Module #4: Apparatus Maintenance

Question 1

When should an Apparatus Pre-Check be performed?

Answer 1

Change of Relief and After each INCIDENT when the apparatus or equipment is used.

Question 2

The DRIVE BELTS shall be called into the shops if they have a ____ in. or more Deflection midway between the pulleys.

Answer 2

1/2 in.

Question 3

What do you have to do PRIOR to checking the Drive Line?

Answer 3

Chock one or more wheels and release ALL brakes.

Question 4

Drive Line Check:

Take hold of the shaft as close to the END as possible, with both hands, try to move the shaft UP and DOWN. Repeat at the other end of shaft. This test will show if there are any loose _________ __________.

Answer 4

Pinion Bearings

Question 5

When checking the Steering Gear and Connections, Have an assistant move the wheel back and forth in short, fast motions approx. ____ to ____ inches.

Answer 5

6 to 8 inches

Question 6

When is the Tread Depth checked and at less than what depth should they be reported?

Answer 6

Bi-Monthly F-377

1/8” or 4/32”

Question 7

Air Reservoir Tanks: (Weekly)

After draining all Tanks withe system at Maximum Pressure, check all Drain Cocks with ____ and _____ for leak.

Answer 7

Soap and Suds

Question 8

How often shall the Oil Filter be changed on Heavy Apparatus?

Answer 8

every 12 months