be returned to the aircraft current position by selecting RS3 on the DIG MAP 1/2 page
The Embedded Digital Map Generator is located inside which Core CAAS component
General Purpose Processor Unit (GPPU) -> Processor Switch Module (PSM)
What core CAAS component stores Digital Map and terrain elevation data?
Mass Memory Server
True or False: The TACMAP is only displayed in full screen with the HSD off.
True
When is the SYMBOL DB NEAR FULL advisory displayed?
Appears when the tactical symbol data base is 95% capacity
describe the Control Image Base (CIB).
Contains high resolution digital satellite images that have been merged together (rectified grayscale)
What are the names of each of the three movable map modes?
CHART, DTED, CIB
What is DTED?
Digital Terrain Elevation Data
Which bezel key accesses the two Overlay (OVLY) control layers?
B4
Yes or No: Does the active flight plan have to be displayed on the map to perform a DIRECT TO?
No
To change a FRAME image using the CDU, which CDU page must be displayed?
DIG MAP CNTL 2/2
How many Map Control layers are available for the Digital Map?
2
How many moving map modes are available?
3
The CDU control function (bezel key labeled CDU) is available on which Map Control layer?
Planning Altitude (Map Control Layer 2/2)
What is the default map channel for MFD 2?
CH 2
What is the only function that asks for confirmation before processing the request?
show Hidden Symbol
Which MFD control layer must be selected to toggle the SYMB (Symbol Filters) between ALL, NONE, or FLTR (FILTER)?
OVLY 2
What happens when the Navigation Symbology function is selected on Overlay 1?
Navigation symbols that are not part of the active flight plan appear
DIG MAP Control and DIG MAP Video can be accessed from which CDU page?
CDU SENSR page
How are the DIG MAP control pages accessed?
SENSR then CONTROL (LS3)
Name at least two ways the SLEW function can be turned on?
a) Performing a CENTER ON function
(b) Performing a Flight Plan Navigate function (Scrolling through FPPs)
(c) Selecting the SLEW OFF bezel key on Map Control layer 2/2
True or False: Position Update is only available when GPS AIDING is deselected.
True
What must the operator do before the TDL MARK report can be accessed?
Log-in
