Final

Question 1

Preliminary impressions/casts:

starting point with preliminary _____ impressions and casts

Answer 1

edentulous

Question 2

Preliminary impressions/casts:

to better determine the need for any necessary surgical _____

Answer 2

corrections

Question 3

Custom Trays:

to make specific max and mand trays for each pt. for a more accurate, _____

Answer 3

customized impression

Question 4

Custom Trays:
To use a tray as a guide and receptacle _______ the appropriate amount of impression material to the exact, required areas

Answer 4

to deliver

Question 5

Custom Trays:

to fabricate appropriately sized tray handles that do not _____ w/ the anterior lips and the opposing arch

Answer 5

interfere

Question 6

Wax Spaces:

to place a _________________ was a vertical stop for the adequate initial seating of the custom tray in the mouth

Answer 6

1 thickness of pink baseplate wax

Question 7

Border molding (experienced based procedure):
to \_\_\_\_ the border areas of a custom tray with a heat malleable compound material or an elastic impression material by functional or manual manipulation of the soft tissue adjacent to the borders to duplicate the contours and depth of the vestibule

Answer 7

shape

Question 8

Border molding (experienced based procedure):
To \_\_\_\_\_the total peripheral depth of the vestibule for both arches and to seal the posterior dam area of the denture

Answer 8

seal/close

Question 9

Border molding (experienced based procedure):
To accurately capture the \_\_\_\_of all frenum attachments

Answer 9

relief

Question 10

Border molding (experienced based procedure):
to \_\_\_\_ the tuberosities

Answer 10

cover

Question 11

Beading and boxing the final impressions:

To ____the final edentulous impression to preserve the vestibular contours (bordering molding) of the final impression

Answer 11

bead and box

Question 12

Beading and boxing the final impressions:

To insert the final impression into base allowing ____ to show

Answer 12

4mm

Question 13

Beading and boxing the final impressions:

To create a ____ peripheral land area to protect the cast

Answer 13

4mm

Question 14

Beading and boxing the final impressions:

To pour in _____and allow to let set for at least 45 minutes

Answer 14

yellow stone

Question 15

Beading and boxing the final impressions:

to retrieve the casts by _____ and to trim accordingly

Answer 15

soaking in hot water

Question 16

Temporary baseplates and occlusal wax rims (templates):
To _____ temporary baseplates with occlusal wax rims (templates) to record the patient’s maxilla-mandibular ridge positions

Answer 16

make

Question 17

Temporary baseplates and occlusal wax rims (templates):

To ______ the maxillary baseplate to eliminate any gag reflex

Answer 17

adjust

Question 18

Temporary baseplates and occlusal wax rims (templates):

To ______ an acceptable _____ of the patient’s face

Answer 18

identify and record,

midline

Question 19

Temporary baseplates and occlusal wax rims (templates):

To establish and record the _____________

Answer 19

maxillary occlusal plane

Question 20

Temporary baseplates and occlusal wax rims (templates):

To establish an acceptable_______

Answer 20

vertical dimension

Question 21

Temporary baseplates and occlusal wax rims (templates):

To establish and record a repeatable _____ position

Answer 21

centric relation

Question 22

Temporary baseplates and occlusal wax rims (templates):

To ______ a semi-adjustable Arcon articulator to standard settings

Answer 22

adjust

Question 23

Temporary baseplates and occlusal wax rims (templates):

To ______ the casts via the baseplates onto the articulator

Answer 23

mount

Question 24

Fox plane and face-bow transfer:

To determine and record the level position of the ______

Answer 24

max. occlusal plane

Question 25

Fox plane and face-bow transfer: To use the ______ to parallel the maxillary occlusal wax rim to the ala-tragus line (Camper’s line) and the interpupillary line

Answer 25

Fox Plane

Question 26

Fox plane and face-bow transfer: | To insure that no record is taken on the _______ of the bite-fork of the face-bow transfer

Answer 26

bottom

Question 27

Hanau semi-adjustable arcon articulator: To use an ____________ similar to human anatomical guidelines with the condylar fossa/path in the upper member (arch) and the condylar head/element in the lower member (arch)

Answer 27

Arcon articulator

Question 28

Hanau semi-adjustable arcon articulator: | To lock the articulator into the __________ only for mounting

Answer 28

hinge mode

Question 29

Hanau semi-adjustable arcon articulator: | To accept/mount the face-bow transfer record (_________)

Answer 29

Max arch

Question 30

Hanau semi-adjustable arcon articulator: | To accept/mount the centric relation record (__________)

Answer 30

mand arch

Question 31

Vertical Dimension of rest and occlusion-experienced based procedure: To adjust the _______ maxillary/mandibular baseplates and occlusal wax rims to the necessary superior-inferior relationship to allow the teeth to be in the proper maximum inter-cuspation

Answer 31

Stable

Question 32

The interocclusal distance should be at least ______

Answer 32

3mm

Question 33

Vertical Dimension of rest and occlusion-experienced based procedure: To align a _________ wax rim flat occlusal surface to a ___________ wax rim flat occlusal surface

Answer 33

stable mand, | stable maxillary

Question 34

Vertical Dimension of rest and occlusion-experienced based procedure: The interocclusal distance should allow for an adequate amount of space for the _________ and the addition of a __________________

Answer 34

thickness of two base-plates, | complete set of maxillary and mandibular denture teeth

Question 35

Vertical Dimension of rest and occlusion-experienced based procedure: To present for functional acceptance an ____________ between the Maxillary baseplates with occlusal wax rims and the ____________ baseplates with occlusal wax rims

Answer 35

unrestrictive relationship, | Mandibular

Question 36

``` Centric Relation (CR) (experienced based procedure): To manipulate (________) the mandibular arch with a ____________ baseplate and wax rim in place into a ____________ position that can be recorded and mounted onto a semi-adjustable articulator ```

Answer 36

at least 3X, Stable, reproducible

Question 37

``` Centric Relation (CR) (experienced based procedure): To record a maxilla-mandibular relationship _____________ ```

Answer 37

in which the condyles and disks are thought to be in the anterior, uppermost position

Question 38

``` Centric Relation (CR) (experienced based procedure): To record the most retruded relation of the mandible to the maxillae when the condyles are _________________ ```

Answer 38

in the most posterior unstrained position in the glenoid fossae from which lateral movements can be made

Question 39

``` Centric Relation (CR) (experienced based procedure): To verify that the centric relation record can be successfully _________ ```

Answer 39

repeated

Question 40

``` Centric Relation (CR) (experienced based procedure): To insure that the articulator settings, casts, and registrations have been standardized, stabilized and are _____________ ```

Answer 40

all secured in place

Question 41

``` Centric Relation (CR) (experienced based procedure): To ____________ of the maxillary edentulous ridge to the mandibular edentulous ridge by using baseplates and wax rims ```

Answer 41

achieve the proper position

Question 42

Selection of anterior and posterior denture mold and shade: | To select the ______ of the anterior teeth with patient involvement

Answer 42

mold

Question 43

Selection of anterior and posterior denture mold and shade: | To select the ______ of all denture teeth with patient involvement

Answer 43

Shade

Question 44

Selection of anterior and posterior denture mold and shade: | To select the ________ of the posterior teeth

Answer 44

cuspal angulation and size

Question 45

Selection of anterior and posterior denture mold and shade: To select the cuspal angulation and size of the posterior teeth: To evaluate pt's ability to ______ centric relations

Answer 45

repeat

Question 46

Selection of anterior and posterior denture mold and shade: To select the cuspal angulation and size of the posterior teeth: To utilize the _______ chart for equivalent sizes

Answer 46

mold (mould)

Question 47

Setting of denture teeth: To align the _____________ as to prescribed parameters: midline, high lip line, canine line, and following the wax rim contours

Answer 47

maxillary anterior 6 teeth

Question 48

Setting of denture teeth: | To align the ________ as to prescribed parameters: no deep-bite, no protrusive interferences, no canine guidance

Answer 48

mandibular anterior 6 teeth

Question 49

Setting of denture teeth: | To set the _______ posterior teeth___________ and to follow the wax rim contours avoiding any cross-bites

Answer 49

mandibular, | over the crest of the ridge

Question 50

Setting of denture teeth: | To set the _______ posterior teeth on a flat plane and to follow the mandibular curve and avoiding any cross-bites

Answer 50

maxillary

Question 51

Preparation for processing of the complete denture: | To insure that the ___________ has been properly scribed into the maxillary master cast

Answer 51

posterior palatal seal

Question 52

fact: Complete dentures cannot replace your natural teeth. They are to replace the teeth that you do not have

Answer 52

fact: Complete dentures cannot replace your natural teeth. They are to replace the teeth that you do not have