Essential Skills Modes Flashcards
High Gain
Position: Full flexion of the fingers and thumb at their MCP joints, maintaining PIP and DIP extention. The finger tips proximate each other but do not touch each other.
Purpose: 1. HG selects the active Master Point Entry #1, #2, or #3
#1-Forehead #2-Umbilicus #3-Saggital Pt. GV-20
2. Clarifies test subject responding to testing, reduces crosstalk
3. Installs the S.C.O.P.E. Files for the Hand Mode language
Procedure: Touch Thumb on the Master Point and fingers around the MP. If weak, hold the contact until strong, Pause Lock. If strong, test a different Master Point for weakness to enter

Bio-Electric/Bi-Lateral Integration
Position: Bilateral full contact of patient’s hands, palm and fingers.
Purpose: To merge the asymmetric composition of the body into one global unit and to enhance the energy depth of a query.
Procedure: With patient’s hands together the Dr. will either clasp together both hands of the patient or another bilateral skin contact for ten seconds and then Pause Lock before scanning or testing

Under Active Tissue
Position: Place the flat hand surface on the area of assessment.
Purpose: To discover or enter an underactive circuit for processing.
Procedure: Electrical File / PL / touch examination area with the flat hand / PL / Priority / EndPoint

Over Active Tissue
Position: Place thumb and four finger tips on the surface of the assessment area
Purpose: To discover or enter an overactive circuit for processing
Procedure: After Electrical File / PL / touch examination area with the finger tips / PL / Priority / EndPoint

Cross Talk
Position: Thumb tip into palmer space between ring and little finger MCP
Purpose: Detects contradiction of patient’s physical gravitation posture with neurological posture resulting in inconsistencies of testing.
Procedure: 1. Check patient’s neurological posture and reposition them to process OR 2. Place your hand on the neurological posture that matches their current posture and Pause Lock to start processing.

Local
Position: Simultaneously apply the four finger pads to the dorsum of the thumb.
Purpose: Indicates that local tissue requires more correction before advancing to the next End Point (Treatment Point) and activates Tissue Files of SCOPE.
Procedure: Scan the SCOPE tissue files for the local tissue in need of correction. Combine Local, Priority, SCOPE to select sequence of local treatment.

Remote
Position: Apply the thumb palmer surface simultaneously to the dorsum of the four finger nails.
Purpose: Indicates a remotely located adverse influence upon the local point, needing correction in another region of the body.
Procedure: If positive, it activates the Location Files to show you where to treat.

Priority
Position: Little finger fully flexed, pad to the palmer surface of the fifth metacarpal, just proximal to the fifth MCP joint.
Purpose: To open the tissue files or to select the FIRST tissue or condition or product from a series of options saved in Pause Lock.
Procedure: Apply this mode immediately before tissue modes for acquiring only one selection. Apply after locating the End Point to confirm your selected treatment point.

End Point
Position: Thumb tip to the little finger tip. A specific 90 degrees angle of thumb and finger is required.
Purpose: To direct you to location points of treatment. Weakness indicates to treat, strong indicates no treatment is needed.
- *Procedure:** 1. Indicates when you may move to the next treatment point.
2. Local or Remote tests then direct you to the next point of treatment location.
3. Identifies a location ready for treatment.

Change Time
Position: Full extension of the thumb, index and middle fingers, with flexion of the ring and little fingers so the finger tips contact the palm of the hand.
Purpose: To include another time of day significant in the display of a problem.
Procedure: Priority / Time, will select the most significant time for the symptomatic display. To identify the time check for the active meridian, horary terminal point.

Change Posture or Position
Position: Thumb pad to the dorsum of the flexed index finger’s extended PIP joint.
Purpose: Indicates if a change of body posture orientation to gravity or joint position is significant in the display of a problem.
Procedure: Insert POP query to detect other Gravitational Postures or Individual joint Positions to access additional causative factors.

Adaptation
Position: Thumb pad on the dorsum of the index finger DIP joint by slight flexion of the index PIP joint and the thumb joint.
Purpose: Adaptation may block access to Endpoint. Adaptation mechanisms may result in repetitive instability of corrections.
Procedure: If Endpoint fails to open, Adaptation reveals Submodes for Injury Recall, Reactive Tissue, Gait Dysfunction, and Miasm/DNA

Injury Recall
Position: Approximate the Index and Little Finger nails to contact. If necessary apply the Thumb to the Index finger to facilitate the contact.
Purpose: This screen test identifies the neurological memory flashback reactions of each file including Organs. Mechanoreceptors, Chemoreceptors, Neuro-Emotional, Bio-Electrical and VisceroSomatic.
Procedure: Hold this mode at the positive point of lesion during a weak challenge until clear and strong. This mode used at the site of the reactive tissue will identify the location for Local/Remote to an EndPoint to apply Local - Priority - SCOPE.
Injury Recall (Submodes)
Position: Partially flexed four fingers with finger tips into the palm of the hand. The thumb nail touchs the radial side of the index finger PIP.
Purpose: This screen test identifies neurological memory flashback reactions of each file. Mechanoreceptors, Chemoreceptors, Neuro-Emotional, and bio-Electrical.
Procedure: Hold this mode at local site or Submode to the specific SCOPE File and Time / POP / IRC to clear all time, postures and positions.

Reactive Tissue
Position: Full flexion of the four fingers at the PIP and DIP joints, with full extension of the MCP joints.
Purpose: A screen test to identify a condition of over active tissue robbing energy, causing under active tissue. ie. Reactive muscle syndrome but Reactive can affect ANY tissue ie. Organs.
Procedure: Hold this mode at the positive point of lesion during a weak challenge until clear and strong. This mode may also process to identify the two tissue locations or EndPoint to treat.

Miasm / DNA
Position: Approximation of the index finger and ring finger nail margins
Purpose: Identifies a genetic propensity towards an emotional-somatic stress induced dysfunction.
Procedure: Upon locating a miasmic response, PL, Electric File, Priority, End Point and treat. Using More Local, or More Remote scan the SCOPE files for archived influences such as Methylation defects, Allergies, Injury Recall, and scar tissue.

Gait Dysfunction
Position: Tuck the ring and little finger tips to the palm, flex index and middle finger to touch the tip of the thumb.
Purpose: Screen test for conditions of ambulation causing instability and inflammation. Test is performed during a static posture to detect conditions not otherwise known until walking or running.
Procedure: Hold the mode at the point of detection until clear and strong or process with EndPoint.

Change Hologram
Position: With the ring and little finger approximated, contact the thumb tip to the two finger tips.
Purpose: A positive test indicates to check other holographs representing the current local point.
Procedure: Check cranium, upper extremity, lower extremity for the same location for additional corrections.

Calculate
Position: Finger nails of flexed index and ring fingers contact the palmer surface of the thumb DIP joint.
Purpose: To transpose the files into numerical values for counting.
Procedure: After the calculation mode, PL, count with the finger tips to the palm and Pause Lock the count. Then More Remote, if positive repeat the count for the second digit, etc of the number.

Structural File
Position: Tip of Index finger into the center of the palm.
Purpose: Indicates a Structural tissue disorder. Histological morphology of each tissue resonates a specific frequency. This frequency has been used to design each tissue mode.
Procedure: Test the Structure modes and treat as indicated.

Bone Displacement
Position: Thumb pad to the index finger pad.
Purpose: Indicates malposition of an osseous joint.
Procedure: Realignment may be with mechanical pressure or with muscle reactivation. Adjust to the Priority vector with consideration of Priority posture (Orientation to gravity).

Muscle
Position: Apply thumb pad on the dorsum of the index finger nail.
Purpose: Displays weak, inhibited, dysfunctional muscle.
Procedure: For Local application challenge for stretch or compression of the axial line of fibers. Remote application requires finding Location and another Priority / Tissue procedure.

Ligament
Position: Thumb DIP joint to the radial side of the fully flexed PIP joint of the index finger, also fully flexed at the MCP joint.
Purpose: Indicates a Ligament Golgi defect.
Procedure: Compress the fibers along the axis of the ligament.
Challenge for the other angles of significance.

Tendon
Position: Thumb DIP joint to radial side of straight PIP joint of the index finger, fully flexed at the MCP joint.
Purpose: Indicates a Golgi Tendon defect.
Procedure: Compress the fibers along the axis of this tendon. Challenge for other angles of significance. With inflammation find the associated disc.



















































