Indicating Flashcards Preview

Mesa CRJ-900 > Indicating > Flashcards

Flashcards in Indicating Deck (24):
1

What color are warning messages?

Red

2

When warning messages are displayed, they are accompanied by:

Flashing master warning
Aural Alert
Voice Advisory if applicable

3

What color are Caution messages?

AMBER(YELLOW)

4

Caution messages will appear immediately below what?

Warning Messages

5

When caution messages are displayed, they will be accompanied by:

A flashing master caution light

6

Warning and caution messages will normally appear on the:

Primary EICAS display

7

What color are advisory messages?

Green

8

Which messages are always displayed on the very top of the status page?

Advisory

9

What color are status messages?

White

10

There are how many types of aural warnings provided to alert the crew?

10

11

Which Warnings cannot be silenced by pushing the MASTER WARNING push button?

Stall warbler
Stabilizer trim clacker
Gear horn
GPWS/TCAS voice or aural alerts Overspeed clacker
Flap clacker
AP disconnect cavalry charge
Takeoff Configuration warnings

12

Data Concentrator Units(DCU's) do what task?

Process and transmit aircraft sensor data to the Flight Data Recorder(FDR) and EICAS lamp driver unit

13

How do you box CAUTION and STATUS messages?

Pressing the CAS button will box Caution Messages, pressing the STAT button will box Status Messages

14

With just the battery master turned on, how long can the CRT's be operated for?

5 minutes with no AC to power the cooling fans

15

What always accompanies a master caution switchlight?

A single chime

16

Are the GPWS and TCAS aural warnings disabled by selecting the AUDIO WARNING disable switches on the copilots side panel?

No

17

Which four buttons on the EICAS control panel(ECP) will still operate if the ECP microprocessor fails?

PRI
CAS
STAT
STEP

18

What indications can be displayed on the N1 gauges?

APR
REV
Thrust Setting

19

During flight when will the landing gear and flap position display be removed?

When all of the following are met:
* The wheel brake temperatures are in the normal range
* Landing gear is up and locked
* Flaps are up
The gear and flap position indication will be displayed again when either is selected

20

During flight when will the brake temperature indicators be removed from display on ED2?

When all three of the following conditions are met:
* Landing gear is up and locked
* All brake temperatures are normal
* Flaps are up

21

What happens if ED1 fails?

The primary page is automatically transferred to ED2

22

During pushback and starting the engines, a white FDR FAIL status message appears.  What would you do?

The beacon switch is probably not on

23

When will the APU RPM and EGT gauge be displayed?

The APU RPM and EGT gauge is displayed when the APU PWR FUEL switchlight is selected

24

How is the lamp light intensity set to bright or dim?

The IND LTS switch on the miscellaneous test panel sets lamp intensity