ESWS Engineering Flashcards
(116 cards)
Where is the AFT main machinery room located?
Forward of hangar bay elevator room all the way down.
Where is AUX machinery room located?
Below ships laundry
Where is forward emergency diesel located?
Two decks below Chiefs berthing port side.
Where is aft emergency diesel generator?
AftCHT Pump room
What are the four phases of the basic steam cycle?
Condensation phase
Generation phase
Expansion phase
Feed phase
What is the major equipment in the generation phase
Economize and boiler
What is the major equipment in the expansion phase?
Main engine
High pressure/ low pressure turbine
SSTG
Reduction gears
What is the major equipment in the condensation phase?
Main condenser/hot well Aux condenser/hot well Main condensation pump Aux condensation phase Main circ pump Aux circ pump Main air ejector condenser Aux air ejector condenser First stage feed heater
What type of boiler does the boxer have?
V2M D-type boiler ((700 psi)
What are 3 modes that you can operate a boiler in?
Remote manual
Local
Automatic
What is the operating steam pressure and temperature for the main steam system?
700 psi at 900 F
Name the major parts of the boiler?
Economizer Steam drum Generating tubes Super heater De-superheater/water drum Furnace Force draft blowers Port use fan
Where is the #2 boiler located?
Forward MMR
Where is the number 1 boiler located?
Aft MMR
What is the function of the DFT?
Stores up to 3,500 gallons
De aerates condensate
Pre heats condensate to 250 F
How many feed pumps are on boxer?
4
How many fuel oil service pumps does the boxer have?
4
What are the boilers used for?
To produce main and aux steam for ships propulsion, electrical power, water production.
Where is 1A forced draft blower located?
AFT MMR
What is the function of the main feed booster pump?
Moved feed water from the DFT to the MFP
How many lube oil pumps are on the boxer?
6
What is the function of the feed water control valve?
Controls the amount of feed water to enter the boiler
What are the 3 elements of the automatic boiler control valve?
Feed water control
Fuel oil control
Combustion air control
What is the purpose of the CHELANT system?
To treat boiler water to prevent scale formation inside boiler tubes and to minimize corrosion that will damage boiler tubes