Dump Flashcards by Chad Beavens

Threat monitoring in physical access security can be based upon which three of these? (Choose three.)
A. doors
B. badges
C. age
D. weather
E. height
F. fingerprints

A. doors
B. badges
F. fingerprints

How well did you know this?

Not at all

Perfectly

A video engineer needs to locate the running version of the Cisco VCS. Under which tab in the Cisco VCS
web interface is this information contained?
A. Applications
B. Status
C. System
D. Configuration

B. Status

How well did you know this?

Not at all

Perfectly

Which two feature keys are valid for both Cisco TelePresence MCU and Cisco TelePresence Server? (Choose two.)
A. video firewall
B. web conferencing
C. encryption
D. cluster support
E. third-party interoperability

C. encryption

D. cluster support

How well did you know this?

Not at all

Perfectly

A customer wants to know the options that are available when using all Cisco TelePresence SX Series endpoints in a multisite conference that is hosted locally. What are three capabilities of the Cisco TelePresence SX20 endpoint during a native multisite call? (Choose three.)
A. ability to change the local layout to prominent mode
B. ability to change the layout of remote participants to prominent mode
C. ability to change the Self-View status of remote participants
D. ability to control the camera of remote participants
E. ability to change the contact status of remote participants
F. ability to change the layout of remote participants to multisite mode

A. ability to change the local layout to prominent mode
B. ability to change the layout of remote participants to prominent mode
D. ability to control the camera of remote participants

How well did you know this?

Not at all

Perfectly

XConfigurator Cameras Camera 1 Brightness Level 1 command has not effect. Why?
A. brightness mode must be set to manual
B. codec must be rebooted for the changes to take effect
C. display brightness was changed for the remote end
D. default brightness level is 1

A. brightness mode must be set to manual

How well did you know this?

Not at all

Perfectly

Which Cisco TelePresence Multipoint Control Unit Layout view mode gives prominence to one conference participant over the other conference participants while still allowing conference participants to view multiple participants at the same time?
A. enhanced continuous presence
B. active speaker
C. continuous presence
D. room switching
E. speaker switching

A. enhanced continuous presence

How well did you know this?

Not at all

Perfectly

What technology use for pair iPad and cisco room system:
A. Wi-Fi
B. Bluetooth
C. cisco proximity

C. cisco proximity

How well did you know this?

Not at all

Perfectly

Which CLI command must the engineer run on the SX20 to verify its registration status?
A. xCommand
B. xStatus
C. xConfiguration
D. xEvent

B. xStatus

How well did you know this?

Not at all

Perfectly

An end user using C series codec wants to change the participant layout for a meeting hosted on a Cisco
TelePresence Server. What are three valid layout options available in codec web interface? (Choose three.)
A. single screen
B. loudest speaker
C. rolling
D. equal
E. custom
F. overlay

A. single screen
D. equal
F. overlay

How well did you know this?

Not at all

Perfectly

Which tab can be used in order to check the call statistics for the Cisco TelePresence Codec C60?
A. Diagnostics
B. Configuration
C. Call Control
D. Maintenance
E. The GUI cannot be used to view call statistics.

C. Call Control

How well did you know this?

Not at all

Perfectly

Which three features are supported by the Cisco Video Surveillance Encoding Server? (Choose three.)
A. IP and analog cameras 
B. MPEG-2 and MPEG-4 encoding
C. archiving
D. motion detection
E. clustering
F. virtual matrix

A. IP and analog cameras
C. archiving
D. motion detection

How well did you know this?

Not at all

Perfectly

Which all-in-one dual-screen solution can be used for an average meeting room without the need for external monitors?
A. MX700
B. MX300G2
C. EX90
D. SX80
E. TX9000
F. MX200G2

A. MX700

How well did you know this?

Not at all

Perfectly

Which component provides flexible options for storing video and audio using a combination of network-attached storage, direct-attached storage, and SAN storage deployments?
A. Cisco Video Surveillance Media Server
B. Cisco Video Surveillance Virtual Matrix Software
C. Cisco Video Surveillance Storage System
D. Cisco Video Surveillance Transcoding and Encoding Server
E. Cisco ISR Video Management and Storage Module

C. Cisco Video Surveillance Storage System

How well did you know this?

Not at all

Perfectly

Which three standards are supported for streaming live video on Cisco TCS? (Choose three.)
A. H.265
B. H.261
C. H.264
D. H.263
E. H.262
F. H.270

B. H.261
C. H.264
D. H.263

How well did you know this?

Not at all

Perfectly

Acoustic measurements for ambient noise were taken on a candidate for an Immersive Cisco TelePresence room. The numbers on the floor plan represent the dBA readings for each of the six areas of the room.
Considering Cisco best practices, what can you conclude about the current acoustic situation in the room?
A. Only one area is within the noise levels that are recommended by Cisco.
B. Only one area is not within the noise levels that are recommended by Cisco.
C. All areas are within the noise levels that are recommended by Cisco.
D. Two areas are within the noise levels that are recommended by Cisco.

A. Only one area is within the noise levels that are recommended by Cisco.

How well did you know this?

Not at all

Perfectly

What do you call the process when one bridge calls into another bridge so that participants on both bridges can see and hear each other?
A. traversing
B. interworking
C. flowing
D. cascading

D. cascading

How well did you know this?

Not at all

Perfectly

A network administrator is troubleshooting a video issue from the Cisco VCS CLI and wants to see the ongoing calls. Which command should the administrator use?
A. xconfiguration calls
B. xcommand calls
C. xcalls status
D. xstatus calls

D. xstatus calls

How well did you know this?

Not at all

Perfectly

Which of these devices require configuration in order for an endpoint to initiate a Multiway conference?
A. endpoint only
B. Cisco TelePresence Video Communications Server only
C. multipoint control unit only
D. endpoint and multipoint control unit only
E. endpoint and Cisco TelePresence Video Communications Server only
F. endpoint, Cisco TelePresence Video Communications Server, and multipoint control unit

F. endpoint, Cisco TelePresence Video Communications Server, and multipoint control unit

How well did you know this?

Not at all

Perfectly

Which two video endpoints can you set back to factory reset by using physical button presses? (Choose two.)
A. Cisco TelePresence C40
B. Cisco TelePresence EX90
C. Cisco TelePresence C60
D. Cisco TelePresence SX20
E. Cisco TelePresence C90

B. Cisco TelePresence EX90

D. Cisco TelePresence SX20

How well did you know this?

Not at all

Perfectly

Management would like to find out when a particular multipoint control unit feature was enabled and who enabled it. Which menu option is the most appropriate when searching for that information?
A. Event Display Filter
B. Audit Log
C. Event Log
D. Syslog

B. Audit Log

How well did you know this?

Not at all

Perfectly

A customer is looking for a video conference solution that includes video streaming. What are the two devices that when used together, provide streaming capability? (Choose two.)
A. VCS
B. TCS
C. TS
D. MCU 4500
E. TMS

B. TCS

D. MCU 4500

How well did you know this?

Not at all

Perfectly

Which Cisco Video Surveillance device is responsible for providing video streams to monitors after the respective layouts and views are received by the monitors?
A. Cisco IP Video Surveillance Operations Manager
B. Cisco IP Video Surveillance Virtual Matrix Viewer
C. Cisco Video Surveillance Manager
D. Cisco Video Surveillance Media Server

D. Cisco Video Surveillance Media Server

How well did you know this?

Not at all

Perfectly

Which CLI command must be used to configure the network settings on a Cisco TelePresence 4500 MCU?
A. Static A   []
B. Network ip
C. Xconfig network address
D. Xconfig network address

A. Static A []

How well did you know this?

Not at all

Perfectly

An immersive video room requires acoustic remediation because there is noticeable reverb present. What type of acoustic paneling does Cisco recommend to provide remediation?
A. NRC rating greater than 0.75
B. NRC rating greater than 0.5
C. NRC rating less than 0.75
D. NRC rating less than 0.5

A. NRC rating greater than 0.75

How well did you know this?

Not at all

Perfectly

``` Which two tools can be used to extract traces from a Cisco Unified Communications Manager server? (Choose two.) A. RTMT B. TraceRT C. Wireshark D. CLI E. Syslog ```

A. RTMT | D. CLI

Cascading feature with TP Conductor and TP Server has 2 limitations: A. Multi-screen endpoints are supported with more than 3 TP Server cascading B. Scheduling conference is not supported C. Ad-hoc conferencing are supported with more than 3 TP Server cascading D. Ad-hoc conference is not supported E. Only single screen endpoints supported through cascading link

D. Ad-hoc conference is not supported | E. Only single screen endpoints supported through cascading link

``` An engineer is configuring a live stream from a multiparty conference that users can watch live in their web browser. Which two products can provide native live streaming in this delivery format? (Choose two.) A. Cisco Video Communications Server B. Cisco TelePresence Server C. Cisco TelePresence MCU D. Cisco TelePresence Content Server E. Cisco Multiparty Media Server F. Cisco TelePresence Conductor ```

C. Cisco TelePresence MCU | D. Cisco TelePresence Content Server

You are deploying a Cisco VCS Expressway with the Advanced Networking option key into two separate DMZs. Gateways for all networks are the lowest usable IP address in the subnet. While you are logged in as an admin user, which command should you enter into the CLI, to enable IP routing to the Cisco VCS Control and nothing else on the internal network? A. xConfiguration IP Gateway: 172.18.105.1 B. xConfiguration RouteAdd Address:192.168.10.25 PrefixLength:16 Gateway: 172.18.105.1 Interface: LAN1 C. xCommand RouteAdd Address:192.168.0.0 PrefixLength:16 Gateway: 172.18.105.1 Interface: LAN1 D. xCommand RouteAdd Address:192.168.10.25 PrefixLength:32 Gateway: 172.18.105.1 Interface: LAN1

D. xCommand RouteAdd Address:192.168.10.25 PrefixLength:32 Gateway: 172.18.105.1 Interface: LAN1

``` When you configure a zone for firewall traversal, which type of zone is the Cisco VCS-C configured for? A. client B. server C. proxy D. gateway E. neighbor ```

A. client

An engineer wants to know if there is a way to determine the optical zoom of a Cisco TelePresence SX20 remotely. Which two methods will retrieve this information? (Choose two.) A. From the CLI, run xstatus. B. From the CLI, run xconfig. C. From the web GUI, choose Configuration > System Status > Camera. D. From the web GUI, choose Configuration> Camera > Status. E. From CLI, run xcommand camera.

A. From the CLI, run xstatus. | C. From the web GUI, choose Configuration > System Status > Camera.

``` Which two parameters of the license management set log level Product_instances CLI command on the CiscO Prime License Manager are valid? (Choose two.) A. warning B. error C. emergencies D. critical E. alert ```

A. warning | B. error

A client requires a versatile desktop video system that supports dual monitors and the multisite option. Which device should be recommended to the customer? A. Jabber Video client with PrecisionHD camera B. Cisco TelePresence EX60 system C. Cisco TelePresence MX200 system D. Cisco TelePresence EX90 system

D. Cisco TelePresence EX90 system

``` An engineer must ensure that a user can create content playlists for Digital Signs and Show and Share. Which Cisco Digital Media Suite component allows playlists to be created? A. Cisco DMD B. Cisco DMM C. Cisco TMS D. Cisco MXE ```

B. Cisco DMM

``` Which type of Cisco VCS log shows call routing decisions that are made based on Cisco VCS search rules? A. Event Log B. Configuration Log C. Network Log D. System Log ```

C. Network Log

When placing a call from Cisco Jabber Video for TelePresence to the Cisco TelePresence System Codec C40, which FECCs are available? A. Only zoom-in and zoom-out are available. B. Only left and right are available. C. Only up and down are available. D. No FECC is available. E. Left, right, up, down, zoom-in, and zoom-out are all available.

E. Left, right, up, down, zoom-in, and zoom-out are all available.

``` You want to find a list of all recent call attempts on a Cisco VCS Expressway and the details of attempts to route these calls. You want to know if the requested address was found and if any transformations occurred. Which page on a Cisco VCS Expressway gives you all of this information? A. Policy Services B. Registration History C. Search History D. Zones ```

C. Search History

``` A customer requests a configuration that enables users to easily add a third party to an existing call. The environment contains only three Cisco TelePresence C40 codecs and one Cisco VCS. To achieve the customer's requirements, which feature should be added? A. Cisco MultiWay B. Cisco TelePresence Conductor C. Cisco TMS D. Cisco Multisite E. Cisco VCS Expressway ```

D. Cisco Multisite

``` An important Cisco TelePresence video multipoint call is in progress and you are getting complaints of pixilation of the video and poor audio quality on one of the involved systems. Which page would be a good place to start for troubleshooting the issue on the affected endpoint? A. Call Control B. Diagnostics C. Configuration D. Maintenance ```

A. Call Control

``` An engineer needs to configure a mobile device that registers with Cisco Unified Communications Manager to utilize voice and video services. The device is Android-based. The username in Cisco Unified Communications Manager is "rsmith." What is the proper device name for the engineer to configure? A. ANDRSMITH B. ANDSMITHR C. BTDRSMITH D. BOTRSMITH E. UCMRSMTH ```

D. BOTRSMITH

``` For Cisco TelePresence endpoints with TC7.0 software, configuration backup and restore appears where? A. Call Control tab B. Configuration tab C. Diagnostics tab D. Maintenance tab E. Home tab ```

D. Maintenance tab

``` Under which tab can the registration status for the endpoint be found? A. Diagnostics B. Configuration C. Call Control D. Maintenance ```

A. Diagnostics

``` Which component of the Cisco Digital Media Suite is responsible for transcoding and transrating? A. Cisco DMD B. Cisco TMS C. Cisco MXE D. Cisco DMM ```

C. Cisco MXE

A customer requires scheduled Cisco TelePresence video conferencing and the capability for ad hoc conferencing. Which product would be recommended for the customer? A. Cisco TMS and an MCU with port capacity that can fulfill both needs B. Cisco TMS with an MCU and Cisco Unified CM with an MCU C. Cisco TMS with two MCUs D. Cisco Unified CM with two MCUs E. Cisco Conductor with an MCU F. Cisco Conductor integrated with Cisco TMS and an MCU

B. Cisco TMS with an MCU and Cisco Unified CM with an MCU

``` Which desktop endpoint support 802.3af PoE? A. DX70 B. DX80 C. DX90 D. DX650 ```

D. DX650

``` Configuration Warning Expected default link between the Default Subzone and the Default Zone is missing. Which CLI command should be run to resolve these alarms on a Cisco VCS? A. xcommand DefaultValuesSet B. xconfiguration DefaultLinksAdd C. xcommand DefaultLinksAdd D. xconfiguration DefaultValuesSet ```

C. xcommand DefaultLinksAdd

``` Which kind of profile is shown? A. TC WebAdmin H.323 Profile B. TC WebAdmin SIP Profile C. TX WebAdmin SIP Profile D. TC WebAdmin Conference Profile ```

B. TC WebAdmin SIP Profile

The Cisco Telepresence Codec C90 is unable to call the Cisco IP Video Phone. Assuming that the calling search space has been configured correctly, which of these can cause this issue? A. The Cisco Telepresence Codec C90 can only be registered to a Cisco Telepresence Video Communication Server. B. A multipoint control unit is required in order for the call to work. C. The Cisco Telepresence Codec C90 can only be registered as a SIP endpoint to Cisco Unified Communications Manager. H.323 is not supported. D. URI dialing has not been configured on Cisco Unified Communications Manager. E. The Cisco Telepresence Codec C90 Profile 1 > CallSetupMode must be configured as a gateway since Cisco Unified Communications Manager does not have a gatekeeper functionality. F. The Cisco Telepresence Codec C90 is not registered as a SIP endpoint on Cisco Unified Communications Manager. The Cisco Telepresence Codec C90 needs to be registered as both SIP and H.323.

E. The Cisco Telepresence Codec C90 Profile 1 > CallSetupMode must be configured as a gateway since Cisco Unified Communications Manager does not have a gatekeeper functionality.

In which two locations can you find registration information for a video endpoint? (Choose two.) A. from the endpoint touch panel on the Settings > System Information screen B. from the endpoint web interface on the Home screen C. from the Cisco VCS in the Status > System screen D. from the Cisco TMS on the Systems > Provisioning screen

A. from the endpoint touch panel on the Settings > System Information screen B. from the endpoint web interface on the Home screen

A customer is unable to receive calls on the EX90 endpoint, but can make outbound calls. The endpoint uses CUCM for call control and registration. If the engineer only has remote access to the EX90 and CUCM, what are the next two troubleshooting steps? (Choose two.) A. Check CUCM to see if the extension is in a reachable partition. B. Check CUCM to see if the endpoint has the correct Device Calling Search Space C. Check CUCM to see if the endpoint is registered D. Check the EX90 System Status E. Check EX90 DND Status via WebAdmin

C. Check CUCM to see if the endpoint is registered | D. Check the EX90 System Status

``` Components of Digital Media Suite for created playlists: A. DMM B. TMS C. DMD D. MXE ```

A. DMM

Which three of these are functions of the Cisco TelePresence Management Suite? (Choose three.) A. automatic software update and release keys B. intelligent call routing engine C. provisioning a Cisco TelePresence System endpoint D. tracing SIP and H.323 calls E. managing phonebooks for endpoints that are registered to the Cisco Unified Cisco Unified Communications Manager F. rebooting endpoints that are registered to the Cisco TelePresence Video Communications Server

A. automatic software update and release keys B. intelligent call routing engine F. rebooting endpoints that are registered to the Cisco TelePresence Video Communications Server

``` Which two Cisco TelePresence endpoints support hosting embedded multisite conferences? (Choose two.) A. sx20 B. MX800 C. DX70 D. DX80 E. Jabber Video for Cisco TelePresence ```

A. sx20 B. MX800 For reference, the below endpoints support Multisite: MX200/300 G2 MX700/800 SX20/80

A network administrator is asked to configure a video conference using the Cisco TelePresence MCU 5300. There is a requirement for participants to start with the same layout when joining the conference. How can this goal be accomplished? A. Layouts cannot be customized on the MCU 5300. B. Configure a custom layout for each user individually. C. Configure a custom layout and apply the layout to all new participants. D. Allow each endpoint to configure its own layout.

C. Configure a custom layout and apply the layout to all new participants.

``` A network engineer is installing a Cisco TelePresence MX200 with two microphones in a conference room. How far from each other do the microphones need to be installed? A. 1 m B. 2 m C. 3 m D. 4 m ```

B. 2 m

``` ECDS is a solution that provides which of the following benefits? A. Video on demand capabilities B. Audio conference resources C. Content distribution management D. WAN optimization ```

C. Content distribution management

``` Which of these devices supports POE 802.1af? A. Cisco 7975 B. Cisco 7960 C. Cisco 7945 D. Cisco 7940 ```

A. Cisco 7975

A network administrator is manually configuring a Cisco TelePresence MX300 endpoint. Which two pieces of information must the administrator introduce, in order for the system to properly register to a Cisco Unified Communications Manager or to a Cisco TelePresence Video Communications Server? (Choose two.) A. the MAC address of the Cisco TelePresence MX300 endpoint B. a SIP URI C. the name of the Cisco Unified Communications Manager server or Cisco VCS server D. an IP address for the endpoint

A. the MAC address of the Cisco TelePresence MX300 endpoint | B. a SIP URI

``` An engineer is receiving several Cisco TMS email alerts for system phonebooks that are not updating. Which menu path should the engineer use to suppress these Cisco TMS email alerts? A. TMS > Clear this ticket B. TMS > SMTP settings C. TMS > Manage ticket error levels D. TMS > Ticket management E. TMS > Email notification settings ```

C. TMS > Manage ticket error levels

``` Cisco inline power was replaced by which IEEE standard? A. 802.3at B. 802.3af C. 802.11n D. 802.11ac ```

B. 802.3af

An engineer is deploying a Cisco TelePresence Touch 8 controller for a Cisco TelePresence SX20. Which two steps are required as part of this process? (Choose two.) A. Connect the cable from the Touch 8 controller to the Cisco TelePresence SX20. B. Connect the Touch 8 controller to the power adapter and connect the adapter to the network. C. Connect the Touch 8 controller to the secondary network adapter on the Cisco TelePresence SX20. D. Reboot the Cisco TelePresence SX20. E. Hold the mute button down for 20 seconds while you power on the Touch 8 controller.

C. Connect the Touch 8 controller to the secondary network adapter on the Cisco TelePresence SX20. E. Hold the mute button down for 20 seconds while you power on the Touch 8 controller.

Which of these needs to be enabled in Cisco Unified Communications Manager in order for the Cisco TelePresence System 500-32 to be able to share a presentation with a Cisco TelePresence System Codec C40 endpoint that is registered to a VCS? A. Allow iX application media B. Send send-receive SDP in mid-call invite C. Allow presentation sharing using BFCP D. Allow presentation sharing using H.235 E. Deliver conference bridge identifier

C. Allow presentation sharing using BFCP

``` A desktop video endpoint is needed that can support a PrecisionHD camera design and a built-in display, and is Bluetooth-ready and multisite-capable. Which desktop endpoint supports all of these requirements? A. SX20 B. EX60 C. SX80 D. EX90 ```

D. EX90

You have been informed from the field that a new Cisco TelePresence video endpoint has been deployed with an IPv4 address of 172.28.254.45. You need to check for connectivity from the Cisco Unified Communications Manager server. Which command should be entered to check for network connectivity? A. utils network traceroute newsystem.domain254.local B. utils network ping 172.28.254.45 C. ping 172.28.254.45 D. traceroute 172.28.255.255 utils network host cucm.osl147.local

B. utils network ping 172.28.254.45

Which command returns the Cisco VCS to its factory default settings? A. write erase B. factory-default C. xCommand SystemUnit FactoryReset Confirm: Yes D. utils SystemUnit FactoryReset Confim: Yes E. factory-reset

E. factory-reset

What is the proper procedure to manually reset a password on a Cisco TelePresence EX Series endpoint running software version TC7? A. Use SSH to access the device and use the username "cisco" and the password "TANDBERG." B. Hold down the mute key on the touch display for 25 seconds and reset the password using the touch screen. C. When the device is powered down, hold down the power button until the power light blinks twice, then press the power button twice. D. Tap the power button four times within ten seconds and then use Telnet to connect to the device IP address. E. Tap the power button five times while the device is powered off and when it boots, use Telnet to connect to the device within 60 seconds.

C. When the device is powered down, hold down the power button until the power light blinks twice, then press the power button twice.

``` Which option is an immersive endpoint? A. Cisco TelePresence EX90 B. Cisco TelePresence TX9000 C. Cisco TelePresence SX10 D. Cisco TelePresence DX70 ```

C. Cisco TelePresence SX10

Which three features does a Cisco TelePresence Content Server provide that a Cisco MCU cannot? (Choose three.) A. conference bridge virtualization support B. multiple conference layouts C. resource optimization via conductor D. 720p resolution at 60 fps E. 1080p resolution at 60 fps F. multiscreen immersive room endpoint support

A. conference bridge virtualization support C. resource optimization via conductor F. multiscreen immersive room endpoint support

``` A user is currently on a Cisco TelePresence call using a Touch 8 device and would like to change the local screen layout so that the active speaker is in full screen and the other participants are smaller within the picture. Which layout option should the user choose? A. Prominent B. Overlay C. PiP D. FullScreen ```

B. Overlay

``` Which CLI command can be used to reset the Cisco TelePresence System 500-32 personal video system to a factory condition? A. utils factory reset 2 B. utils system factory init C. xcommand defaultvalues set level: 2 D. xconfiguration default factory E. utils reset factory F. xcommand SystemUnit FactoryReset ```

B. utils system factory init

How can you see ongoing call statistic on endpoint? A. Status Call Feature Display B. xStatus OutgoingVideoChannel Netstat 1 C. xStatus Diagnostic D. xCommand Diagnose

C. xStatus Diagnostic

``` An engineer is selecting a digital media player and must ensure that there are Ethernet downlink ports. Which model has these ports? A. 4310 DMP B. Edge 340 DMP C. Edge 300 DMP D. 4400 DMP ```

C. Edge 300 DMP

``` To which Ethernet port on a Cisco TelePresence System (500/1x00/1300/3xx0) endpoint would a technician need to connect to manually assign a static IP address for first-time setup? A. IP phone port B. network port C.camera port D. auxiliary network port ```

D. auxiliary network port

Exhibit: Jabber has a red X on Computer Bottom Right. Which two of these can cause the phone status error icon that is shown in the exhibit? (Choose two.) A. The Cisco Unified Communications Manager IM and Presence Service is not available. B. The username and password in Cisco Jabber phone services are misconfigured. C. The Cisco Jabber initial audio and video settings need to be set. D. There is no DN configured for the Cisco Unified Client Services Framework in Cisco Unified Communications Manager. E. The Cisco Jabber does not have the correct phone button template and hence cannot register to the Cisco Unified Communications Manager. F. The called user presence status is unknown.

B. The username and password in Cisco Jabber phone services are misconfigured. D. There is no DN configured for the Cisco Unified Client Services Framework in Cisco Unified Communications Manager.

A Cisco TelePresence System 1300 Series endpoint is in the process of booting and the engineer notices a red "X" on the screen for Step 6 in the boot process. What does this red "X" indicate? A. The endpoint failed to load its firmware. B. There is an error with compact flash. C. The endpoint could not obtain an IP address via DHCP. D. The touch panel is malfunctioning.

B. There is an error with compact flash.

How to monitor events and alarms generated on CUCM? A. use a syslog server B. configure and use a syslog server C. use the CUCM RMT D. use a Cisco Prime Collaboration Provisioning

B. configure and use a syslog server

A customer wants to purchase a video endpoint that supports a touchscreen control. The engineer recommends a Cisco TelePresence MX300 endpoint. Which information about this endpoint should the engineer tell the customer? A. The endpoint comes with the 8-inch touchscreen by default. You can purchase the 10-inch touchscreen with an additional cost. B. The endpoint comes with the 8-inch touchscreen by default. You do not have the option to purchase the 10-inch touchscreen. C. You can purchase the endpoint with either the 8-inch touchscreen or the 10-inch touchscreen. You need an additional option key for the 10-inch touchscreen. D. The endpoint comes with the 10-inch touchscreen by default. You do not have the option to purchase the endpoint with the 8-inch touchscreen.

D. The endpoint comes with the 10-inch touchscreen by default. You do not have the option to purchase the endpoint with the 8-inch touchscreen.

``` An engineer is deploying a Cisco TelePresence Content Server. Which two services are provided by this product? (Choose two.) A. video storage B. multiconferencing C. scheduler D. video conferencing E. video recording F. video overlay ```

A. video storage | E. video recording

An engineer is configuring Cisco TCS to record video conferences. The customer’s requirement is to configure 30 recording aliases and to enable automatic creation of future aliases. Which two configurations are required for this solution? (Choose two.) A. SIP registration between Cisco TCS and Cisco VCS B. configuring recording alias settings to copy on Cisco TCS C. custom system call configuration on Cisco TCS D. SIP registration between Cisco TCS and Cisco TelePresence MCU E. H.323 registration between Cisco TCS and Cisco VCS

C. custom system call configuration on Cisco TCS | E. H.323 registration between Cisco TCS and Cisco VCS

An engineer encounters video quality issues with an endpoint. To capture ongoing call statistics from the CLI, which command should the engineer use? A. xStatus Call Feature Display B. xStatus OutgoingVideoChannel Netstat 1 C. xStatus Diagnostics D. xCommand Diagnose

C. xStatus Diagnostics

``` The features that Telepresence Server has and MCU don't have: (Choose three.) A. Video Compositing B. auto-attendant conference menu C. active presence D. multiscreen endpoint support E. multiple layouts F. automatic lecture mode G. virtualization ```

C. active presence D. multiscreen endpoint support G. virtualization

``` A video engineer wants to see the event logs of a Cisco VCS appliance. Under which menu item in the VCS web interface are the event logs located? A. Maintenance B. Configuration C. System D. Status ```

A. Maintenance

Cisco Video Surveillance Video Encoder cards perform which function? A. the ability to use existing analog equipment with an IP-enabled video surveillance system B. the ability to convert low-resolution video to high-definition video for video surveillance C. the ability to stream digital media to digital media in an IP-enabled video recording environment D. the ability to encrypt raw video signals to secure video signals

A. the ability to use existing analog equipment with an IP-enabled video surveillance system

``` On a Cisco C-Series codec, where would a technician go to configure the wallpaper? A. Configuration > User Administration B. Configuration > Personalization C. Configuration > Peripherals D. Configuration > System Configuration ```

B. Configuration > Personalization

``` Which protocol is used to monitor active voice call quality? A. RTCP B. RTP C. QoS D. STP E. SDP ```

A. RTCP

``` Which two methods are used to navigate the menu options of an auto attendant on an MCU? (Choose two.) A. KPML B. DTMF C. PiP D. PoP E. FECC F. SCCP ```

B. DTMF | E. FECC

``` A network engineer wants to check the local system call ID on a Cisco TelePresence Immersive System. Which CLI command should the engineer use? A. show call statistics addin B. show call statistics all C. show call statistics audio D. show call status E. show call statistics video ```

D. show call status

``` Which three products are compatible with Digital Media Manager? (Choose three.) A. Media Delivery Engine B. Interactive Experience Client C. Show and Share D. Cast E. Digital Signs F. Stadium Vision Director ```

C. Show and Share D. Cast E. Digital Signs

A customer owns three Codian 5300 MCUs with several video endpoints. Users complain that they are getting multipoint control unit port capacity errors when scheduling video conferences in Cisco TMS. What can be done to correct these errors automatically? A. Enable the Automatic MCU Cascading option in the Cisco TMS Conference Settings. B. Install a Cascading option key on the Cisco TMS server. C. Install a Cisco TelePresence Conductor server. D. Install cascaded multipoint control units.

C. Install a Cisco TelePresence Conductor server.

An engineer must pull logs from an Cisco EX90 Codec for a Call setup issue. The engineer opens a Telnet session to the codec and enters the log ctx SipPacket debug 9 command. The engineer places a test call, but sees no debugs on the console. Which action must the engineer take to review the logs? A. SSH into the codec to view the logs B. Enter the log ctx SipPacket debug all command C. Enter the log output on command. D. Collect logs from the web interface.

C. Enter the log output on command.

A Cisco SX20 is registered to Cisco Unified Communications Manager. It cannot place calls. It is configured with SIP URI 1007 and when traces are run, SIP Forbidden and Unknown calling DN errors are found. Which statement describes the problem? A. The wrong network IP address is assigned to device. B. The ACL is blocking port 5060 from device. C. H.323 is not configured correctly. D. SIP URI does not contain IP address or hostname.

D. SIP URI does not contain IP address or hostname.

Exhibits Provided. The C-Series endpoint (codec) does not register with the Video Communication Server that is located in a different network. Based on the exhibits, what could be causing the issue? A. The subnet mask on the codec is incorrect. B. The ip address of the codec is incorrect. C. The interface that the codec is in is in the wrong VLAN. D. The codec did not receive a DHCP address from the DHCP server.

A. The subnet mask on the codec is incorrect.

``` A customer wants to record Cisco TelePresence conferences with the ability to alter the video format and add captions. Which two products are recommended to accomplish this goal? (Choose two.) A. Show and Share B. Digital Media Manager C. Interactive Experience Manager D. Media Experience Engine E. TelePresence Content Server ```

D. Media Experience Engine | E. TelePresence Content Server

c=IN IP4 192.168.1.5 m=video 50008 RTP/AVP 126 ``` In the SDP that is displayed, to which IP address and port should the receiving end send its content video channel media? A. 192.168.1.4:2048 B. 192.168.1.4:50000 C. 192.168.1.5:50002 D. 192.168.1.5:50008 ```

D. 192.168.1.5:50008

``` Which option is the Cisco recommended minimum viewing distance for a 52" monitor installed in a video conferencing room? A. 1.5 m B. 3.0 m C. 2.5 m D. 2.0 m ```

A. 1.5 m

Which two of these are considered to be provisioning and scheduling management tools in a Cisco TelePresence environment? (Choose two.) A. Cisco TelePresence Manager B. Cisco Video Surveillance Operations Manager C. Cisco TelePresence Management Suite D. Cisco TelePresence Multipoint Control Unit E. Cisco Video Surveillance Management Server

A. Cisco TelePresence Manager | C. Cisco TelePresence Management Suite

``` You have installed a C-Series endpoint in an office where DHCP is not supported. At a minimum, which four network items must be configured for the endpoint to be able to register with H.323 on a Cisco TelePresence Video Communication Server located at the external headquarters location? (Choose four.) A. unique IPv4 address B. subnet mask C. default gateway D. Cisco VCS IPv4 address E. Active Directory IPv4 address F. SMTP server IPv4 address ```

A. unique IPv4 address B. subnet mask C. default gateway D. Cisco VCS IPv4 address

``` Which endpoint use for multiparty with presentation capability and without centralized bridge? A. Jabber B. SX20 C. 7800 D. DX650 ```

B. SX20

Which option performs a factory reset of a Cisco TelePresence System endpoint? A. Configuration > System Settings B. Configuration > Security Settings C. Troubleshooting > Hardware setup D. Monitoring E. Troubleshooting > Configuration Issues F. Troubleshooting > System Restart G. A Cisco TelePresence System endpoint can be reset only via CLI.

E. Troubleshooting > Configuration Issues

The command xCommand Security FIPSMode Activate is issued to a Cisco TelePresence C-Series codec. Management wants to reverse the effects of this command. Which two methods could be used for this purpose? (Choose two.) A. From the touch screen, disable FIPS mode in the Administrator Settings menu. B. From the touch screen, perform a factory reset from the Administrator Settings menu. C. From the touch screen, disable all security settings from the Administrator Settings menu. D. Use SSH to connect to the system and enter the xCommand Security FIPSMode Deactivate command. E. Use Telnet to connect to the system and enter the xCommand SystemUnit FactoryReset Init command. F. Use SSH to connect to the system and enter the xCommand SystemUnit FactoryReset Confirm: Yes command.

B. From the touch screen, perform a factory reset from the Administrator Settings menu. F. Use SSH to connect to the system and enter the xCommand SystemUnit FactoryReset Confirm: Yes command.

``` A video engineer needs to locate the running version of the Cisco VCS. Which tab contains this information? A. System B. Applications C. Configuration D. Status ```

A. System

``` Refer to the exhibit. When a user cannot log into the Cisco Jabber client, the log file from a Windows Jabber client on an internal network is shown. Which SRV must the DNS administrator create to resolve the problem? A. _collab-edge B. _cisco-uds C. _sip D. _sips ```

A. _collab-edge

``` Which means this command: set audio aec enable? A. aec codec enabled B. echo cancellation C. noise cancellation D. call economy bandwidth enable ```

B. echo cancellation

Which two of these are required in order to complete the password recovery of a Cisco TelePresence System endpoint? (Choose two.) A. must have FTP enabled on the endpoint B. must have SSH enabled on the endpoint C. must have the security question answer for the endpoint D. must be in the same room as the main display E. must have SFTP enabled on the endpoint F. must call Cisco TAC for the security code

B. must have SSH enabled on the endpoint | D. must be in the same room as the main display

Video conference bridges accomplish their conferencing functionality by doing media transcoding or media switching. What are the three main advantages of media switching? (Choose three.) A. extremely low latency B. endpoints that can customize layouts C. the ability to upscale low-resolution video D. lower cost per port E. typically higher port capacity F. the ability for endpoints to connect at different bandwidth speeds and resolutions

A. extremely low latency D. lower cost per port E. typically higher port capacity

Which two methods can be used to set the default call protocol of a Cisco TelePresence endpoint running TelePresence codec firmware? (Choose two.) A. Use the GUI and set System > H.323 > Settings > Default Call Protocol > H.323. B. Use the CLI command xConfiguration Conference 1 DefaultCall Protocol: H323. C. Use the CLI command Conference Default Protocol: H323. D. Use the CLI command Default Protocol: H323. E. Use the GUI and set Configuration > System Configuration > Conference > DefaultCall > H.323.

B. Use the CLI command xConfiguration Conference 1 DefaultCall Protocol: H323. E. Use the GUI and set Configuration > System Configuration > Conference > DefaultCall > H.323.

Which Cisco Video Surveillance product contains the Cisco Video Surveillance Encoding Server? A. Video Communications Server B. Cisco Video Surveillance Operations Manager C. Cisco Video Surveillance Media Server D. Cisco Video Surveillance Transcoding and Encoding Server E. Cisco Video Surveillance Virtual Matrix

B. Cisco Video Surveillance Operations Manager

``` A video engineer with ID12345678 wants to provide Cisco Jabber for remote users without VPN connectivity. Which Cisco product must be implemented to achieve this goal? A. Cisco Expressway B. Cisco VCS C. Cisco Unified CM D. Cisco TMS ```

A. Cisco Expressway

The customer recently connected a new TV monitor to the Cisco TelePresence endpoint. This device is now showing a warning concerning the echo cancellation delay. Which action could help mitigate this issue? A. Turn off any postprocessing settings. B. Turn off 3D mode on the new TV. C. Turn on Frequency Scan Acceleration for the new TV. D. Turn off surround sound on the new TV.

A. Turn off any postprocessing settings.

``` Cisco TelePresence Immersive Endpoint devices support a feature that allows objects, documents, or PC applications to be presented in a plug-and-play fashion. What is this feature called? A. Cisco TelePresence Content Sharing B. Cisco TelePresence Auto Collaborate C. Cisco TelePresence Multichannel D. Cisco TelePresence Content Stream ```

B. Cisco TelePresence Auto Collaborate

An engineer wants to manually assign the IP address on an Cisco TelePresence System EX Series endpoint by using the CLI. Which command should the engineer use? A. xCommand Set Network IPV4 Address B. xConflguration Network IPV4 Address Ethernet0: C. xConflguration Network IPV4 Address NIC0: D. xConfiguration Network IPV4 Address:

D. xConfiguration Network IPV4 Address:

A conference has been scheduled two hours in advance. When does Cisco TelePresence Management Suite run diagnostics for system tickets that can affect the conference setup? A. 15 minutes prior to the scheduled start time B. 1 minute prior to the scheduled start time C. 10 minutes prior to the scheduled start time D. 5 minutes prior to the scheduled start time

A. 15 minutes prior to the scheduled start time

You connect the camera cable to A. codec B. monitor C. network

C. network

``` Which option is the Cisco recommended layout if cascading is being used? A. Enhanced Continuous Presence B. Full Participant C. Continuous Presence D. Active Speaker ```

C. Continuous Presence

``` Which two features are present in the Cisco TelePresence TX9000 model? (Choose two.) A. 1080p 60fps content-sharing stream B. integrated CTMS C. integrated document camera D. six-participant seating E. free-standing light reflector ```

D. six-participant seating | E. free-standing light reflector

``` Conference solution for video streaming: (Choose two) A. TCS B. VCS C. TMS D. TS E. MCU 4500 ```

A. TCS | E. MCU 4500

Search (453) State:Completed Found: False Reason: Forbidden Info: Policy Response A technician is reviewing the search history details on a Cisco TelePresence VCS for a recent call that failed. What was the cause for the call setup failure? A. A local call policy rule denied the call. B. The source alias matched an entry in the registration deny list. C. The originating caller was not authenticated. D. The source alias origin is unknown.

A. A local call policy rule denied the call.

``` A call with a destination alias of 15551001234 reaches a Cisco TelePresence VCS. Which transform will the destination alias match? A. Transform 1 - 155100[1234] B. Transform 2 - ([^@]*) C. Transform 3 - 155100 D. Transform 4 - 15551001234 ```

B. Transform 2 - ([^@]*)

An engineer is using a cascading feature with Cisco TelePresence Conductor and Cisco TelePresence Servers. Which two limitations will the engineer likely encounter? (Choose two.) A. Ad-hoc conferencing cascading is not supported. B. Only single-screen endpoints are supported through cascading links. C. Multiple-screen endpoints are supported only with three or more Cisco TelePresence Servers. D. Scheduled conferencing is not supported. E. Ad-hoc conferencing cascading is supported only with three or more Cisco TelePresence Servers.

A. Ad-hoc conferencing cascading is not supported. | D. Scheduled conferencing is not supported.

``` A network engineer is setting up a Cisco TelePresence Content Server. The customer requires live streaming, but does not have a streaming server. Which media should be configured to stream locally from the TelePresence Content Server? A. QuickTime B. MPEG-4 C. Flash D. Windows Media E. Darwin ```

D. Windows Media

Which two methods can be used to retrieve the status of a Cisco TelePresence codec endpoint? (Choose two.) A. From the codec web GUI, choose Troubleshooting > System Status. B. From the codec web GUI, choose Diagnostics > System Status. C. From the codec web GUI, choose Configuration > System Status. D. Run the xstatus command from the CLI. E. Run the xcommand status command from the CLI.

C. From the codec web GUI, choose Configuration > System Status. D. Run the xstatus command from the CLI.

``` Which codec represents video that is supported by Cisco TelePresence endpoints? A. H.263 B. H.323 C. H.264 D. H.262 ```

C. H.264

Which action ensures prioritization of voice over data traffic? A. voice and data VLAN on different subnets with QoS classification B. voice and data VLAN on same subnets without QoS classification C. signaling and media traffic marked with Layer 2 CoS and Layer 3 DSCP mappings D. signaling and media traffic marked with Layer 2 DSCP and Layer 3 CoS mappings

C. signaling and media traffic marked with Layer 2 CoS and Layer 3 DSCP mappings

Which statement is correct regarding the difference between Multisite and Multiway conferencing? A. Multisite requires configuration on the endpoint, whereas Multiway requires the Multiway options key to be installed. B. Multisite requires the presence of a multipoint control unit, whereas Multiway relies on the endpoint conferencing capability. C. Multisite is used to conference in multiple sites, whereas Multiway is intrasite multipoint conferencing. D. Multisite requires the Multisite options key to be installed and configured at the endpoint, whereas Multiway requires a Cisco TelePresence Video Communications Server and a centralized multipoint control unit.

D. Multisite requires the Multisite options key to be installed and configured at the endpoint, whereas Multiway requires a Cisco TelePresence Video Communications Server and a centralized multipoint control unit.

The user of a Cisco TelePresence MX300 wants to control the far-end camera of any video conference participant. Which control device and function is used to control the far-end camera? A. Navigate using the TRC5 Remote Control arrow keys. A company would like to add additional multipoint features to their video infrastructure. Which feature is the B. Tap on the image of one of the participants using touch control. C. Use the Touch Control Conference functions. D. Use the TRC5 Remote Control home key.

B. Tap on the image of one of the participants using touch control.

What can be deduced from the log shown in the exhibit, which was taken from a Cisco TelePresence Codec C60? A. A direct call to 52902511 is being made. B. A Multiway call to multiway221@osl147.local is being made. C. No calls are being attempted by the endpoint. D. A BFCP call is being initiated. E. The endpoint is receiving a call from the VCS.

B. A Multiway call to multiway221@osl147.local is being made

How does a Cisco TCS process incoming video calls? A. Recording Alias > Template > Media Server Configuration B. Recording Alias > Media Server Configuration > Template C. Recording Alias > Media Server Configuration > H.323 > Template D. Recording Alias > Workflow > Template > Media Server Configuration

A. Recording Alias > Template > Media Server Configuration

``` Jabber fail login with logs. What DNS SRV record need to resolve this issue? A. _SIP B. _SIPS C. _EDGE D. _cisco-uds ```

D. _cisco-uds Provides the location of Cisco Unified Communications Manager version 9 and higher.

``` Which of these involves combining visual elements from separate sources into a single image? A. interlacing B. compositing C. video conferencing D. interleaving ```

B. compositing

``` When you are on a call that is hosted on a Cisco TelePresence MCU, which function is enabled when you enter the numeric sequence *6? A. request the floor B. mute/unmute audio C. merge another call D. cycle layout options ```

B. mute/unmute audio

``` Which Cisco DMS component is used for content recording? A. Cisco Cast B. Cisco TCS C. Cisco DMM D. Cisco DMP ```

B. Cisco TCS

A company would like to add additional multipoint features to their video infrastructure. Which feature is the video administrator attempting to configure in this exhibit? A. multisite feature to allow third-party multipoint conferences B. multipoint scheduled conferences using conference factory C. multiway feature to allow on-demand conferences D. multisite feature to allow scheduled conferences

C. multiway feature to allow on-demand conferences

A technician enters the diag system normal command for a Cisco TelePresence System endpoint. Which action must be done in the CLI before entering this command? A. Logging must be enabled. B. Calling services must be stopped. C. All forced upgrades must be cleared. D. The Telephone_Srvr service must be restarted.

B. Calling services must be stopped.

Which two additional items can be configured for an endpoint to register with the Cisco TelePresence Video Communication Server for H.323 to function correctly? (Choose two.) A. unique system ID B. unique H.323 ID C. unique DNS entry ID D. unique E.164 alias E. unique real-time transport protocol port numbers F. unique NTP server IPv4 address

B. unique H.323 ID | D. unique E.164 alias

Which two additional items must be configured for an endpoint to register manually with the Cisco TelePresence Video Communication Server for the SIP to function correctly? (Choose two.) A. E.164 alias B. H.323 ID C. SIP uniform resource indicator D. configured SIP registrar and proxy server E. NTP server IPv4 address F. unique system ID

C. SIP uniform resource indicator | D. configured SIP registrar and proxy server

A new Cisco TelePresence MCU 5300 is being installed. The customer requested a static IP address to be configured on this device. Which two methods address this request? (Choose two.) A. From the MCU console, issue the command set static ip-address netmask default-gateway. B. From the MCU console, issue the command xconfigure interface:1 static ip-address netmask. C. From the MCU console, issue the command static A ip-address netmask default-gateway. D. From the web interface, use the Network > Port A menu options. E. From the web interface, use the Settings > Interface menu options.

C. From the MCU console, issue the command static A ip-address netmask default-gateway. D. From the web interface, use the Network > Port A menu options.

``` When scheduling a multipoint conference, which three devices are required for the conference to be scheduled and completed successfully? (Choose three.) A. Cisco Unified Communications Manager B. multipoint control unit C. video conferencing endpoints D. Cisco Unity Connection E. Cisco Unified IM and Presence ```

A. Cisco Unified Communications Manager B. multipoint control unit C. video conferencing endpoints

An engineer sees a video camera icon on the Cisco IP phone screen status line. Which meaning of this icon is true? A. The Cisco VT camera is connected to the PC, and the PC is connected to the Cisco IP phone. B. The Cisco IP phone has web access. C. The Cisco IP phone is receiving a video call. D. The Cisco IP phone is configured with video capabilities.

D. The Cisco IP phone is configured with video capabilities.

``` What CLI command will enable access to the presentation device in the system? A. utils system presentation B. set system presentation C. set presentation system D. utils present enable ```

A. utils system presentation

Which three items should be considered when restoring a backup to a Cisco VCS Expressway? (Choose three.) A. A restart is required to complete the system restore process. B. If the backup file is encrypted, an encryption password will be needed. C. A valid backup configuration file must be accessible. D. A function SFTP server is needed for remote restore. E. The VCS expressway must be put into maintenance mode during the upgrade. F. A flash drive that is connected to the appliance can be used to restore the configuration. G. Cisco TMSXE can be used to process and restore backups.

A. A restart is required to complete the system restore process. B. If the backup file is encrypted, an encryption password will be needed. C. A valid backup configuration file must be accessible.

``` An engineer is deploying Cisco Digital Media Players throughout the enterprise to provide digital signs. Which three Cisco Digital Media Players can the engineer use? (Choose three.) A. Cisco Edge 340 Digital Media Player B. Cisco Edge 350 Digital Media Player C. Cisco Digital Media Player 4305 D. Cisco Digital Media Player 4310G E. Cisco Digital Media Player 4400G F. Cisco Digital Media Player 4500 ```

A. Cisco Edge 340 Digital Media Player D. Cisco Digital Media Player 4310G E. Cisco Digital Media Player 4400G

An engineer is consistently seeing tickets in the Cisco TMS that are generated when a video endpoint is powered off each day. Which menu path allows the engineer to prevent this type of ticket from being created? A. TMS > Clear this ticket B. TMS > Acknowledge ticket C. TMS > Ignore ticket type for this system D. TMS > Ticket management E. TMS > Manage ticket error levels

C. TMS > Ignore ticket type for this system

``` An engineer is configuring a Cisco TelePresence MX300 for registration to a Cisco Unified Communications Manager system. What should Network1>DHCP RequestTFTPServerAddress be set to on the endpoint, in order to receive option 150? A. DHCP B. 150 C. On D. TFTP ```

D. TFTP

Which option describes how to configure SNMP settings on a CTS/TX endpoint? A. can be configured only via codec CLI B. can be configured only via codec GUI C. can be configured only in a device profile in Cisco Unified Communications Manager D. can be configured either via codec GUI or codec CLI E. can be configured in codec GUI, codec CLI, or device profile in Cisco Unified Communications Manager

C. can be configured only in a device profile in Cisco Unified Communications Manager

An employee is reviewing the logs from a Cisco TelePresence System unit due to reports of calls being dropped. Which log entry explains the reason for the call failure? A. INFO Packet loss detected: 100% loss - no media stream received in the last 10 seconds B. INFO Jitter buffers increased C. INFO admin CLI login from 10.160.134.15:51151 D. INFO Main Video stream packet loss detected on the center codec

A. INFO Packet loss detected: 100% loss - no media stream received in the last 10 seconds

``` Refer to the exhibit. An engineer is configuring a Cisco TelePresence Conductor with Cisco TelePresence Server version 4.0. The engineer wants to enable segment switching, to allow multiscreen endpoints to show only the screen that contains the loudest speaker of another multiscreen system. Which menu option should the engineer use to enable this feature? A. Service Preferences B. Conference Templates C. Locations D. Conference Bridges ```

A. Service Preferences

``` In which section of the user template is CoS configured in Cisco Unity Connection? A. Location B. Name C. Phone D. System ```

C. Phone

An engineer is configuring the brightness on a Cisco SX10 endpoint with default configuration via the CLI with the xConfiguration Cameras Camera 1 Brightness Level: 1 command but notices no changes to the local display brightness level. Which option is the reason for this issue? A. The codec must be rebooted for the changes to take effect. B. The display brightness was changed from the remote end. C. The default brightness level is 1. D. The brightness mode must be set to manual.

A. The codec must be rebooted for the changes to take effect.

``` Which video input port is available on a Cisco DX80? A. DVI-D B. DVI-A C. VGA D. HDMI ```

D. HDMI

An engineer is configuring VIP mode for a Cisco TelePresence Multipoint Switch. What are three characteristics the engineer must keep in mind? (Choose three.) A. VIP mode can be configured only when the meeting is not active. B. The VIP is displayed on the center screen for three screen systems. C. Network multipoint meetings are supported. D. VIP mode timers must be configured from the CLI. E. Locking is not supported. F. Only one VIP can be configured for each meeting.

B. The VIP is displayed on the center screen for three screen systems. D. VIP mode timers must be configured from the CLI. F. Only one VIP can be configured for each meeting.

While trying to register to Cisco UCM, a Cisco IP phone reports TFTP authorization failure. Which cause of this issue is true? A. The phone has a cabling issue. B. A firewall in the network is blocking access. C. The TFTP address for the phone is not in the CTL file. D. DHCP option 150 has the incorrect TFTP IP address configured.

D. DHCP option 150 has the incorrect TFTP IP address configured.

An engineer needs to connect an external display to a Cisco TelePresence MX700 endpoint. What must the engineer do to access the external monitor output connector? A. Remove the cover under the main monitor. The cover is fastened with two screws. B. Remove the cover on the back of the system. The cover is fastened with magnets. C. Remove the cover on the right side of the system. The cover is fastened with four screws. D. Remove the cover on the left side of the system. The cover is fastened with magnets.

D. Remove the cover on the left side of the system. The cover is fastened with magnets.

``` An engineer is troubleshooting call quality issues between two sites. On an active voice call, the call statistics on the IP phone show that the max jitter is 100 ms. Which option is the maximum amount of jitter that the engineer can allow and still expect to maintain a high-quality audio call? A. 5 ms B. 10 ms C. 30 ms D. 50 ms ```

D. 50 ms

``` Which two Cisco TelePresence protocols are supported for content sharing in point-to-point and multipoint meetings? (Choose two.) A. BFCP B. ICE C. Switched Presentation D. Auto Collaboration E. H.323 ```

A. BFCP | D. Auto Collaboration

A customer has a data and VoIP converged network and would like to add video to this network. Which two key QoS elements should be included in the new network design? (Choose two.) A. Configure bandwidth management features to smooth bursty traffic and mitigate end-to-end congestion. B. Assign a high priority to transactional traffic to maintain quality of business traffic. C. Keep video traffic on the low latency queue and move voice traffic to a lower-priority queue. D. Apply bandwidth control features that will guarantee bandwidth for the maximum possible amount of video traffic. E. Assign both video and voice traffic to use the highest-priority queue.

A. Configure bandwidth management features to smooth bursty traffic and mitigate end-to-end congestion. D. Apply bandwidth control features that will guarantee bandwidth for the maximum possible amount of video traffic.

``` An engineer must create a solution for 15 analog cameras. Which module supports this requirement? A. Cisco Analog Video Gateway Module B. Cisco ISR Module C. Cisco Video Management Module D. Cisco Storage System Module ```

A. Cisco Analog Video Gateway Module

``` Which option is the embedded component that enables endpoints and collaboration applications to support medianet functionality? A. Media Services Interface B. Open API C. XMPP D. SNMP E. Medianet Agent F. SDN ```

A. Media Services Interface

``` When you add third party call what button you should press? A. Transfer B. Merge C. Conference D. Swap ```

C. Conference

``` What is the maximum number of servers that a Cisco TelePresence Content Server cluster can have? A. 6 B. 7 C. 8 D. 10 E. 12 ```

D. 10

The microphone on a Cisco TelePresence System 3000 is switching incorrectly to a camera that does not have an active speaker. What is the first step that an engineer should take to troubleshoot this issue? A. Check whether the microphone is properly plugged in. B. Run the microphone calibration procedure. C. Plug all microphones into the primary codec. D. Check whether the cable from the microphone is plugged into the correct receptor on the codec.

B. Run the microphone calibration procedure.

``` How many passwords are utilized for each user in Cisco Unity Connection? A. 0 B. 1 C. 2 D. 3 ```

C. 2

``` Which technology can be used to pair an iPad with a Cisco room-based video collaboration endpoint? A. Bluetooth B. Wi-Fi C. Cisco Intelligent Proximity D. Zigbee ```

C. Cisco Intelligent Proximity

``` An engineer wants to convert analog live video, streaming it across an IP network and displaying it in another location. Which two components are required, at minimum, to provide this functionality? (Choose two.) A. Cisco Media Experience Engine 3500 B. Cisco TelePresence Content Server C. Cisco Digital Media Player D. Cisco Digital Media Manager E. Cisco Digital Media Encoder ```

C. Cisco Digital Media Player | E. Cisco Digital Media Encoder

``` A company wants to enable a mobile user to connect to the corporate network to access calls, messages, video conferencing, and web collaboration. Which product provides these features for the user? A. Cisco WebEx Connect B. Cisco Unified Presence C. Cisco TelePresence SX20 D. Cisco Jabber ```

D. Cisco Jabber

A customer wants to enable existing remote Cisco Jabber users to register their devices to Cisco Unified Communications Manager without using a VPN connection. What should the customer implement in order to achieve this goal? A. Cisco Expressway Series with MRA B. Cisco Unified Communications Manager IM and Presence XMPP Federation C. Cisco VCS with RMA D. Cisco Expressway Series with Jabber Guest E. Cisco VCS with Jabber Guest

A. Cisco Expressway Series with MRA

The numbers on the floor plan represent the horizontal average lux readings for nine different room areas. Considering Cisco best practices, what can you conclude about the lighting conditions? A. Only three areas meet the room lighting levels that are recommended by Cisco. B. Only three areas do not meet the room lighting levels that are recommended by Cisco. C. All areas meet the room lighting levels that are recommended by Cisco. D. The areas do not meet the room lighting levels that are recommended by Cisco.

B. Only three areas do not meet the room lighting levels that are recommended by Cisco.

``` Which two devices are Cisco Digital Media Player Models? (Choose two.) A. Cisco MXE B. Edge 300 C. Edge 340 D. Cisco Cast ```

B. Edge 300 | C. Edge 340

``` Which configuration element can be used to specify the Multiway address that can be used by the endpoint to initiate Multiway calls? A. Conference 1 B. NetworkServices C. Provisioning D. SIP Profile 1 E. Video ```

B. NetworkServices

A voice engineer installed and configured Cisco TMSXE in a Windows Server and integrated with Cisco TMS. Which action can now be taken? A. Use Windows PC as a Cisco TelePresence endpoint. B. Start Cisco TelePresence meetings online. C. Schedule Cisco TelePresence meetings through Outlook. D. Start Cisco TelePresence meetings with Cisco TelePresence endpoints.

C. Schedule Cisco TelePresence meetings through Outlook.

``` An engineer is reviewing a SIP syslog on a TC software-based endpoint. Which area in the syslog indicates the start of the SDP session? A. a= B. v= C. b= D. m= ```

C. b=

``` Which type of lighting is recommended for Cisco TelePresence immersive solutions? A. point B. reflective C. direct D. indirect ```

A. point

``` Which Cisco DX series endpoint supports PoE? A. DX650. B. DX70. C. DX80. D. All DX endpoints support PoE. ```

A. DX650.

How would an administrator reset a Cisco VCS Control appliance to the default configuration? A. Via the CLI, log in as root and issue the factory-reset command. B. Via the CLI, log in as root and issue the reset-defaults command. C. Via the web GUI, log in as the administrator, choose Backup and Restore, and click the Factory Reset button. D. Hold down the power button for 10 seconds until the light flashes. E. Hold down the reset button on the back of the appliance for 10 seconds.

A. Via the CLI, log in as root and issue the factory-reset command.

Which statement is true about the Cisco TelePresence System 500-32 system regarding the HVAC needs for the room where it is installed? A. The system does not require any additional requirements above the normal HVAC requirements for the room. B. You must supply additional cooling requirements for the room. C. You must supply a room that has energy-efficient lighting to reduce the temperature of the room. D. The temperature of the room will be 10 to 20 degrees warmer than the rest of the building.

A. The system does not require any additional requirements above the normal HVAC requirements for the room.

``` Which two Cisco TelePresence endpoints are considered immersive endpoints? (Choose two.) A. C20 B. EX90 C. SX10 D. TX9000 E. IX5000 ```

D. TX9000 | E. IX5000

What is the main difference between a Cisco TelePresence Multipoint Control Unit and a Cisco TelePresence Multipoint Switch? A. The Cisco TelePresence Multipoint Control Unit is a hardware bridge. The Cisco TelePresence Multipoint Switch is a software bridge. B. The Cisco TelePresence Multipoint Control Unit is a software bridge for immersive and non-immersive endpoints. The Cisco TelePresence Multipoint Switch is a hardware bridge for non-immersive endpoints. C. The Cisco TelePresence Multipoint Control Unit delivers automatic voice-activated switching. The Cisco TelePresence Multipoint Switch provides active presence. D. The Cisco TelePresence Multipoint Control Unit has a latency of less than 10 ms, whereas the Cisco TelePresence Multipoint Switch has a latency of 100 ms.

A. The Cisco TelePresence Multipoint Control Unit is a hardware bridge. The Cisco TelePresence Multipoint Switch is a software bridge.

You have just finished installing a 65-inch dual profile system in a multipurpose room. After powering up the entire system, only one display is used. Using the information in the exhibit, why is the second display not displaying anything from the system? A. The Cisco TelePresence profile systems do not support dual display. B. The display is not powered on. C. The dual display option key has not been input into the codec. D. The codec has the appropriate option keys installed, so either the display is not cabled correctly, the codec is configured incorrectly, or there is no input being sent to the display.

D. The codec has the appropriate option keys installed, so either the display is not cabled correctly, the codec is configured incorrectly, or there is no input being sent to the display.

What is the process for resetting a Cisco VCS control appliance back to initial default configuration? A. Push down and hold the reset button on the back of the VCS appliance for 10 seconds and power cycle the device. B. Log onto the CLI console as root and initiate the defaults-reset command. C. Log into the GUI interface as administrator, choose System Settings, select Restore, select Factory Reset. D. Log onto the CLI console as root and initiate the factory-reset command.

D. Log onto the CLI console as root and initiate the factory-reset command.

``` Which CTS software-based endpoint is an ideal solution for an executive office? A. DX80 B. EX90 C. CTS 1100 D. CTS 500 ```

D. CTS 500

A user is unable to make a video call from an endpoint that is registered to the Cisco VCS. To isolate the cause, which two menu choices should the user check first? (Choose two.) A. Configuration > Call Policy B. Status > Registrations C. Status > Search History D. Status > System Information E. Configuration > Dial Plan > Search Rules F. Status > Event Log

C. Status > Search History | F. Status > Event Log

``` Which four characteristics are associated with video? (Choose four) A. greedy B. TCP retransmits C. UDP priority D. delay sensitive E. drop sensitive F. benign G. bursty ```

C. UDP priority D. delay sensitive E. drop sensitive G. bursty

``` An end user reports that the video they are receiving from a CTS-500 is showing a heavy blue tint. The room sending the video uses indoor artificial lighting. Which procedure must be performed to resolve the issue? A. camera focus balance calibration B. camera brightness mode: indoor C. camera auto adjustment D. camera auto adjust room environment E. camera temperature map adjustment ```

C. camera auto adjustment

A Cisco TelePresence EX Series desktop endpoint failed to register to a Cisco VCS. The SIP status shows "Failed: 403 Forbidden" in the endpoint's web interface. What is the first thing that should be checked in the endpoint configuration settings? A. Verify that the correct SIP authentication credentials have been configured. B. Ensure that CallSetup Mode is set to Gatekeeper. C. Verify that Outbound Connection Credentials are properly configured. D. Check to see that SIP Mode is set to On.

A. Verify that the correct SIP authentication credentials have been configured.

``` An engineer wants to stream Cisco TelePresence high-definition video to another location. The stream must be connected to an HDMI input on a display. Which two components, at minimum, are required to provide this functionality? (Choose two.) A. Cisco Media Experience Engine 3500 B. Cisco TelePresence Content Server C. Cisco Digital Media Player D. Cisco Digital Media Manager E. Cisco TelePresence Server ```

B. Cisco TelePresence Content Server | C. Cisco Digital Media Player

``` Which two issues does utilizing an IP network storage solution for IP video surveillance help overcome? (Choose two.) A. analog to IP conversion B. large, expandable storage space C. physical security D. scalability E. faster bit rate for storage ```

B. large, expandable storage space | D. scalability

``` While performing a password recovery on a Cisco TelePresence endpoint, what is the maximum amount of time for input to be received by the device before the system exits the password recovery mode? A. 15 seconds B. 20 seconds C. 30 seconds D. 40 seconds E. 60 seconds ```

E. 60 seconds

``` Which codec is most suitable for a video streaming solution? A. AAC-LD B. G.729 C. H.264 D. G.711 ```

C. H.264

An administrator is troubleshooting an endpoint whose SIP Registration Status shows "Failed: 403 Forbidden" and must obtain information about the cause of the failure. To which two menu locations must an engineer navigate? (Choose two.) A. Endpoint > Log Files > messages.log B. Endpoint > Diagnostics > Log Files > all.log C. VCS > Maintenance > Diagnostics > Incident Reporting > View D. VCS > Status > logs > Configuration Log E. VCS > Status > logs > Event Log

D. VCS > Status > logs > Configuration Log | E. VCS > Status > logs > Event Log

Which four features are provided by Cisco TelePresence Management Suite? (Choose 4) A. Scheduling of video conference calls B. Built-in-bridge functionality for multiparty video conferences C. SIP-H.323 protocol interworking D. Centralized management of conference resources E. SMTP email event notification F. Endpoint configuration backup and restore G. Cisco TelePresence endpoint automated redundancy H. Automated resource optimization

A. Scheduling of video conference calls D. Centralized management of conference resources E. SMTP email event notification F. Endpoint configuration backup and restore

``` Which 3 features are supported by Cisco TMSPE? (Choose 3) A. Simplified provisioning B. LDAP user import C. Scheduling via Microsoft Outlook D. FindMe E. Jabber for Windows F. Automatic endpoint upgrades ```

A. Simplified provisioning B. LDAP user import D. FindMe

``` Management wants to modify Cisco TMS to allow users to configure the call behavior with their associated devices and dial from a single ID. Which feature needs to be enabled and configured? A. Smart Scheduler B. Low-touch Provisioning C. FindMe D. CMR Provisioning ```

C. FindMe

``` Which configuration item shown in the exhibit should be used to assign the internal and external video communication server address for this group of users? A. User Settings>Video Address pattern B. Administrative Tools>Users Settings C. Configuration Template>Edit Template D. User Import>Configuration ```

C. Configuration Template>Edit Template

``` Which 4 features are supported by Cisco TelePresence Server for all hardware models in remotely managed mode?(Choose 4) A. auto-attendant B. ClearPath C. Cluster sizes of more than 5 servers D. Cascading E. Active presence for all devices F. Support for Conductor G. Native scheduling capabilities ```

B. ClearPath D. Cascading E. Active presence for all devices F. Support for Conductor

``` Which 2 protocols can be used with the Cisco TelePresence Content Server to allow users to share content from their laptops?(Choose 2) A. BFCP B. H.239 C. PCoIP D. Switched Presentation E. SCCP F. RDP ```

A. BFCP | B. H.239

Which 3 features does Cisco VCS provide?(Choose 3) A. native Cisco SCCP telephony integration B. SIP-H.323 interworking functionality C. native scheduling D. SIP trunk integration with CUCM E. third-part standards-based H.323 and SIP device registration F. reverse proxy functionality

B. SIP-H.323 interworking functionality D. SIP trunk integration with CUCM E. third-part standards-based H.323 and SIP device registration

``` A network engineer wants to automate the monitoring of Cisco TelePresence TX systems. Which step should the engineer take first? A. Configure Cisco TMS on the codec B. Configure Medianet on the codec C. Configure NTP on the codec D. Configure Multiway on the codec E. Configure SNMP on the codec ```

E. Configure SNMP on the codec

A Unified Communications engineer wants to configure a Cisco TelePresence SX endpoint using static IP addressing to use a different TFTP server. Which path will allow the engineer to complete this configuration? A. Network Services>Network 1>DCHP RequestTFTPServerAddress>Off B. Network>TFTP>DHCP RequestTFTPServerAddress>Off C. Network Services>TFTP>DHCP RequestTFTPServerAddress>Off D. Configuration>System Configuration>Provisioning>Set the External Manager Address

D. Configuration>System Configuration>Provisioning>Set the External Manager Address

A network engineer configures a CUCM and VCS integration via a SIP trunk. Endpoint A is able to conduct video calls to Endpoint B. When Endpoint A attempts to share presentation content with Endpoint B, Endpoint B sees the presentation video on the main screen rather than on the presentation display. What is the cause? A. The default MTP telephony payload is incorrect B. The SIP trunk is not running on all active CUCM nodes C. MTP is not forced to be required D. BFCP is not enabled E. The MTP preferred codec is incorrect for content presentation

D. BFCP is not enabled

A technician is tasked with performing a room readiness assesment in preparation for an immersive video endpoint. What are 3 Cisco best practices regarding lighting recommendations for the room?(Choose 3) A. The bulb temperature should be between 4000 and 4100K B. Key lighting should be between 200 and 400 Lux with the endpoint powered on C. Shoulder lighting should not exceed two times the facial lighting values with the endpoint off D. Use direct lighting fixtures E. Within the camera field of view, the lighting for all parts of the room should not fluctuate more than 100 Lux. F. Avoid using dimming light control systems

A. The bulb temperature should be between 4000 and 4100K C. Shoulder lighting should not exceed two times the facial lighting values with the endpoint off E. Within the camera field of view, the lighting for all parts of the room should not fluctuate more than 100 Lux.

A Cisco TelePresence VCS displays this alarm "Root password is set to default" How can this security warning be addressed? A. Use the Cisco TelePresence VCS web user interface, choose Administration>User Settings, and change the root password B. Use SSH to log into the Cisco TelePresence VCS as Administrator and issue the command xconfig root set passw C. Use SSH to log into the Cisco TelePresence VCS as root, issue the command set password and enter the new password D. Use SSH to log into the Cisco TelePresence VCS, issue the command passwd, and enter the new password when prompted E. Use the Cisco TelePresence VCS web user interface, choose Administration>System Settings, and change the root password.

D. Use SSH to log into the Cisco TelePresence VCS, issue the command passwd, and enter the new password when prompted

Cisco TMS is unable to manage endpoints and an engineer is required to capture logs to determine the cause. What is the menu path that the engineer should follow to capture and download logs from the Cisco TMS? A. Administrative Tools>Diagnostics>TMS Tickets B. Administrative Tools>TMS Server Maintenance>Download Diagnostic Files C. Systems>Navigator>Diagnostics>Download Diagnostic Files D. Systems>Navigator>TMS Logs

B. Administrative Tools>TMS Server Maintenance>Download Diagnostic Files

``` The firmware for the primary codec of a Cisco TelePresence System 3010 is being upgraded. Which codec CLI command could be used to check on the progress of the update? A. utils upgrade display B. utils system version C. show upgrade detail D. show system upgrade ```

C. show upgrade detail

A technician is trying to pair a Touch 8 with a Cisco TelePresence SX20 endpoint, but the codec is not automatically listed in the touch panel. What are two possible reasons for this behavior?(Choose 2) A. The codec firmware version is below verscion TC 6.1 B. The codec and Touch 8 are on separate subnets C. Pairing visibility mode is not active on the codec D. The codec is not compatible with a Touch 8 device E. The Touch 8 is connected via the second Ethernet port on the codec

B. The codec and Touch 8 are on separate subnets | C. Pairing visibility mode is not active on the codec

An engineer is creating a system backup on a Cisco VCS. Which 2 options describe the characteristics of Cisco VCS backups?(Choose 2) A. The backup can be sent to the remote SFTP server B. The backup can be encrypted with passwords C. The backup can be sent to additional servers in the cluster D. The backup is valid for 30 days E. The backup is stored in Cisco TMS F. The backup is only downloadable locally

B. The backup can be encrypted with passwords | F. The backup is only downloadable locally

``` A technician has installed an powered on a Cisco TelePresence MCU 5320 and is connected via the console port. The technician needs to determine the IP settings that were automatically assigned via DHCP. Which command should be entered? A. xstatus B. show network eth0 C. status D. help static ```

C. status

``` Management would like to setup a permanent recurring Cisco TelePresence meeting where the team would dial into a preconfigured number. Which meeting type should be used? A. scheduled conference B. ad hoc conference C. rendezvous conference D. multiway conference ```

C. rendezvous conference

A video conference user that is connected via a Cisco TelePresence Codec C40 to a conference that is hosted on a Cisco TelePresence MCU 5300 would like to switch the local layout view. Which two options describe how to switch the local layout view without affecting the view of remote users?(Choose 2) A. Use the Administrator settings from the local touch control B. Use the Participant settings from the MCU 5300 web interface C. Use the Call settings from the remote control D. Use the Call Control settings from the codec web interface E. Use the Conference settings from the codec web interface

B. Use the Participant settings from the MCU 5300 web interface D. Use the Call Control settings from the codec web interface

A large company wants to procure video conference devices that allow multipoint conferences from C-Series and immersive endpoints that are registered to a Cisco VCS and CUCM. Which two components meet the requirements?(Choose 2) A. Cisco TelePresence Multipoint Switch registered to Cisco VCS B. Cisco C-Series endpoints with a multisite option key registered to Cisco VCS C. Cisco TelePresence Server registered to Cisco VCS D. Cisco C-Series endpoint with a multisite option key registered to CUCM E. Cisco TelePresence Multipoint Switch trunked to CUCM

C. Cisco TelePresence Server registered to Cisco VCS | E. Cisco TelePresence Multipoint Switch trunked to CUCM

Which two of these can cause registration problems for a Cisco TelePresence Codec C40 endpoint running in H.323 mode?(Choose 2) A. The IP default gateway address is incorrect for the endpoint B. The H.323 license stack is not added to the endpoint C. The MAC address for the endpoint has not been added to the Cisco TelePresence VCS D. The E.164 H323 Alias has not been configured on the endpoint E. The URI address has not been configured on the endpoint

A. The IP default gateway address is incorrect for the endpoint D. The E.164 H323 Alias has not been configured on the endpoint

What is the importance of defining option 150 in the DHCP server for Cisco TelePresence endpoint? A. Option 150 is not important B. It is the TFTP server IPv4 address where the video endpoint retrieves its configuration file while booting C. It is the IPv4 address of the default gateway for the subnet that the video endpoint is connected to D. It is the configured SIP registrar and proxy server E. It is the unique NTP server IPv4 address

B. It is the TFTP server IPv4 address where the video endpoint retrieves its configuration file while booting