Limitations Flashcards
(47 cards)
What is the minimum transient rotor limit?
91%
This is the minimum percentage for rotor transient operation.
What is the normal operational range for rotor speed?
97-101%
This range indicates the typical rotor speed during normal operations.
What is the maximum transient rotor power on percentage?
106%
This percentage indicates the limit during maximum transient conditions.
What is the maximum rotor speed during autorotation?
108%
This percentage indicates the limit during autorotation conditions.
What is the maximum transient rotor limit?
111%
This indicates the highest rotor speed allowed for transient conditions.
What is the maximum torque for dual engine operation?
100%
This is the maximum torque allowed when both engines are operating.
What is the maximum torque for single engine operation?
123%
This is the maximum torque allowed when operating on a single engine.
What is the fuel flow at 100% torque?
2000 PPH
PPH refers to pounds per hour of fuel flow.
What is the minimum trans oil pressure at ground idle?
7 PSI
This is the lowest acceptable pressure for transmission oil at idle.
What is the minimum trans oil pressure at 100% RRPM?
20 PSI
This pressure is necessary for safe operation at maximum rotor RPM.
What is the normal operating range for trans oil pressure?
20-90 PSI
This range indicates safe operational pressure levels.
What is the continuous operation range for PTIT?
400-815
PTIT refers to the gas temperature in the turbine inlet.
What is the maximum PTIT for 30 minutes?
854
This temperature is the limit for short-term operation.
What is the maximum PTIT for 10 minutes?
899
This temperature is the limit for brief operation.
What is the maximum PTIT for 2.5 minutes?
932
This indicates the highest allowable temperature for very short durations.
What is the maximum PTIT for 12 seconds?
943
This is the absolute maximum temperature limit for the shortest operational period.
What is the minimum hydraulic pressure?
2500 PSI
This is the lowest acceptable hydraulic pressure for operation.
What is the normal operating range for hydraulic pressure?
2500-3200 PSI
This indicates the safe pressure range for hydraulic systems.
What is the maximum hydraulic pressure?
3200 PSI
This is the upper limit for hydraulic pressure.
What is the maximum transmission oil temperature?
140*
This is the highest allowable temperature for transmission oil.
What is the minimum N1 (NG) at ground idle?
50%
N1 refers to the speed of the gas generator section of the engine.
What is the maximum N1 (NG)?
111%
This indicates the highest allowable speed for the gas generator.
What is the maximum hydraulic temperature?
120*
This indicates the highest operational temperature for hydraulic fluid.
What is the caution range for hydraulic temperature?
95-120*
This range indicates temperatures that require monitoring.