Flt Instrumentation

Question 1

The primary source for speed, altitude, attitude, and inertial navigation position information is/are the ____.

Answer 1

ADIRU

Question 2

The ISFD receives attitude information from ______.

Answer 2

Internal inertial sensors

Question 3

When an inboard display selector is in the PFD position, new displays selected from the display select panel to that inboard display are ____.

Answer 3

inhibited

Question 4

The localizer pointer is in view when ____.

Answer 4

the localizer signal is received

Question 5

It is necessary to delay push back or taxi until the ADIRU alignment is complete.

Answer 5

True

Question 6

The crew enters the most accurate present position available. The most accurate position is ____.

Answer 6

Global Postioning System

Question 7

If the ADIRU switch is inadvertently turned off in flight, the ADIRU ____.

Answer 7

system logic prevents the ADIRU from being switched off in flight

Question 8

If the ADIRU switch is left ON when power is removed from the airplane and the battery switch is OFF, ____.

Answer 8

the ON BATT light illuminates, and the ground crew call horn sounds

Question 9

The ILS is tuned automatically or manually. How can you tell if the ILS is tuned manually?

Answer 9

Manual tuning is indicated by an M on the CDU NAV RAD page.

Question 10

During preflight, you notice that the NO V SPD flag is displayed, you should ____.

Answer 10

realize this is normal until the takeoff reference speeds are selected through the CDU

Question 11

Maximum maneuvering speed, when displayed, indicates maneuver margin to high-speed buffet. This may be displayed when operating at high altitude at high gross weights.

Answer 11

True

Question 12

Minimum maneuvering speed indicates maneuver speed margin to stick shaker or low speed buffet.

Answer 12

True

Question 13

Minimum speed indicates where stick shaker activates.

Answer 13

True

Question 14

The Pitch Limit Indicator, PLI, shows the pitch angle at which stick shaker occurs, based on current flight conditions. The PLI displays automatically when the flaps are ____.

Answer 14

not up, or at slow speeds with flaps up

Question 15

The symbol for the Left VOR pointer head and tail on the ND is a ____.

Answer 15

single bar and green

Question 16

The green altitude range arc displayed on the ND map indicates the approximate map position of ____.

Answer 16

where the MCP altitude will be reached based on current VSI

Question 17

Which of the following statements is true regarding the electronic checklist line items?

Answer 17

Incomplete checklist items appear as white text, completed items appear green, and overridden items appear as cyan text.

Question 18

The box around the current airspeed indication turns amber when airspeed is ____.

Answer 18

below minimum maneuvering speed

Question 19

The ISFD displays Airspeed and Altitude data from ____.

Answer 19

The Center Pitot-Static System/Standby Air Data Modules

Question 20

The Angle of Attack (AOA) indicator features an Approach Reference Band (green) highlighting a proper AOA indication with flaps set at final approach speed. Which of the following statement is correct?

Answer 20

The green AOA band applies to Flaps 20, 25, or 30 only

Question 21

The Angle of Attack (AOA) indicator features an Approach Reference Band (green) highlighting a proper AOA indication with flaps set at final approach speed. Which of the following statement is correct?

Answer 21

The green AOA band applies to Flaps 20, 25, or 30 only

Question 22

What is indicated by the green Altitude Range Arc displayed on the Navigation Display (ND) when climbing or descending?

Answer 22

The approximate MAP position where the MCP selected altitude will be reached based on the current vertical speed and groundspeed.

Question 23

Where is the Navigation Source Reference displayed (indicating the source of navigation performance for the PFD navigation scales)?

Answer 23

Above the left corner of the Attitude Indicator.

Question 24

The marker beacon indication is located at the upper right corner of the Attitude Indicator.

Answer 24

True

Question 25

What would be the indication(s) if ANP equals RNP?

Answer 25

The white deviation bars turn amber.

The white deviation bars meet in the middle.

All of the above.

Question 26

Vertical speed is digitally displayed above or below the vertical speed display when vertical speed is greater than _____ feet per minute.

Answer 26

400

Question 27

What is indicated if the landing altitude reference bar is amber?

Answer 27

The aircraft is within 500 feet of the landing altitude.

Question 28

Which of the following is normally used to set approach minimums (RADIO or BARO) that display on the PFD?

Answer 28

EFIS Control Panel

Question 29

Select the true statement(s) regarding the minimum maneuvering speed indication (amber band).

Answer 29

It indicates maneuver speed margin to stick shaker or low speed buffet.

Question 30

When is the Pitch Limit Indication (PLI) displayed on the PFD?

Answer 30

When the flaps are not up or at slow speed with the flaps up.

Question 31

The Minimum Speed Indication (red zipper) indicates the airspeed where the stick shaker activates.

Answer 31

True

Question 32

The Localizer and Glideslope pointers turn solid when within 2.5 dots from center.

Answer 32

True

Question 33

If you have to make an emergency descent, the Emergency Descent checklist can be found in the electronic checklist under ____.

Answer 33

Unannunciated Checklists

Question 34

In which section of the QRH would you find the Unannunciated Checklist for “Lavatory Non-Normals”?

Answer 34

AIRCRAFT GENERAL