Midterm Flashcards
The System International d’ Unites (SI) uses standard prefixes.
True or False.
The System International d’ Unites (SI) uses standard prefixes.
True
Which unit is not an SI unit?
a. Liter
b. Gram
c. Meter
d. Pound
Which unit is not an SI unit?
d. Pound
Distilled water is water produced by…
a. ion exchange purification
b. reverse osmosis
c. UV sterilization
d. Distillation
Distilled water is water produced by…
d. Distillation
A substance dissolved in a liquid is…
a. a solvent
b. a solute
c. a solution
d. an acid
A substance dissolved in a liquid is…
b. a solute
A percent solution is expressed as…
a. the amount of solute per 100 total units of solution
b. the number of moles per 1 liter of solution
c. the amount of solute per kg of solvent
A percent solution is expressed as…
a. the amount of solute per 100 total units of solution
The expression which mathematically represents the dissociation of weak acids and bases is known as…
a. resistivity
b. oxidation-reduction potential
c. the Henderson-Hasselbalch equation
The expression which mathematically represents the dissociation of weak acids and bases is known as…
c. the Henderson-Hasselbalch equation
If a thermometer used in a clinical laboratory is calibrated, it’s not necessary to record the temperatures for quality assurances purposes.
True or False
If a thermometer used in a clinical laboratory is calibrated, it’s not necessary to record the temperatures for quality assurances purposes.
True
Pipets are devices used to transfer volumes of liquids. Which device is not a pipet?
a. pasteur pipet
b. serological pipet
c. volumetric pipet
d. erlenmyer pipet
e. automatic pipet
Pipets are devices used to transfer volumes of liquids. Which device is not a pipet?
d. erlenmyer pipet
Which item is not true about centrifuges used in a clinical laboratory?
a. centrifuges need to be cleaned regularly
b. refrigerated centrifuges need to have their temperatures checked periodically
c. the RPM indicator on the centrifuge always indicates the correct RPMs
d. the centrifuge cover should remain closed until the centrifuge stops operating
Which item is not true about centrifuges used in a clinical laboratory?
c. the RPM indicator on the centrifuge always indicates the correct RPMs
How many grams of NaOH are required to make 1 liter of a 10% NaOH (w/v) solution?
a. 110 grams
b. 200 grams
c. 10 grams
d. 100 grams
How many grams of NaOH are required to make 1 liter of a 10% NaOH (w/v) solution?
d. 100 grams
If a patient’s glucose is assayed and reported to be 1000 mg/dL and it’s diluted 1:4, what should be the reanalyzed value?
a. 200 mg/dL
b. 250 mg/dL
c. 500 mg/dL
d. 100 mg/dL
If a patient’s glucose is assayed and reported to be 1000 mg/dL and it’s diluted 1:4, what should be the reanalyzed value?
b. 250 mg/dL
Beer’s Law describes the relationship between the concentration of a solution and the solution’s absorbance in many photometric determinations.
True or False
Beer’s Law describes the relationship between the concentration of a solution and the solution’s absorbance in many photometric determinations.
True
The needle gauge with the largest lumen is…
a. 18
b. 16
c. 21
The needle gauge with the largest lumen is…
b. 16
The purpose of the OSHA Hazard Communication, General Industry Safety Standard, 29 CFR 1910.1200 is to require employers to establish a program ensuring personnel are provided with information regarding the workplace dangers of…
a. blood borne pathogens
b. environment hazards
c. general safety hazards
d. hazardous chemicals
The purpose of the OSHA Hazard Communication, General Industry Safety Standard, 29 CFR 1910.1200 is to require employers to establish a program ensuring personnel are provided with information regarding the workplace dangers of…
d. hazardous chemicals
Labels on shipped chemicals from manufacturers, importer or distributors are required to include information on (section 8, q.42)?
a. physical properties of the chemical
b. accident instructions
c. appropriate hazard warnings
d. exposure limits
Labels on shipped chemicals from manufacturers, importer or distributors are required to include information on (section 8, q.42)?
c. appropriate hazard warnings