Brainscape's Knowledge GenomeTM

Browse over 1 million classes created by top students, professors, publishers, and experts.


See full index

ENPIEM > Myset > Flashcards

Myset Flashcards

1
Q
  1. You receive traps from your network devices and want to alert on a select message. How do you accomplish this?
    A. You cannot alert on traps through the Orion Platform
    B. Use the traps in Orion Alerts to configure the default trap alert to fire on the trap message you select to alert on.
    C. Go to the Traps view and configure a new Log Viewer rule.
    D. Configure Syslog alert actions on the Alert Action tab.
A

C

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

2.For an upcoming maintenance window, you want to ensure that alerts about affected devices do not trigger. What should you do?
A. Go to List Interfaces and deselect all the interfaces of device
B. Delete the Node. Add it back after the maintenance window
C. Unmanage the device for the duration of maintenance window
D. Nothing, this is the default Orion setting

A

C

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q
  1. You created nested maps in Network Atlas. You want the top-level map to show as down when half of the objects under it are down. How do you accomplish this?
    A. Set map status thresholds to below 50%
    B. Set map status thresholds to above 50%
    C. Set availability thresholds for devices to above 50%
    D. Set availability thresholds for devices to below 50%
A

A

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q
  1. After you create an NPM report with custom charts for availability and response time metrics, you schedule the report and add an action to export it. But you cannot export it as an Excel file. What is the likely reason.
    A. The customer charts only support a PDF export.
    B. You do not have the permissions to export the report.
    C. You must link the report with a URL in an email action to run live in the Web Console.
    D. Excel file formats are not supported.
A

C

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q
  1. How many days of data must your database contain in order to see Capacity Forecast Charts in NPM?
    A. 3 Days
    B. 1 Day
    C. 7 Days
    D. 5 Days
A

C

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q
  1. There are unexplained gaps in data collections on an NPM deployment. You find no other issues within the monitored network. What might be causing this issue? Select all that apply.
    A. Database performance issues
    B. Number of processor running
    C. Network utilization issues
    D. Orion server performance issues
A

A-B-D

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q
  1. What can you use to retrieve a single value in SNMP? Select all that apply.
    A. GET
    B. GET TABLE
    C. GET VALUE
    D. GET NEXT
A

A-D

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q
  1. Your core router is about to reboot. What should you do so that alerts about the status of devices behind the core router do not fire during the reboot?
    A. Suppress the alert if the core router is down
    B. Configure dependencies between the core router and affected devices
    C. Disable all alerts during the reboot
    D. Configure longer thresholds on the alerts
A

B

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q
  1. You want link statuses to be displayed on a map you are creating in Network Atlas. How do you accomplish this task?
    A. Edit the link line and select the appropriate router interface
    B. Drag and drop the status object on the link line
    C. Edit the router interface and enable Link Status
    D. Edit Router Status and enable the Link Status option
A

A

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q
  1. When you create a manual dependency in NPM, a group can be designated as a child object, but NOT as a parent object. Parent objects must not be a member of any group in order to be designated as a parent object.
    A. True
    B. False
A

FALSE

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q
  1. You use NPM to monitor a set of physical servers. The server team decides to virtualize these servers using Vmware. Which part of your virtual infrastructure will NPM no longer be able to monitor?
    A. Virtualization host and VM performance metrics.
    B. Virtualization host hardware health
    C. Virtualization environment tree
    D. VM Sprawl monitoring
A

D

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q
  1. The Universal Device Poller retrieves management data in which format?
    A. ANSI 1
    B. XML
    C. WMI
    D. OID
A

B

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q
  1. While manually adding a single node, it is not possible to assign Universal Device Pollers from the Add Nodes page. You can only assign Universal Device Pollers from the Universal Device Pollers application.
    A. True
    B. False
A

TRUE

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q
  1. You can apply Universal Device Pollers to which objects types? Select all the apply.
    A. Interfaces
    B. Applications
    C. Volumes
    D. Nodes
A

A-D

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q
  1. Network performance over an inter-campus Ethernet link is slow. One side of the connection is experiencing a high number of packet drops. What information in NPM can you review to help discover the cause of the issue?
    A. Possible Duplex Mismatches
    B. Routing tables on each side of the link
    C. Packet loss on the nodes on either side of the connection
    D. MTU of each side of the link
A

C

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q
  1. Which of the following object types can you apply in Universal Device Poller? Choose two.
    A. Nodes
    B. Volumes
    C. Interfaces
    D. Servers
A

A-C

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q
  1. Your network has critical devices on the opposite side of a WAN link from your SolarWinds server. You do not want alerts about the device if the router (name = “target’) that connects your SolarWinds server to the remote site is down. How do you configure Alert Suppression?
    A. Suppress alert when any of the following apply: Node Name is equal to “target” /Node Status is equal to “Warning”
    B. Suppress alert when any of the following apply: Node Name is equal to “target” /Interface Status is equal to “Warning”
    C. Suppress alert when any of the following apply: Node Name is equal to “target” /Interface Status is equal to “Down”
    D. Suppress alert when any of the following apply: Node Name is equal to “target” /Node Status is equal to “Down”
A

D

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q
  1. You can import Universal Device poller files from the UNDP application directly into Device Studio to create custom poller.
    A. True
    B. False
A

FALSE

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q
  1. A user reports he cannot see all the nodes on a network map from the Web Console. No other users report the issue. How do you resolve this issue?
    A. Set up drill-down views for the map.
    B. Edit override account limitations for the map in Network Atlas
    C. Grant permissions to the SolarWinds map creation tool
    D. Create an account limitation
A

D

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q
  1. How many agents does NPM require for Quality of Experience, NetPath, and system monitoring on same Windows server?
    A. 2
    B. 3
    C. 5
    D. 1
A

D

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q
  1. A remote user is unable to access the corporate network VPN. You use Cisco ASA firewalls. How can you determine the cause. Select all that apply.
    A. AppStack
    B. Netpath
    C. Devices View
    D. Network Insight
A

B-D

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q
  1. Users report that email is slow. The Exchange team reports that everything is normal on the mail servers. What NPM can you look at to find what might be causing the issue?
    A. SMTP service on the Exchange server
    B. Network bandwidth utilization
    C. Server component monitor status
    D. Mail queue length on the Exchange server
A

B

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
23
Q
  1. Users in a remote office are reporting that access to network resources is slow. You decide to use PerfStack to investigate the issue. Which statistics should you use in order to find a correlation between the amount of traffic and how close the interface is to being fully saturated? Choose two.
    A. Status
    B. Transmit Discards
    C. Transmit Utilization
    D. Average Transmit bps
    E. Average CPU Load
A

C-D

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
24
Q
  1. You want to reduce the number of decimal places returned by an UnDP you created. Which Transform should you use to do this?
    A. Maximum
    B. Minimum
    C. ColumnMaximum
    D. Truncate
A

D

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
25
Q
  1. When a router monitored by NPM reboots, the interface indexes statuses change to unknown in NPM. What do you do after your remove the unknown interfaces?
    A. Manually update the interface indexes.
    B. Run the Configuration Wizard to update the interface indexes.
    C. Run a list of resources on that node and add the interfaces with the updated index IDs
    D. Update the NPM internal ID numbers.
A

C

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
26
Q
  1. One of your hub sites is experiencing slow network performance. You decide to use PerfStack to find the cause of the problem. From which device would you start your analysis?
    A. From the central site’s core router
    B. From one of the central site’s switches
    C. From the affected hub site’s firewall
    D. From the affected hub site’s edge router
A

D

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
27
Q
  1. You can use Device Studio to create pollers for CPU and memory.
    A. True
    B. False
A

TRUE

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
28
Q
  1. Your company uses a web-based ticketing tool to handle IT incidents and requests. You want it to be accessible without leaving Orion Web Console. How do you accomplish this?
    A. Add a custom property that points to you ticketing tool’s URL
    B. Add an external website to the Menu bar
    C. Add a custom link to the Modules bar
    D. Add user-defined links to the Menu bar
A

B

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
29
Q
  1. You want to increase the time of the delay between an alert firing and the email being sent out. What is the correct format for the trigger action on an alert to show the Top 10 processes?
    A. Email the processed variable selected on first execution level.
    B. Executable on first escalation level and then a 2 minute delay and the email on second escalation level.
    C. Executable and email on the same escalation level.
    D. Email on first escalation level and then a 2 minute delay and the executable on second escalation level.
A

B

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
30
Q
  1. A Windows server application on cloud instances encounter degraded performance issues. An alert triggers and sends information to system and network administrators. Which Orion platform feature can you use to create a troubleshooting project to investigate the issue?
    A. NetStack
    B. AppStack
    C. PerfStack
    D. Netpath
A

C

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
31
Q
  1. Instead of the SolarWinds logo, you want your company logo to display on the banner area of the Orion Web Console. Which of the following will allow you to do this?
    A. Use the Custom Property Editor and apply your company logo to all monitored nodes
    B. Use Network Atlas to display your company images and branding
    C. Use Web Console settings to upload your company logo
    D. Use Manage Views to add a custom HTML resource that contains your logo
A

C

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
32
Q
  1. Instead of the SolarWinds logo, you want your company logo to display on the banner area of the Orion Web Console. Which of the following will allow you to do this?
    A. Use the Custom Property Editor and apply your company logo to all monitored nodes
    B. Use Web Console settings to upload your company logo
    C. Use Network Atlas to display your company images and branding
    D. Use Manage Views to add a custom HTML resource that contains your logo
A

B.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
33
Q
  1. You need to change the polling method from ICMP to SNMP on 200 nodes you monitor with Orion. How would you best accomplish this?
    A. Unmanage all the nodes and remanage them choosing SNMP as the polling method
    B. Use the Orion Polling Configuration tool to change polling methods
    C. Edit each individual node and change the polling method
    D. Bulk select nodes in Manage Nodes and change the polling method.
A

D

34
Q
  1. You want to avoid reaching a certain usage level on a number of critical devices. Which forecast calculation method should you use on these devices?
    A. Automatic Calculation
    B. Manual Calculation
    C. Peak Calculation
    D. Average Calculation
A

C

35
Q
  1. You run ten reports on three assorted weekly schedules and send the results to the network operations distributions. You should address for the distribution list changed, and you must update the new email address to send the reports. How do you apply this update?
    A. Use the Schedule Manager to edit each action on each report schedule, and changed the email address.
    B. Edit each action on each report schedule, and change the email address.
    C. Make a copy of each report, edit the action to change the email address.
    D. Use the Action Manager to edit each action on each report schedule, and change the email address.
A

A

36
Q
  1. You can display Palo Alto firewall on Orion Maps.
    A. True
    B. False
A

TRUE

37
Q
  1. You can import device specific MIB into the SolarWinds MIB database, but you cannot import UNDP pollers based on OID from the device specific MIB.
    A. True
    B. False
A

FALSE

38
Q
  1. How do you display downtime for all monitored interfaces on a node.
    A. You can only view interface downtime in stored history.
    B. Enable downtime history retention
    C. Enable interface downtime monitoring
    D. Add the interface downtime widget on node view
A

D

39
Q
  1. How are Orion agent licensed?
    A. Only Windows agent need to be license, linux is free.
    B. Licenses are available in a set of one upon request.
    C. Agent require the SolarWinds Agent provisioning module SAP.
    D. No separated license is required.
A

D

40
Q
  1. You want to change the calculation method for calculating the capacity forecast for all monitored interfaces. Where do you go to change this?
    A. Orion Threshold
    B. NPM Threshold
    C. Web Console Settings
    D. Manage Alerts
A

B

41
Q
  1. You monitor a device only using ICMP that which statistic does NPM not collect on this device? Select all that apply.
    A. CPU Load
    B. Availability
    C. Bandwidth Utilization
    D. Response Time
    E. Memory Utilization
A

A-C-E

42
Q
  1. What is required of your nodes to detect duplex mismatches? Select all that apply.
    A. Unified the duplex mode configuration on neighboring interfaces.
    B. Ensure corresponding values for each interface are different.
    C. The node must support topology and be interconnected
    D. Duplex of both devices must be identified as full or half.
A

A-C-D

43
Q
  1. Where can you verify that NPM complies to the retention policy?
    A. Syslog Viewer
    B. Orion Polling Settings
    C. Storage Disk
    D. SNMP service settings
A

B

44
Q
  1. Where can you verify that NPM complies to the retention policy?
    A. Syslog Viewer
    B. Orion Polling Settings
    C. Storage Disk
    D. SNMP service settings
A

B

45
Q
  1. Status, average response time, and packet loss are the only node details data you can view for your switch A device. The details of your identical switch B device shows status, average response time and packet loss and other statistics. How to monitor the other statistics on switch A and not to lost any historical data?
    A. Edit the node properties of Switch A and change the polling method to “status only: ICMP”
    B. Edit the node properties of Switch A and change the polling method to “most device: SNMP and ICMP”.
    C. Edit the node properties of Switch B and change the polling method to “status only: ICMP”
    D. Add switch A again without deleting it first, and this time choose “most devices: SNMP and ICMP” as the polling method.
    E. Delete switch A, and then add it again in this time choose “most devices: SNMP and ICMP” as the polling method.
A

B

46
Q
  1. You want to create a custom poller for a device. When you select the OID, you get an “OID not support” error. What does this mean?
    A. Your firewall is blocking SNMP request.
    B. The SNMP stream that you use is incorrect.
    C. SNMP agent on the device does not report on this OID
    D. This OID requires the read/write community string.
A

C

47
Q
  1. You are creating an alert for a Universal Device Poller (UnDP). Which of the following trigger condition helps you target the custom poller you want?
    A. A trigger condition where the custom poller MIB is equal to the MIB used in your UnDP
    B. A trigger condition where the custom poller Unique Name is equal to the name of your UnDP
    C. A trigger condition where the custom poller enabled is equal to true
    D. A trigger condition where the custom poller SNMP get type is equal to GetNext
A

B

48
Q
  1. You are creating an alert for a Universal Device Poller (UnDP). Which of the following trigger condition helps you target the custom poller you want?
    A. A trigger condition where the custom poller Unique Name is equal to the name of your UnDP
    B. A trigger condition where the custom poller MIB is equal to the MIB used in your UnDP
    C. A trigger condition where the custom poller enabled is equal to true
    D. A trigger condition where the custom poller SNMP get type is equal to GetNext
A

A

49
Q
  1. What is required to monitor tenants in your SDN environment with NPM Cisco ACI monitoring? Select all that apply.
    A. Enable API polling on the APIC node.
    B. Enable API polling on all ACI devices.
    C. Add an APIC node to NPM.
    D. View your SDN environment in Orion maps.
A

A-B-C

50
Q
  1. You want to ensure that an NPM user is only able to see Windows devices on any and all views in NPM. What steps will allow you do this? Choose two.
    A. Create an Account Limitation
    B. Create a View Limitation
    C. Select Limitation Type: Single Machine Type
    D. Select Limitation Type: Hardware Manufacturers
    E. Create a new account for Windows
A

A-D

51
Q
  1. You need to add a new subnet of 500 devices for monitoring. What is the first step to incorporate this devices into NPM?
    A. Perform a network discovery
    B. Measure network wide bandwidth consumption.
    C. Add the node using the add node feature in manage node.
    D. Collect NetFlow from a core router.
A

A

52
Q
  1. You need to push a SolarWinds agent to 20 windows across your network. How can you accomplish this? Select all the apply.
    A. Use the active directory group policy to mass deploy agent.
    B. Deploy the agent directly from the Orion Server.
    C. Use an .MSI package and install each agent manually.
    D. Use the configuration wizard, select agent polling and then deploy the agent.
A

A-B

53
Q
  1. Your company has two sites. Both have a local IT staff who use NPM. You want to make sure that each site can only view and manage monitored devices in their respective sites. Choose two features that when used together allow you to efficiently fulfill this requirement?
    A. View limitations
    B. Account limitations
    C. Device Studio
    D. Custom Property Editor
    E. PerfStack
A

B-D

54
Q
  1. You have two group of users - one in Sydney and one in Perth. How do you limit the user within the Orion Platform so they only have access to the device in their location?
    A. Group devices into geographical Orion groups and use single group account limitation to limit user access.
    B. Configure the Orion Web Console settings to show only devices in the user geographical location.
    C. Use the Orion Service Manager to limit user access to node only in their location.
    D. Configure network atlas to show only devices in their geographical location.
A

A

55
Q
  1. You configured devices to send SNMP trap to NPM, but do not see the messages in the Orion Web Console. You verified that the firewall port are open and the devices are correctly configured. What can you verify to troubleshoot the cost.
    A. Verify that you have the SNMP trap module installed for NPM.
    B. Verify you configure the SNMP trap view in the Orion Web Console.
    C. Verify you use log analyzer to view trap.
    D. Verify the SNMP trap service is running.
A

D

56
Q
  1. You receive a number of alerts on high traffic utilization from several interfaces. When you view the Orion Web Console, you find that traffic utilization has returned within normal ranges. Traffic utilization spikes every now and then and you don’t usually consider it a problem. How should you modify the alert definitions so that it fires only when high utilization is sustained for 10 minutes or more?
    A. Configure the alert to trigger only when traffic utilization is sustained for 10 minutes
    B. The polling frequency on the interfaces should be shorter than 10 minutes
    C. The polling frequency on the interfaces should be longer than 10 minutes
    D. Configure the alert to reset if traffic utilization is sustained for 10 minutes
A

A

57
Q
  1. You stop receiving the volume status and volume statistic from one of your Windows 2016 server. Packet traces reveal request are delivered to and from the server and the device is up in the NPM console. What is most likely the cause of the issue?
    A. WMI versioning.
    B. Firewall rules.
    C. Windows update occurred on the system.
    D. Volume index has change because the disk was replaced.
A

D

58
Q
  1. Your team member cannot see any report in the Orion Console. What can cause this issue.
    A. The report writer is not installed.
    B. The no report limitation is applied to the user account.
    C. The SQL server is on a different system than the SolarWinds server.
    D. The report are configured with more than one limitation category.
A

B

59
Q
  1. Your team member cannot see any report in the Orion Console. What can cause this issue.
    A. The report writer is not installed.
    B. The report are configured with more than one limitation category.
    C. The SQL server is on a different system than the SolarWinds server.
    D. The no report limitation is applied to the user account.
A

D

60
Q
  1. How can you quickly generate a report in NPM to show the top 50 interfaces by percent utilization?
    A. Create an advance SQL query report.
    B. Copy a similar default report and edit it for the different time frame.
    C. Create a web-based report and filter the data to restrict to the top 50 interfaces.
    D. Copy a similar default report and edit for the top 50 interfaces.
A

D

61
Q
  1. You need to create a report on bandwidth utilization in your network during office hours over the previous month. How do you fulfill this requirement?
    A. Pull all of the usage data and average it by month
    B. Pull last month’s usage data and filter out non-business hours
    C. Pull this year’s usage data and filter by month
    D. Pull last month’s usage data and sort it by time of day
A

B

62
Q
  1. A custom poller has polled some results from nodes. Which of the following is the possible reason for not being able to show the polled result as chart on the Orion Web Console?
    A. We did not set the poller to collect historical statistics
    B. You must use device studio to build the poller.
    C. Charts are only supported by out-of-the-box pollers.
    D. The poller is not enabled and assigned to the devices.
A

A

63
Q
  1. You added a device for NPM to monitor. You can see CPU and memory statistics, but want to use a statistic that NPM does not support out-of-the-box, which feature can you use to collect the statistics you want from the devices. Select all that apply.
    A. Manage pollers in device studio.
    B. Application monitor template.
    C. Universal Device Poller or UNDP.
    D. Device template.
A

A-C

64
Q
  1. You need to ensure that each NPM user has exclusive access to reports he is responsible for. Which of the following will help you achieve this?
    A. Save the reports in different sub-directories under \Reports and set those as the Report Folder for each account.
    B. Use custom properties and account limitations to control report access.
    C. Create the reports while logged in as each user and set the appropriate permissions.
    D. Save the reports in different sub-directories and set the permissions for each user.
A

B

65
Q
  1. Which two performance metrics can be affected by proper QoS implementation
    A. Jitter
    B. Marking
    C. Queuing
    D. Latency
A

A-D

66
Q
  1. Which traffic type should be allowed to leverage HTTPS for network monitor?
    A. 80
    B. 8080
    C. 443
    D. 4433
A

C

67
Q
  1. You sent a link to a report you created in NPM to key stakeholders. These individuals do not have an account in the Orion Web Console. You want them to be able to view the reports without having to create an account for them. What should you do?
    A. Create a service account for that they can share
    B. Enable the Link only option on the report
    C. Allow the Guest account to access the report
    D. Create a DirectLink account in the Orion Web Console
A

D

68
Q
  1. You sent a link to a report you created in NPM to key stakeholders. These individuals do not have an account in the Orion Web Console. You want them to be able to view the reports without having to create an account for them. What should you do?
    A. Create a service account for that they can share
    B. Enable the Link only option on the report
    C. Allow the Guest account to access the report
    D. Create a DirectLink account in the Orion Web Console
A

D

69
Q
  1. You need to ensure that an Orion user account can make changes to resources and views as needed. Which permission will allow the user account to do this with the least amount of privilege?
    A. Allow View Customization must be enabled
    B. Allow Admin Rights must be disabled
    C. Allow Node Management Rights must be active
    D. An Account Limitation must be defined
A

A

70
Q
  1. You deployed Orion agents on several Windows and Linux servers in your environment. Which port do you need to open on your network to ensure that secure, agent-initiated communication from Windows and Linux agents can get through?
    A. 17777
    B. 17778
    C. 17779
    D. 17790
    E. 17791
A

B

71
Q
  1. You deployed Orion agents on several Windows and Linux servers in your environment. Which port do you need to open on your network to ensure that secure, agent-initiated communication from Windows and Linux agents can get through?
    A. 17777
    B. 17778
    C. 17779
    D. 17790
    E. 17791
A

B

72
Q
  1. You need to deploy the Orion agent software en masse via Active Directory Group Policy. You’ve created the Group policy but you need the MST file. What’s the quickest way to get the MST file.
    A. Download the file from the customer portal.
    B. Download from the Settings pages of the Orion Web Console.
    C. Copy the installer file from the Orion file directory
    D. Download the file from TWACK
A

B

73
Q
  1. You are creating an alert for a Universal Device Poller (UNDP). Which condition helps you target the custom poller you want?
    A. A trigger condition where the custom poller Unique Name is equal to the name of your UNDP.
    B. A trigger condition where the custom poller Node Name is equal to the node where the UNDP is assigned.
    C. A trigger condition where the custom poller Unique Name is equal to the Node Name.
    D. B and C
A

A

74
Q
  1. You are configuring Orion Map but the Topology connection between some of the nodes are not showing automatically. You have enabled L2 and L3 resource under the List Resource of the node. However, the connection is still not automatically populated.
    A. Re-add the nodes that do not have topology connections.
    B. Manually create connection between nodes in the Orion Map.
    C. Change the polling method from SNMP to ICMP and vice versa.
    D. Check with the device vendor.
A

B

75
Q
  1. You are a network engineer, planning to monitor a network. Which UDP ports should you be monitor in the network? Select all that apply.
    A. 161
    B. 162
    C. 17777
    D. 17778
    E. 1433
A

A-B

76
Q
  1. You are a network engineer, planning to monitor a network. Which UDP ports should you be monitor in the network? Select all that apply.
    A. 161
    B. 162
    C. 17777
    D. 17778
    E. 1433
A

A-B

77
Q
  1. You are planning to run the SolarWinds Network Discovery. However, you want to exclude some elements to be discovered during the discovery. How would you go about it?
    A. Configure Whitelist
    B. Configure Blacklist
    C. Configure Ignore List
    D. None of the above
A

C

78
Q

Users report that email is slow. The Exchange team reports that everything is normal on the mail servers. What NPM statistic can you look at to find what might be causing the issue?

a. Mail queue length on the Exchange Server
b. SMTP service on the Exchange Server
c. Network Bandwidth Utilization
d. Network connectivity to the Exchange Server

A

C

79
Q

You notice that you are no longer receiving volume statistics from the Windows servers you are monitoring. None of them are shown as down on the Orion Web Console. You run a packet trace and you can verify that the requests are making it to the servers. Everything was fine yesterday. What is the most likely cause of this issue?

a. Issues with firewall rules
b. Windows services are stalled
c. WMI version conflict
d. Windows credentials stored in NPM are expired

A

D

80
Q

A firewall separates Orion NPM and the network devices it is monitoring. Only encrypted communication will be allowed from the server for polling and configuration management. Which two ports will need to be allowed through the firewall? (Select all that apply)

a. 22
b. 443
c. 161
d. 162

A

A C

ENPIEM (3 decks)

Brainscape helps you reach your goals faster, through stronger study habits.
© 2024 Bold Learning Solutions. Terms and Conditions