Eurosicma

Question 1

System dedicated to the forming of the back and the introduction of the product inside the pack

Answer 1

Wrapping machine

Question 2

System composed of 8 independent belts

Answer 2

HSF 8 Feeder

Question 3

Receives the products from system upstream

Answer 3

HSF 8 Feeder

Question 4

It synchronizes and feeds them to the conveyor chain of the wrapping machine

Answer 4

HSF 8 Feeder

Question 5

Bags pre pulling system composed by rollers and situated in the sachet feeding unit

Answer 5

Pre feeder

Question 6

Parts of sachet feeder where sachets are cut and then placed on the products

Answer 6

Bags cutting knives (COL, COL2)

Question 7

System of rollers for pulling and phasing of seasoning sachets situated in the sachets feeding unit

Answer 7

Bags Pulling unit (CAB, CAB2)

Question 8

Product transferring system from HSF 8 Feeder to conveyor chain of wrapping machine

Answer 8

Transferrer (GAL)

Question 9

Any reference made to any object or device placed upstream of the product flow

Answer 9

Upstream

Question 10

Any reference made to any object or device placed down stream of the product flow

Answer 10

Downstream

Question 11

Oscillating arm that adjusts film tensioning

Answer 11

Dandy roll

Question 12

Conveying unit made up of stainless steel sliding planes onto which guides are fitted

Answer 12

Conveying Chain and pusher

Question 13

Part of the machine where the edges are longitudinally sealed

Answer 13

Longitudinal sealing cylinders (CSL)

Question 14

Part of the machine where the package are transversally sealed and cut

Answer 14

Transversal Sealing Cylinders (CST)

Question 15

Part of the machine that supports the film reels and that carries the film to the forming machine via rollers

Answer 15

Double reel holder (DPB)

Question 16

Unit in stainless steel placed on the conveyor chain near cylinders.

Answer 16

Forming Unit

Question 17

It forms the film tube and “wraps” the product to be packed which is conveyed by the pushers of the chain.

Answer 17

Forming Unit

Question 18

Part of the machine that constantly pulls the wrapping material

Answer 18

Paper Pulling (GTC)

Question 19

Part of the machine which allows for reel automatic change

Answer 19

Automatic Reel Splicer (GBA)

Question 20

Part of the machine used to move the products away after the sealing and cutting phase has been completed

Answer 20

Packs output belt (NUC)

Question 21

Common Machine Trouble

Answer 21

Weak Seal (End Sealer CST)
Weak Seal (Long Sealer CSL)
Pouch not properly cut in CST (end sealer)
Phase or length of pouch not correct (Off centered)

Question 22

Common Machine Trouble

Answer 22

Phase or length of pouch not correct (Seasoning and SS/Oil)

Trap Pouch

Question 23

Common Machine Trouble

Answer 23

• Reel change cycle is activated but splicing rollers fail to close
• Overheat pouch