Failure Codes, Action Codes, Status, Shop Code Flashcards
Memorize (35 cards)
What are the 3 “C” stands for?
Shop Code for “Commo”, Status Code for “Awaiting Shop”, Action Code “Repair”.
Complaint, Cause, Corrective Action
What’s the failure code for Lube Over/Under?
500
What’s the Shop Code for Allied Trades/Fabrication/Paint/Welding?
B
Besides Allied Trade, where is code “B” also used?
Work Order Status “In Shop”, Action Code “Adjusted”
What’s the failure code for “AOAP Failure”?
916
What’s “A” Status in the work order?
Awaiting Initial Inspection
What’s action code “C”?
Repaired
Where do you use the letter “F” in the work order?
Shop Code for “Washrack”, Work Order Status “Final Inspection Completed”, Action Code “Initial Inspection”.
What’s the failure code for Battle Damage?
731
What are the failure codes 290,306 and 374 stand for?
Fails Automatic Diagnostic Test, Contamination, and Internal Failure Non-Mechanical
What’s the letter “D” stands for in the work order?
Shop Code for DS Shop, Work Order Status of “Deffered”, Action Code for “Manufacture/Fabrication”
What are the Failure Codes for “Missing Components”, “Diagnostic Failure”, and “Required Maintenance Action”?
750,915,998
What’s the failure code for “Fluid Leak”?
381
What’s the Action Code for “Manufacture/Fabrication”?
D
What’s Work Order Status Code 1, 5, 6, and 8?
1: Awaiting NMCS Parts, 5: Schedule Service, 6: Re-inspection used after Re-Work, 8: Re-Work Return To Shop.
What do you inspect on an Air Compressor?
Leaks- air, oil, coolant
What’s the difference between Form 2404 and Form 2407, and what are they use for?
2404- contains customer information- unit contact email phone, type of vehicle, deficiencies,correction, who performed the repair, info about slash, dash and X deadline. DA Form 2404 is the central record for managing and controlling maintenance. DA Form 2407 is used by organizational maintenance personnel mainly to request support maintenance. It is used when organizational maintenance personnel cannot repair a piece of equipment because of a lack of ability or proper tools. All copies of DA Form 2407 are sent with the faulty equipment to the support activity. The receipt copy is sent back to the owning organization where it is kept on file until the equipment is returned.
DA Form 2407 is also used to report maintenance on certain sample items and to submit warranty claims.
DA Form 2407-1 is used where there are not enough lines on DA Form 2407. DA Form 2405 is used by the
owning organization to keep a record of DA Forms 2407 sent to support maintenance
What do you use the MAC Chart for and in which publication can you find it?
Mac Chart gives allowable time to perform a task. 23 level publication. Also in publication -15p.
Explain the usage of FEDLOG?
FEDLOG is use to cross reference parts and verify they are correct before ordering, gives manufacture, cage information and if there is core in the part or not.
What is ECOD and when is use?
Estimated Cost Of Damage, Used to see if a vehicle repair is cost effective or not.
What are the failure codes 068,099, 115, and 135?
Inoperative/BIT Failure, Other/Unknown/Broken, Damaged Shipping/Storage, Binding friction excessive.
What are the Failure codes for “Accident Damage” and “Battle Damage”?
717, 731
What are Work Order Codes: G,I, J and K?
G: Test Flight/Maintenance checks, I: Awaiting Shop (Awaiting, non-NMC Parts), J: In Shop Awaiting Parts, Work Continues, K: Awaiting Parts (non- NMC’s)
What are Action Code J, K, L, R, ans S?
Tested, In-Process Inspection, Remove and Install, Remove, Install
