Brainscape's Knowledge GenomeTM

Browse over 1 million classes created by top students, professors, publishers, and experts.


See full index

MT TECH-ALL⭐️ > MY FCPX > Flashcards

MY FCPX Flashcards

1
Q

How do you control the volume in a clip or a range of clips?🟩

A

Select a clip or a group of clips in the timeline Hold down CTL and tap -/_ to lower volume by one decibel Hold down CTL and tap =/+ to bring the levels up. (I have not yet done this)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

How do you use proxy video to edit?🟩

A

In the EVENT VIEWER , Click on the VIEW menu. Under “media playback”, You’ll have three choices number 1. optimize/original. 2. Proxy preferred. 3. proxy only. Click on #3. Proxy onlookers

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

What is the red box that appears in the right side of the viewer and how do you get rid of it?✅

A

The red box appears when you are zoomed into an image in the viewer It acts as a positioning control to move about the image. Drag inside the box to change the portion of the image displayed in the viewer. To remove the red box, type SHIFT + Z. Or click the percent menu at the top right corner of the viewer and change the percentage to “fit”.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

What are the advantages of proxy media?✅

A

A free utility, built into Final Cut, that increases performance, decreases storage bandwidth, speeds rendering, and gives you control over image quality. All at the click of a single button.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

What does a purple line mean in the browser?🧿

A

A purple line indicates that a clip or range has one or moreanalysis keywords.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

How do you launch a WD EXTERNAL drive for FCXP?🟩 From dionn youtube “Run final cut pro from an external hard drive and move projects, events and library 2021” is

A

Go back to fcxp Open a library. YOU ARE GOING TO CREATE A NEW LIBRARY THAT WILL BE STORED ON YOUR EXTERNAL HARD DRIVE. -go to menu bar > file >new>library CHOOSE A DESTINATION FOR THE NEW LIBRARY -on the left hand side of the box that popped up, click on the external drive. -in “save as” take care not to change “fcpx bundle”. I don’t have that for purmort❌press save

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

How do I make an APPEND EDIT? 🧿 Plus three other ways

A

PRESS E Or Choose edit>append to storyline MY WAY: Or click the APPEND BUTTON in top-left corner of timeline Or Drag and drop.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

What is the shortcut command to OPEN THE EXPORT WINDOW?✅

A

COMMAND + E

Or — file > share?? Also Master copy? Proxy video?

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

What does a colored line mean in the browser?🟩

A

To help you see if a clip is marked as favorite or rejected, have keywords applied or are being used in the current project.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

When you don’t see the film strip icon in the right corner of the timeline, what do you?🧿

A

Click on the green dot - go full screen.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

How do you add an effect?

A

Upper right of project window The boxes. Just to the left of the transition icon Drag the effect on to the clip. If do you want to do more you can go into the inspector window or you’ll see the effects properties

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

How do you apply a text Tool? 🟩 And then change the words?

A

Choose tool. Drag to timeline. Just above video Drag to right to lengthen To change the text, double click on the text in the viewer. Then change the words in the browser

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

🤔🤔🤔 CARDS ABOVE THIS ONE

A

SOLUTIONS TO CRAP THAT CONFOUNDED ME

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

What are the two shortcuts to go from the end to the start of a clip? (Not a range)🧿

A

; and ‘

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

What does the range tool do and how do you activate it?

A

The range tool lets you select a section of your timeline: part of a single clip, a range of multiple clips, just video, or just audio.

To activate it, pressing the R key on the keypad, or press and hold the R key, When you release the key, Final Cut reverts back automatically to the arrow too

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

Shortcut to get blade

A

B

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

How do you see background tasks, like importing media?✅

A

Windows > background tasks or cmnd 9 Or you can hit the background tasks button in the toolbar. It’s a checkmark in a circle - next to the key - next to the red-yellow-green buttons

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

What does the ripple tool do?❌

A

The ripple tool allows you to change one side of an edit point. This is the tool to use when you need to adjust the timing of one shot without making any changes to the other shop. For instance, if you were cutting from a wide shot of someone week walking up to a door to a tight shot of them walking through the door you would use the ripple tool to make sure the actors position matches between the out and the in SHORTCUT - rr

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

In fcpx, what does “destination”mean?🟩

A

Final Cut Pro provides a variety of preconfigured export settings, called destinations, that you can use to output your project or clip. For example, you can export a project

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

How do you move forward and backward one frame at a time?🧿

A

comma , Period .

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q

How do you export - NOT the shortcut.✅

A

File > share > Master file is highest quality

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q

How do you add a keyword to a clip or range?✅

A

Click the keywords button in the toolbar at the top of the keyword editor type the word or keyword phrase you want to apply to the selection, then press return

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
23
Q

Why can’t I hear a wav file in FCPX?🟩

A

Click on the box in the browser - not on the listing

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
24
Q

RIGHT CLICK on a macbook?🧿

A

CTL while tapping trackpad

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
25
Q

How do you export proxy media?🟩j

A

You Will need to go to your preferences in FCPX and click “Use Original or Optimized Media”. This should “re-connect’ your timeline edit to the original files for best quality. If you leave it on Proxy, your export will be scaled in bitrate and size from the proxy media. After you’ve done this, you can Export a master Quicktime movie with any version of ProRes that you want, including HQ. Depending on how you imported your files, sometimes checking the “Use Original or Optimized Media” button in preferences won’t reconnect your media. Usually if you use FCPX to create Proxy files, it will know where the original media lives and reconnect to it. However, if you made proxy files via another application and imported them directly, in this case, you would need to manually reconnect your Event files to the original media.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
26
Q

How do you add audio keyframes?✅

A

Right click on clip STEP 1: right click on clip > show audio animation”. Or press CTL A STEP 2: Press OPTION - K STEP 3: OR (or is it “and”) Use the range selection took, which is: hold down the R Key and drag it where the keyframe should it should begin and wns.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
27
Q

How do you launch a WD EXTERNAL drive for FCXP?🟩 From dionn youtube “Run final cut pro from an external hard drive and move projects, events and library 2021”

A

Go back to fcxp Open a library. YOU ARE GOING TO CREATE A NEW LIBRARY THAT WILL BE STORED ON YOUR EXTERNAL HARD DRIVE. -go to menu bar > file >new>library CHOOSE A DESTINATION FOR THE NEW LIBRARY -on the left hand side of the box that popped up, click on the external drive. -in “save as” take care not to change “fcpx bundle”. I don’t have that for purmort❌press save

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
28
Q

What’s the difference between a range and a clip?🧿

A

A clip is a piece of video I shot A range is the part of the clip I want to use. Put another way I’ll range is a subset of a clip

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
29
Q

How do you undo the last action? ✅

A

CMND -Z

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
30
Q

What does an orange line mean in the browser?🧿

A

And orange line along the bottom of an event clip indicates that the clip is being used in the project currently open in the timeline.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
31
Q

WD DRIVE #3 How do you import video to your External drive?

A
  1. Close the inspector window 2. “Create new event in” = external library. And name the event. (Purmoort tesf) 3. Files = “copy to library”
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
32
Q

How do you delete a clip without deleting clips that are connected to it?✅

A

Two ways Hold down the ~ key while deleting Or Option - cmnd - delete

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
33
Q

How do you add a keyword to a clip or range?✅

A

Click the keywords button in the toolbar at the top of the keyword editor type the word or keyword phrase you want to apply to the selection, then press return

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
34
Q

How do you enable or disable loop playback🤔

A

CMND L

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
35
Q

🔽🔽🔽🔽

A

UNSORTED BELOW

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
36
Q

What is the BROWSER WINDOW?

A

It works hand-in-hand with the sidebar to the left The sidebar shows all libraries, events, folders and collections. BIG CLUE: THERE ARE ADDITIONAL SIDEBARS FOR PHOTOS, AUDIO FILES, TITLES AND GENERATORS

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
37
Q

SHORTCUT- REMOVE A RANGE IN A CLIP🧿

A

Option + click

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
38
Q

What is the EVENT VIEWER❌

A

The viewer is next to the browser either when skimmed or played

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
39
Q

When you create a project with different formats…✅

A

adjust the settings when you create your PROJECT. MBDc But how

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
40
Q

How do you TRANSCODE MEDIA AFTER it has been imported?🧿

A

Click on clip in the (browser list) or all the clips on a timeline (not sure about this - And the go to file > transcode media

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
41
Q

What is proxy media?✅

A

Proxy media is always Apple ProRes 422 Proxy. Proxy media creates a reasonably high-quality media file, but at about 1/4 the size of ProRes 422.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
42
Q

What is an analysis keyword?🟩

A

I don’t understand this. “If you analyze media to find people, analysis keywords – such as one person, close-up shot, and so on end are automatically added to clips or clip ranges. Clips or ranges with analysis keywords are marked with a purple line in the browser. “Marks From support.apple.com

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
43
Q

how do you IMPORT VIDEO 🟩FROM AN SD CARD TO AN EXTERNAL DRIVE?

A

?? 1. Open FCPX 2. Create a new library (new-library) ??WHY DON’T I SEE FCPX BUNDLE?? 3. Choose destination (e.g. “WD EXTERNAL”) 4. Look for “library properties” on the right —-if you don’t see it, go to file>library properties 5.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
44
Q

How do you do ctl - alt - delete on a Mac? 🟩

A

Apple symbol ?+ option + esc

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
45
Q

How you delete a clip in a track without having the rest of the timeline jump forward?

A

Hold down the Grave Accent (`) key while pressing the Delete key

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
46
Q

How do you view keywords in the skimmer info window?🧿

A

Shortcut: control y Or choose view > browser > “skimmer info” *** might have to activate the skimmer, Shortcut “s”, to get the skimmer to show up. The red line “ skim the clip in the browser” “Keywords, including analysis keywords, or displayed in the skimmer info window when you hold the pointer over the clip

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
47
Q

SHORTCUT FOR CROSS DISSOLVE ✅

A

Highlight the two clips and hit: cmnd + T

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
48
Q

What is proxy media?✅

A

Proxy media or smaller low resolution versions that serve as a substitute for the original camera media when your computer is not powerful enough to smoothly handle high resolution material or demanding codecs

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
49
Q

SHORTCUT TO UNDO AN EDIT🧿

A

Command z

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
50
Q

How does Will Chudlow recommend libraries be organized?✅

A

Create a library for project. Not a project in the way to that Apple uses the term. But project in the sense that you’re taking on a new initiative, a new undertaking or taking a new video.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
51
Q

🧿🧿🧿

A

CONFIRMED AND CRITICAL - STUFF I MUST KNOW

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
52
Q

How do you lock the video track so you can change the audio track? Or vice versa?🟩

A

You can’t in FCPX. Separate the two by clicking on the clip And then going to “CLIP” in the menu bar. Then, highlight the track you want to change and the blade to cut.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
53
Q

Shortcut for AUDIO CROSSFADE?🧿

A

Option T

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
54
Q

❌❌❌

A

PROBLEMS I AM WRESTLING WITH NOW

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
55
Q

How do I control what I see while working with FCPX.🧿

A

WIndow>show in workspace

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
56
Q

What can you do when video frames are dropped?

A

Use proxy play by changing the media setting to proxy in the viewer options pop-up menu

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
57
Q

How do you create a compound clip in fcpx?✅

A

Select one or more clips And then, three options:

FILE > NEW COMPOUND CLIP

PRESS OPTION G

CTL click the selection and choose new compound clip.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
58
Q

What is a ripple trim?🟩

A

The default trim in FCPX. It’s called a ripple trim because when you trim a clip it, along with all the other clips ripple after you change the clip’s duration.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
59
Q

What is the FCPX smart collection?🟩

A

It makes finding stuff easier. The smart collection displays: -All video from the library -All audio -Favorites (cljps I have marked as favorites) -Projects. (All of the projects in the library regardless of which event they are in) Stills

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
60
Q

How do you create a custom ✅command. In this case, a option c for a cross fade FROM CODY WANNER YOUTUBE VIDEO. BUT WHY WOULD YOU CREATE OPTION C - WHEN FCPX ALREADY OFFERS A SHORTCUT FOR A CROSSFADE — OPTION T

A
  1. Fcpx in the menu bar. 1.5 - click on commands 2 Click on customize 3 Top left clock on the drop down that says “default”. Change it to “duplicate. 4. Name it. I titled it “JFR commands” 5. In the search box enter “cross” 6. On the keyboard that is displayed, Click on “c” 7. And then click on crossfade and slide it to the “option” modifier. 8. Hit save and close
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
61
Q

What does the key symbol mean🧿

A

It is the keyword editor icon

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
62
Q

How do you set up an external drive as the source for a FCPX project?🟩

A

Will Chudlow: New > Library > (location)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
63
Q

How do you get rate a clip (get a red mark or green mark)?✅

A

F key for favorite OR “mark > favorite” delete key to reject OR press “mark>reject”

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
64
Q
A
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
65
Q

What is an analysis keyword?🟩

A

I don’t understand this. “If you analyze media to find people, analysis keywords – such as one person, close-up shot, and so on end are automatically added to clips or clip ranges. Clips or ranges with analysis keywords are marked with a purple line in the browser. “Marks From support.apple.com

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
66
Q

MORE - WD DRIVE #2- SET LIBRARY PROPERTIES✅

A

-If you dont already see it, go to file and click on “library properties. -go to modify settings. To the right of “storage locations on the right. (I have trouble seeing it. Not sure how I fixed it) Media = in library Motion content=in motions template folder Cache=in library Backups=final cut back up

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
67
Q

How do you enter a keyword with a clip or range?🧿

A

Click on the key icon upper left

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
68
Q

How do you add only the video or only the audio to the timeline?✅

A

Down arrow next to the four monitors

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
69
Q

What is native media and when should you use it?✅

A

Native media is the format shot by your camera. For example, AVCHD, H.264, DV, and HDV are all examples of native media formats.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
70
Q

How do I find a project?✅

A

Top of library sidebar

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
71
Q

How do you prep a WD DRIVE for FCPX🟩 From dion - saved to youtube fcpx folder

A

Get to disk utility -from macbook (not fcpx) click on magnifying glass and enter disk utility. -click on external drive (WD_EXTERNAL) -

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
72
Q

How do you mark a clip as a “favorite” or “reject”🧿

A

Click on Mark on the menu bar Or Shortcut: Favorite - F reject - delete

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
73
Q

How do you prep a WD DRIVE for FCPX✅ From dion - saved to youtube fcpx folder

A

Get to disk utility -from macbook (not fcpx) click on magnifying glass and enter disk utility. -click on external drive (WD_EXTERNAL) -click on erase. Change the name. Format=mac os extended (journaled). Press erase. THE DRIVE IS NOW FORMATTED AND READY

74
Q

How do you turn off the magnetic timeline?🟩

A

Use the shortcut — hit P Or by setting the keyboard to “position” Pressing the FN when deleting a clip will then leave an empty space in place of removed clip rather than replacing it with another.

75
Q

What is optimized media and when should you use it?✅

A

Optimized media is always ProRes 422. When the “Optimize Media” checkbox is checked during import, FCP X transcodes, which is a fancy way of saying it “converts,” your media from its native format into Apple ProRes 422.

76
Q

What does a green line in the browser mean?✅

A

A green line indicates that a clip or range has been marked as a favorite.

77
Q

What do you need to remember about sharing proxy media?

A

If you use proxy media for playback, make sure to switch back to optimized/original media before sharing your project. This ensures the highest quality in the exported file. See Intro to sharing projects in Final Cut Pro.

78
Q

Name three things you can do to change the interface✅

A

Toggles See screenshot of shortcuts Larry Jordan FCP X change the interface Drags -drag the vertical edge between the library list and the browser to change the size of the library list -same goes for the vertical edge between the browser and the viewer -NOTE: you can’t change the size of the inspector Layouts -There are three interface layouts, plus an option. All are controlled from the Windows menu.

79
Q

How do you edit from an external drove?🟩

A

-Open fcpx -New > library > location = (external drive)

80
Q

What is the shortcut to get to the end of the range of clip in the browser🧿

A

Shift O

81
Q

How do you go to the start of a range set in a clip in the browser?🧿

A

shift i

82
Q

Name three things you can do to change the interface✅

A

Toggles —See screenshot of shortcuts Larry Jordan FCP X change the interface Drags -drag the vertical edge between the library list and the browser to change the size of the library list -same goes for the vertical edge between the browser and the viewer -NOTE: you can’t change the size of the inspector Layouts -There are three interface layouts, plus an option. All are controlled from the Windows menu.

83
Q

How do you unlink two clips that are connected on the timeline?🟩

A

Right click on the clip > Lift from storyline

84
Q

How do you lengthen the timeline?🧿

A

Films strip icon in upper right of timeline

85
Q

How do you get out of the timeline index?🟩

A

Back arrow in the top bar of timeline index just to the Left of the name. And then go to windows and get rid of the index.

86
Q

How do you disable a clip in the timeline?

A

Select one or more clips in the timeline, then:

V

Or

Choose “Clip” in the menu bar > Disable

Disabled clips are dimmed in the timeline and are invisible and silent during playback.

87
Q

What does a purple line mean in the browser?🧿

A

A purple line indicates that a clip or range has one or more analysis keywords.

88
Q

What do you do when the video in the viewer is small?🧿

A

Shift Z

89
Q

How do you perform a ripple trim?🟩

A

“Select tool” (blue pointer) When you get to the start or the end of the clip, the pointer will turn into a trim Icon.

90
Q

How do you find the source time code or a clip?✅

A

Look under top bar menu item: “Window” and then “Project timecode” Or “Source timecode”

91
Q

Shortcut to make a bladecut on the timeline.✅

A

CMND + b (lower case)

92
Q

💩💩💩

A

NO LONGER IMPORTANT

93
Q

How do you replace a clip with a gap?

A

Edit - replace with gap

Or

Shift + delete

94
Q

How do you prep a WD DRIVE for FCPX🟩 From dion - saved to youtube fcpx folder

A

Get to disk utility -from macbook (not fcpx) click on magnifying glass and enter disk utility. -click on external drive (WD_EXTERNAL) -

95
Q

How do you convert media after importing the files?✅

A

Simply select the clips in the Event Browser that you want to transcode and select File > Transcode media. Then you have three choices: -If nothing is checked. Final Cut imports the media and edits it in camera native format. This generally provides the greatest savings in storage space, but often requires faster computers to avoid a performance hit. -If optimize is checked. Final Cut converts the camera native format into ProRes 422. This provides the best possible performance and image quality, but requires additional storage space (roughly 60 GB per hour of material). - If proxy is checked. Final Cut converts the camera native format into ProRes 422 Proxy. This provides much better performance than editing camera native with reasonable image quality, while requiring less storage space than ProRes 422 (roughly 18 GB per hour of material).

96
Q

How do you see what’s going ✅on with the audio between two clips?

A

Click on both clips Right click Choose “expand audio components”

97
Q

What does a green line in the browser mean?✅

A

A green line indicates that a clip or range has been marked as a favorite.

98
Q

What is the skimmer?✅

A

Vertical orange line that shows where the blade is. To activate it hit S?

99
Q

What are the four key parameters of camera native files?✅

A

-codec -frame size -frame rate -scanning - progressive or interlace

100
Q

What is a roll edit?✅

A

A roll edit allows you to change the end point of one clip and the beginning of another.

101
Q

RESET TIMELINE✅ How do you reset the timeline so you can see about 80 percent of it?

A

Shift Z

102
Q

What does a red line indicate in the browser?✅

A

A red line indicates to the clip or range has been marked as rejected

103
Q

What is the difference between a ripple edit and a roll edit? ✅

A

A ripple always affects the duration of your timeline. A rule never affected. A ripple only change is one side of the unit point. A roll changes both sides

104
Q

📍📍📍📍

A

IMPORTANT NOW

105
Q

How do you delete a range of clips in the timeline?✅

A

Click on the arrow next to the monitor icons in the timeline Click on the range tool And drag across the range you want to delete And hit the delete key.

106
Q

What does the roll tool do?❌

A

The roll tool allows you to simultaneously change both the out and the in so that you can adjust the timing of the edit point Shortcut r

107
Q

Where is the text tool🟩

A

Far upper left in browser. Buttons for video (time clapper), Music (notes) Text (T)

108
Q

What are the two ways to UNDO A COMPOUND CLIP?✅

A

Shortcut: ⬆️(shift) ➕CMND ➕G Or: Click on CLIP in top bar “Break apart clip items”

109
Q

❌❌❌❌I AM SO LOST WHEN IT COMES TO NAVIGATING BETWEEN THE FUNCTIONS AVAILABLE BETWEEN THE EVENT VIEWER AND THE BROWAEE❌❌❌❌

A

❌❌

110
Q

What does “transcode” mean?✅

A

Convert.

111
Q

What is a codec?✅

A

Codecs are also referred to as video formats, though that is a less precise term as “video formats” can also include elements outside the codec such as image size or frame rate b Some codecs are optimized for small file sizes others for image quality still others for effects processing

112
Q

What are the three media types for FCPX✅

A

-native, optimized, and proxy.

113
Q

Cody Wanner’s recommended workflow for crossfades.🟩

A

Apply crossfades to all clips with audio — Highlight all of clips - hit option T

114
Q

What does a blue line in the browser mean?✅

A

Blue means a keyword has been manually applied or that a keyword Or keywords were imported with the media file

115
Q

SPLIT THE AUDIO TRACK FROM THE VIDEO TRACK in a project🧿

A

MY WAY: is Right click on clip in menu bar> break apart clip items Or CMND - SHIFT - G

116
Q

What do you do when you have a 🟩range that shows up too thinly in the browser to drag and drop to the timeline?

A

There has to be a better way… What I did temporarily was set the range and then go to “edit” and then “insert”.

117
Q

Shortcut to get select tool (pointer)✅

A

A

118
Q

When you lose library 🟩preferences when setting up an external hard drive, what is the remedy?

A

Click on the library you are working with on the left

119
Q

shortcut for INSERT EDIT🧿 plus two other ways to make an insert edit

A

Position the playhead - Use the insert button Or: Press W Drag and drop

120
Q

When performing A ripple edit, 🟩how do you fix it so that the only part that remains is the part you selected?🟩

A

Edit > trim to selection ***i think i was missing this concept

121
Q

How do you get the red box to go away?✅

A

The red box shows what part of the frame you are seeing. To get rid of it, and it is in the viewer, make the viewer active by clicking in the pane once and use: Shift - Z

122
Q

How do you play video in the ✅viewer (from the timeline) at half speed?

A

Press and hold down the K key While holding down the L key

123
Q

What is a clip?🧿

A

A raw piece of video shot from when I hit record play Not to be confused with a range, which is part of the clip.

124
Q

How do you find a project?🧿

A

On the upper left, open “smart collection.” It will be listed with a gear symbol

125
Q

When the inspector window is cut off on the right side, what is the remedy?

A

Click on the green button; move the entire interface. (Cris Sandu 7.3.2021)

126
Q

If the “optimize” option is grayed out, what does that mean?🟩

A

Not all camera formats require optimizing. If the Optimize option is grayed out, it means that the camera format is already optimized and would not benefit if converted into ProRes 422. (DV and AVC-Intra are two examples of already-optimized media formats.)

127
Q

How do you extend the video over the start of the next clip without changing the audio

A

❌❌❌

128
Q

How do you turn snapping (the magnetic timeline) on and off?✅

A

Shortcut: Hit the N key Or: MY WAY: Click on the snapping icon in the upper right corner of the timeline window. (Two rectangles with three little lines above and below it).

129
Q

What does a blue line in the browser mean?✅

A

Blue means a keyword has been manually applied or that a keyword Or keywords were imported with the media file

130
Q

How do you get rate a clip (get a red mark or green mark)?✅

A

F key for favorite OR “mark > favorite” delete key to reject OR press “mark>reject”

131
Q

When you have identified🤔favorites in a clip and marked them with keywords - AND YOU HAVE NOW LOST THE ORIGINAL CLIPS (ALL YOU SEE IS FAVORITES) what do you do!

A

On the top right side of the browser, in the browser, to the left of the dimensions, magnifying glass, filmstrip and toggle, SWITCH FROM FAVORITES TO UNUSED. IMPORTANT: IF YOU DON’T SEE THAT BAR, CLICK ON THE GREEN DOT

132
Q

After editing your piece using proxy video, how do you export in high quality.🧿

A

I’m not sure about this I think it is easy —goi back and switch on optimize/original in the view menu on the event you

133
Q

How do you title (or name) a clip in the timeline?

A

File > New> Compound clip.

I don’t know if htat’s the official way, but it appears to work.

7.22.2021

134
Q

How do you cut connected clips on the timeline at the same time?🟩

A

Trim > blade al??

135
Q

How do you sync an audio and video clip?

A

Amazingly easy.

Just click on the two clips.

Then, go up to “Clip” in the top menu bar and choose “synchronize clips” from the drop down menu.

On 07.20.21, I took two different video clips and THEY APPEAR TO HAVE BEEN TURNED INTO A SINGLE CLIP with the good audio from the HN1.

136
Q

What is a “nested clip”?

A

Collapsing an entire edited sequence into a single “virtual clip.”

137
Q

How you “un-favorite”’a clip?

A

Select the green line and press U for unrate.

138
Q

What is the index? Looks like a project/timeline?

A

Easy way to look up your video and elements by type. Useful for a big project. Not relevant to me now.

139
Q

How do i switch the browser, when it displays a video strip and the slugs of my clips, to just one long video strip?

A

Click on the icon that looks like a clipped piece of film above the upper right corner of the browser.

140
Q

What do you do when you FCPX wont let you change the time and width of the filmstrip display in the browser?

A

Click in the icon to the left of the filmstrip in the upper right corner. Looks like film cut in two

141
Q

What does the cut filmstrip icon change to i the upper right of the browser change to when you click on it?

A

A rectangle with three lines

142
Q

How do you clear a range in a clip?

A

Option - click

143
Q

How do you copy/paste a project?

A

You don’t have to -In the library’s side bar select the event that contains the project. In the browser so like the project you want to company (select the date, that’s how I am still naming events, and then look on the window that opens up, and look at projects” Choose edit > snapshot project The duplicate project appears in the browser with the word “mark snapshot foot mark and the date and time appended to the project name

144
Q

How do you fade to black?

A

Use fade to color, which defaults to black.

145
Q

How do I see properties of a mov file

A

Right click on the file (control -click) Click on “get info”

146
Q

What do you do when you get an error message on a flashdrive that says the file you are trying to transfer is “too large for the volume’s format”?

A

Run “Disk Utility” on Mac. Select your flash drive, displayed on the left side. Click on the “Erase” tab. The hard drive erasing tab will pop up. “Set a name and the GUID Partition Map will pop up.” (I did not do this) Choose “ExFAT” from the dropdown menu for the format, and name your drive Click “Erase”

147
Q

What is a video codec?

A

The codec (or coder-decoder) is the software that compresses and decompresses the video and audio data housed in a container. This reduces file sizes, making footage much easier to work with. Simply put, without compression, one hour of HD footage could easily fill a hard drive. Each codec will compress footage differently, so the best choice will depend entirely on what the content creator wants to preserve

148
Q

What is a file format?

A

The container such as .mov, .avi, and .mp4. These file types function as a sort of “box” that “contains” the video, audio, and metadata (that’s the extra info attached to each file, like file names, tags, codec info, etc.), allowing it to function as a single file

149
Q

How do you create proxy media?

A
  1. Control-click one or more clips in the Final Cut Pro browser, then choose Transcode Media.
  2. In the window that appears, select the “Create optimized media” checkbox, the “Create proxy media” checkbox, or both, then click OK.
150
Q

Do markers carry over from a clip to a syncronized clip?

A

???

Yes. But apparently only when the clip is displayed in the timeline. When i did this on 3.6.2022, with barlow (I had started using markers to before I synced, i saw the markers in the synced clip, but not in the browserl.

151
Q

How do you turn off the camera mic when you sync video?

A

Before you sync, click on the box that says, “Disable audio components on AV clips.” If you forget to do so, re-sync. Clips sync quickly.

152
Q

How do you modify a project’s settings?

A

select the project you want to modify by double clicking it.

make sure the inspector is visible by clicking on the three lines in upper left corner, that look sliders (opens inspector)

click on modify - the modify settings window will appear in the center of the screen

make your changes and click ‘okay’’

pFS 7

153
Q

What video format do you typically choose for a good quality YouTube video?

A

1080p HD,

according to PFS 7

154
Q

How do you apply crumblepop face blur?

A

Drag effect over clip Size and move box over face Hit track

155
Q

When customizing a project’s video settings, what are the titles of the three dropdown boxes?

A

Format

Resolution

Rate

156
Q

What is “resolution”?

A

The size of the frame in pixels.

It is generally a 16 x 9 ratio.

PFS 7

157
Q

What is frame rate?

A

The number of frames that are shown in 1 second of footage.

pfs7

158
Q

How do you customize a project’s color space”?

A

Go back to the drop down menu for Video: Format and choose “custom,:

in the color space drop down, you’ll get the recommended settings for the video format you chose.

but generally, keep the auto setting

PFS 7

159
Q

What are common audio settings, and what are the advantages and disadvantages to going with a small file size?

A

32kHz

  1. 1kHz
  2. 2kHz

96kHZ

176.4HZ

192khz

Small sample rate will produce poorer quality audio with the advantage of smaller file size

pfs 7

160
Q

FCXP has a feature that backs up your library every 15 minutes.

How do you get to it?

A

Go to file > open library > “from backup”

You can also access the backups by going to the finder and clicking on the movies tab on the left. then, “final cut pro backups.”

PFS 8

161
Q

What’s the shortcut for quitting FCPX?

A

CMND-Q

162
Q

How do you duplicate a project?

A

edit>duplicate project

or use the shortcut

cmd-d

pfs 10

163
Q

How do you select multiple clips in the timeline and the browser?

A

Press cmnd while clicking on the clips,

This also works to deselect clips,

pfs 10

164
Q

How do you select a range in the timeline?

A

Two ways:

Use the tools dropdown menu in the timeline (down carrot next to arrow), click on range selection.

Or shortcut = R

This is a thing because if you were to try to drag the mouse over the clip in the timeline, you might move the entire clip

You will know you have the range on when you see the range icon on (kinda looks like a battery with two positive ends

PFS 13

165
Q

What do you call a clip that’s atop another clip in the timeline?

A

A connected clip.

PFS 14

166
Q

What happens when you drag a clip from the finder into the timeline?

A

The clip is automatically added to the library.

I have note done this. I’m adding this as a flashcard to be mindful of it,

PFS 14

167
Q

When should you use an audio crossfade?

A

Always, according to Chad with Creative Video Tips.

YouTube video saved to recruitment video bookmark collection on idoc laptop

168
Q

What causes the clip sound with audio?

A

Audio is wave forms that go up and down. When you make an edit when the audio wave form is high on one clip and the other is low, you get that clicking sound.

169
Q

How do you do an audio crossfade?

A

Option T

170
Q

If you don’t remember the shortcut for an audio crossfade, where do look to see it?

A

Menu > modify > adjust audio fades > apply audio fade (or you can remove)

171
Q

What are the four types of audio crossfades or fade shapes and how do they work?

A

Linear. it will maintain a constant rate of change over the fade.

S-curve will ease in and out of the fade

+3db will start quickly and slowly taper off at the end, for a quick fade

-3db will start slowly and move quickly at the end,

172
Q

How do you do a crossfade?

A

Extend one clip over or under another.

then adjust the fade handles so that when the first is going down, the second is coming up.

173
Q

How do change the shape of an audio crossfade?

A

Hold control and click on the fade handle (which I think is the little round dot on the audio line.

Then you can choose one of the four options.

pfs

174
Q

How do you change the default length of a cross dissolve?

A

Change it in preferences.

175
Q

How do you change the length of a cross dissolve?

A

Drag the handles or press CTL + D and enter a value.

176
Q

How do you make your cross dissolve transition to or from black?

A

Right click on it and choose “transition to or from black.:”

177
Q

What is HFS+

A

stands for Hierarchical File System

The file system moder MacOS versions use by default.

If you want to use your USB drive on Mac devices, format USB to HFS+

cannot be read by Windows unless using third party software

178
Q

What is FAT32?

A

The File Allocation Table 32

the standard Windows file system before NFTS

it is widely recognized by almost file system.

CANNOT STORE A SINGLE FILE WHICH IS LARGER THAN 4 GB

cannot create a partition that is larger than 8 TB. (windows only recognises 2 TB)

179
Q

What is exFAT?

A

Extended File Allocation Table

Similar to FAT 32. But does not have the same limits.

Compatible with both Windows and Mac OS.

Can be used where NTFS is not feasible and you need a greater file-size limit than offered by FAT32.

Microsoft restricts its usage by license obligations.

180
Q

What’s the most important thing to do when recording a zoom call for videop

A

Activate HD Recording
Use screen capture software

MT TECH-ALL⭐️ (19 decks)

Brainscape helps you reach your goals faster, through stronger study habits.
© 2024 Bold Learning Solutions. Terms and Conditions