L-204

Question 1

What is the purpose of the L-204?

Answer 1

It is used to provide immediate temporary lighting or infrared lighting in support of high tempo battlefield night operations

Question 2

What powers the VIPIR light?

Answer 2

A single 3 V type 123 lithium battery

Question 4

What is in bin #1?

Answer 4

Bubble wrap for repacking

Question 6

What is in pouch #5?

Answer 6

Anchors

Question 7

With a new battery how long can the VIPIR light last?

Answer 7

16 hours

Question 8

What is in bin #3?

Answer 8

Smaller components required to assemble wind indicator assembly

Question 10

What is the VIPIR submersible to?

Answer 10

330 feet

Question 11

How many LED lights does the VIPIR light consist of?

Answer 11

9 light emitting diode’s

Question 12

What is in pouch #3?

Answer 12

Bases

Question 14

What are the colors for the day panel marker?

Answer 14

Orange for threshold and marking

Cerise for TLZ edge and distance marking

Question 16

What outputs are the VIPIR Light capable of outputing?

Answer 16

Red, blue, green, white, and Infared

Question 17

When set to flashing what is the flash rate of the VIPIR light?

Answer 17

80 flashes per minute

Question 20

What is in bin #2?

Answer 20

Day marker installation pieces

Question 23

What is in pouch #4?

Answer 23

Batteries

Question 24

What is the purpose of the universal mounting base?

Answer 24

It provides a means to secure the VIPIR light to multiple operating surfaces and also allows it to be rotated up to 180°

Question 25

What does the remote control receiver allow the VIPIR light do?

Answer 25

Turn it on and off, switch colors, and select steady or flashing output

Question 26

What powers the VIPIR light receiver?

Answer 26

A single 1.5 V AA battery that provides 48 hours of operation

Question 27

What is the purpose of the remote control transmitter?

Answer 27

It is used to control the output of any VIPIR light fitted with a remote control receiver within range

Question 28

What powers the remote control transmitter?

Answer 28

To 1.5 V AA batteries

Question 29

At 1 MHz does the remote control transmitter operate at?

Answer 29

433.92 MHz

Question 30

What are the contents of pouch #1?

Answer 30

20 VIPIR lights

Question 31

What are the contents of pouch #2?

Answer 31

30 remote control receivers
2 remote control transmitters
40 antennas

Question 32

What are the contents of pouch #3?

Answer 32

30 universal mounting bases
100 8” cable ties
100 14” cable ties

Question 33

What are the contents of pouch #4?

Answer 33

60 type 123 batteries

64 type AA batteries

Question 34

What are the contents of pouch #5?

Answer 34

2 safety wire rolls 50 spikes 100 concrete anchors

Question 35

What are the contents of pouch #6?

Answer 35

``` 2 Phillips head screwdriverss 2 flat head screwdrivers 2 diagonal pliers 2 safety wire twisters 25 Masonary drill bit 2 hand held rock drills 2 Hammers 1 shovel ```

Question 36

What is the purpose of the panel markers?

Answer 36

To mark tactical landing zones and daytime Forward arming and refueling points sites

Question 37

What is the purpose of the wind indicator assembly?

Answer 37

Provides wind direction information to aviators as well as ground personnel

Question 38

Which way should the battery compartment be facing?

Answer 38

Towards the approaching aircraft

Question 39

How do you install the universal mounting base in soil?

Answer 39

Using two 6 1/2” titanium spikes

Question 40

How do you install the universal mounting base to asphalt concrete?

Answer 40

Using 3/16” concrete drive anchors

Question 41

How do you install the universal mounting base to A-2 matting?

Answer 41

Using two 1” long by 1/4” diameter self driving hex screws

Question 42

What is not reused with the universal mounting base?

Answer 42

Previously used screws and drilled holes

Question 43

What extra step must be completed in order to properly secure the VIPIR light?

Answer 43

Cable tire to the mounting base

Question 44

How far must the overrun be for AMP configurations

Answer 44

300’ on each end

Question 45

How far must the wind indicator be from the VTOL pad?

Answer 45

150’

Question 46

What position must the switch ring be in in order to use the remote control receiver?

Answer 46

The first or seventh position

Question 47

What controls the VIPIR light operation?

Answer 47

An 8 position switch ring

Question 48

What occurs when the batteries are installed in reverse polarity?

Answer 48

The lights will flash

Question 49

What type of polarity does the VIPIR light use?

Answer 49

Reverse polarity switching mechanism

Question 50

What is in pouch #2?

Answer 50

Remotes

Question 51

How many bins are there in the L-123

Answer 51

3

Question 54

What is in the 6 foot mat platform?

Answer 54

Day marker poles Tube (frangible, fiberglass) Wind cone shaft

Question 57

What are the dimensions of the day panel marker?

Answer 57

20” x 72”

Question 60

What is in pouch #1?

Answer 60

Lights

Question 62

What is in pouch #6?

Answer 62

Tools

Question 63

What are the two pack and configurations for the L – 204?

Answer 63

Deployed Bag | ILBE(improved load bearing equipment) pack

Question 66

What is the purpose of the L-123?

Answer 66

It is used to provide adequate, portable visual landing aids at Remote sites

Question 67

What are the components of the L – 204?

Answer 67

VIPIR Light Universal mounting base Remote control receiver Remote control transmitter