Flight Instruments/Instruments/Comm Flashcards

1
Q

How is PFD and MFD backlighting controlled with the CKPT panel dimmer in the OFF position?

A

Photocell technology is used to automatically adjust backlighting for ambient lighting conditions.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

How many ADS systems are available?

A

Three; ADS 1, ADS 2, and STBY

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

The airspeed trend vector shows what the airspeed will be in how many seconds?

A

6 seconds

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

What does a yellow altimeter seting indicate?

A

The right and left altimeter settings differe by 0.02Hg

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

What does the green circle on the airspeed indicator indicate?

A

1.3 Vs

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

What happens to the PFD2 and the MFD in the event the left side PFD fails?

A

The MFD enters reversionary mode and PFD2 remains normal.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

What is the primary source of navigation in the Phenom 300?

A

GPS

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

How many GPS receivers does the airplane have?

A

Two, one in each GIA

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

What is the function of the CPL pushbutton?

A

Swaps autopilot between the PF and PM (between seats…)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

When in T/O or G/A mode, what must be true for ALT pre-selected mode to arm?

A

The preseleted altitude must be greater than or equal to 400 ft from the aircraft altitude.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

During what approach condition will the FD not level at a preselected altitude?

A

When coupled to a glideslope or glidepath.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

Where is the date required to operate the Phenom 300 in RVSM airspace found?

A

AFM supplement 1

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

If one ADS fails in flight, is the plane in compliance with RVSM?

A

No, two RVSM compliant air data systems, one autopilot with altitude hold moe, one altitude alerter, and one transponder must be operating

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

Does the equipment failure need to be reported to ATC?

A

Yes, and a new clearance must be obtained

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

What is the maximum difference between the two primary altimeters if planning to fly in RVSM?

A

+/- 75 ft

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

Can the IEST be used for RVSM operation?

A

No.

17
Q

What pilot action automatically tunes 121.5 as the active COM frequency?

A

Pressing the COM frequency toggle for 2 sec

18
Q

What automatically happens if the PTT key becomes stufk?

A

The COM transmitter stops transmitting after 35 sec of continuous operation