New Questions 4

Question 1

How many passwords are utilized for each user in Cisco Unity Connection? A. 0 B. 1 C. 2 D. 3

Answer 1

C

Question 2

When a user calls a Cisco Unified Communications Manager telephone and another call is already in progress on that telephone, the calling user sees incorrect line identification information. Which configuration item is at fault? A. The calling user dialed the wrong number. B. The directory number exists in two partitions, but each line has different line identification information. C. The call was forwarded to another directory number. D. The line that was called cannot accept more than one call at a time.

Answer 2

B

Question 3

A new user is unable to log into voice mail and no one is able to leave this user a voice-mail message. Which two options are causing the problem? (Choose two) A. The extension number was not configured in Cisco Unity Connection. B. The TUI settings are set to default. C. The mailbox size is too small. D. The DN was misconfigured in Cisco Unified Communications Manager.

Answer 3

A D

Question 4

Which standard is applicable to prevent an unnecessary drop in QoS over an IP WAN connection? A. TCP/IP B. broadband Internet access C. H.450.3 D. policy map

Answer 4

C

Question 5

Which protocol allows Cisco Unified Communications Manager to take control of a specific port on a gateway? A. SIP B. H.323 C. Q.931 D. MGCP

Answer 5

D

Question 6

Which industry standard method does Cisco Unified Presence incorporate for communication between different IM clients? A. Jabber XCP B. Jabber XML C. Jabber TCP D. Jabber TLS

Answer 6

A

Question 7

Which type of data file is used for bulk import of users into Cisco Unity Connection? A. .xls B. .doc C. .csv D. .pdf

Answer 7

C

Question 8

Cisco Jabber facilitates online communication through the use of all of these features except one. Which one? A. chat B. desktop sharing C. Microsoft SharePoint workspace integration D. Microsoft Outlook integration E. Presence F. video conferencing

Answer 8

C

Question 9

Which three methods can be used to import multiple Cisco Unity Connection users at one time on a system that is integrated with Cisco Unified Communications Manager? (Choose three) A. AXL server B. LDAP connection C. user creation tool D. user import function E. XLS import F. You cannot import multiple users at one time.

Answer 9

A B D

Question 10

When you use the Dialed Number Analyzer in Cisco Unified Communications Manager, how does the output get saved? A. as an analysis that only appears on the screen, so you must copy it to another it B. as a log file accessible through the GUI interface C. as a text file named dnaOutput calling party dialeddigits.xml on the Cisco Unified CM server D. as an XML file named dnaOutput callingparty dialeddigits .xml on your local PC

Answer 10

D

Question 11

An administrator is attempting to add a new IP phone to the network. The phone does not register and continues to cycle through the registration process. The administration checks and notices that the IP address assigned to the phone is not correct network. What is the cause of this issue? A. The TFTP server is reconfigured B. The DHCP server is giving out false IP addresses C. The Cisco Unified Communication Manager is down D. The switch port that the phone is connected to is configured with the wrong voice LAN E. The PSTN gateway is down

Answer 11

D

Question 12

Which method is used by Cisco Unified Communications Manager to provide IP phone line status information to Cisco Unified Presence? A. Cisco Unified Communications Manager IP Phone service Device Info B. SIP Publish C. LDAP synchronization D. XML-via-HTTP signaling E. SCCP Station Call information

Answer 12

B

Question 13

When you attempt to add a phone to the Cisco Unified Communications Manager Express using the GUI interface, the error “No New Phone to Add” appears. Which command is causing the error? A. no auto-reg-ephone B. no service ephone-reg C. sip-ua no auto-reg-ephone D. stcapp ccm-group 1

Answer 13

A

Question 14

Which two choices best describe call signaling and media flows? (Choose two) A. a process used to connect two parties calling B. audio or video or both transferred between two parties during conversation C. protocol for end-to-end users D. a flow of audio and instant messaging E. all call control signals being delivered through a channel F. data telephony, over a data network such as the Internet

Answer 14

A B

Question 15

When creating users manually in Cisco Unity Connection, where is the user data maintained? A. IBM Informix database B. Local Cisco Unity Connection database C. LDAP D. Cisco Unified Communications Manager

Answer 15

B

Question 16

Which method can be used to retrieve a call that is placed on hold from a Cisco IP phone? A. call hold B. call park C. call slot D. transfer call

Answer 16

B

Question 17

Which three tools are used to create phone user accounts in Cisco Unified Communications Manager Express? (Choose three) A. Cisco Configuration Professional B. CPE C. CLI D. GUI E. TUI F. Cisco Security Device Manager

Answer 17

A C D

Question 18

Which statement describes the reason that some of the user accounts that are imported from Cisco Unified Communications Manager into Cisco Unity Connection using AXL do not appear in the list of users that is found via AXL? A. The LDAP manager account password is incorrect. B. The DirSync service is not activated. C. The missing user accounts are not configured with a primary extension in the Cisco Unified Communications database. D. The missing user accounts had the Do Not List In Directory setting checked.

Answer 18

C

Question 19

Which three models of configuration does Cisco Unified Communications Manager Express support? (Choose three) A. keyswitch B. PBX C. hybrid D. PSTN E. WAN F. voice gateway G. MOH

Answer 19

A B C

Question 20

Which Cisco Unified Communications platform is being utilized? A. Cisco Unified Communications Manager Express B. Cisco Unified Presence C. Cisco Unity Connection D. Cisco Unified Communications Manager

Answer 20

A

Question 21

Refer to the exhibit.

Which object in the Cisco Unified Communications Manager Express GUI should you access to change a phone user password?

A. CallerID/Name
B. Telephone Number
C. Login Name
D. Phone Physical ID (Mac Address)

Answer 21

D

Question 22

Click and drag the description of the signaling protocol on the left to the appropriate category on the right

Answer 22

+ H323: A standard that provides multimedia communication services – real-time audio, video, and data communications-over packet networks
+ MGCP: Uses call agents and provides the signaling capability for less-expensive edge devices.
+ SIP: Uses a modified form of the URL addressing scheme that is used within email that is based on the Simple Mail Transfer Protocol.
+ SCCP: Clients consume less processing overhead and can also be used to control FXS ports in a router to provide supplementary features.

Question 23

Which statement about the Cisco Unified Presence user, “IT Support,” is true?

A. The user is logged into Cisco Unified Personal Communicator,
B. The user is correctly associated with the appropriate Directory Number Line Appearance.
C. The user has enabled the Do Not Disturb feature on the desk IP phone,
D. The user has enabled the Do Not Disturb feature on Cisco Unified Personal Communicator.

Answer 23

B

Question 24

What is the cause of the error message?

A. The command auto-reg-ephone was not added under telephony-service CLI.
B. There are no free licenses to add more phones.
C. There is no free flash space to upload firmware for the phones.
D. It is just an error message, and you only have to press OK.

Answer 24

A

Question 25

When phones are divided in a group where all phones can answer a call, what is that setup called? A. call accounting B. call pickup C. call grouping D. intercom

Answer 25

B

Question 26

What is the maximum number of lines that is supported by Cisco Unified IP Phone 7965? A. 2 lines B. 4 lines C. 6 lines D. 8 lines

Answer 26

C

Question 27

Under Cisco Unified Reporting on the Cisco Unified Communications Manager, the Unified CM Device Counts Summary report provides what information? A. counts of each type of line, dial number, and device that is in use in the database B. counts of only unified messaging devices that are present C. counts of each type of device that is configured in Cisco Unified Communications Manager as endpoints D. counts of directory numbers that are within the Cisco Unified CM environment

Answer 27

C

Question 28

How is the calendar information in Microsoft Exchange integrated into CUPS Presence signaling so that the Free/Busy status in an Outlook calendar can be mapped to the Available/Away Presence status? A. using WebDAV B. using SIP/SIMPLE C. using CTIQBE D. using XMPP

Answer 28

A

Question 29

Which two layers are Cisco Unified Communications component layers? (Choose two) A. infrastructure layer B. data link layer C. network layer D. endpoints layer E. transport layer

Answer 29

A D

Question 30

In which section of the user template is CoS configured in Cisco Unity Connection? A. Location B. Name C. Phone D. System

Answer 30

C

Question 31

Which three choices are required for the boot process for a Cisco IP phone? (Choose three) A. TFTP services B. DHCP services C. voice VLAN D. routing protocol E. TCP/IP F. PortFast

Answer 31

A B C

Question 32

You decide to increase the number of entries that can be held in the audit log. Where can you do this task? A. It cannot be done. B. It is done by saving old log files to a syslog server and removing them from the original log location. C. It is done in the Service Parameters configuration page. D. In CUC Administration, navigate to System \> Settings \> Advanced Reports.

Answer 32

D

Question 33

Which path would you use to display the configuration of a phone in Cisco Configuration Professional? A. Configure \> Unified Communications \> Users, Phones and Extensions \> Extensions B. Configure \> Unified Communications \> Users, Phones and Extensions \> User Settings C. Configure \> Unified Communications \> Users, Phones and Extensions \> Phones D. Configure \> Unified Communications \> Telephony Settings \> User Settings E. Configure \> Unified Communications \> Users, Phones and Extensions \> Phones and Users

Answer 33

E

Question 34

Refer to the exhibit. ip dhcp pool IP Phones network 209.165.200.224 255.255.255.224 option 150 209.165.200.225 default-router 209.165.200.226 domain-name cisco.com dns-server 209.165.200.226 209.165.201.1 209.165.202.129 Which IP address will the IP phones be provided as the TFTP server? A. 209.165.200.225 B. 209.165.200.226 C. 209.165.201.1 D. 209.165.202.129

Answer 34

A

Question 35

What is the most important factor that contributes to network design availability and reliability? A. high availability B. data backup C. vendor-specific D. fault management

Answer 35

A

Question 36

What are two methods of viewing lost packet statistics for a call between two Cisco Unified IP Phone 7945 phones that are registered to Cisco Unified Communications Manager? (Choose two) A During the call, press the Settings key twice in succession on one of the IP phones. B. During the call, press the Settings key, and then select Status \> Call Statistics on one of the IP phones. C. During the call, press the Web Services key twice in succession on one of the IP phones. D. Find the completed call in Cisco Unified Serviceability \> Tools \> Dialed Number Analyzer. E. Find the completed call in CDR Analysis and Reporting \> CDR \> Search \> By User Extension. F. Find the completed call in CDR Analysis and Reporting \> System \> Log Screens \> Event Log.

Answer 36

B E

Question 37

Which protocol is used between two Cisco IP phones once Cisco Unified Communications Manager Express connects a call? A. H.323 B. RTP C. SCCP D. SIP

Answer 37

B

Question 38

Your Cisco Unified Communications Manager system has extension mobility enabled for users of Cisco Unified Wireless IP Phone 7925 handsets and it is working properly. How would the user access the extension mobility login screen? A. Extension mobility is not available on wireless handsets. B. Power on the phone, and extension mobility automatically starts. C. Power on the phone, and navigate to System Options \> Extension Mobility. D. Power on the phone, and navigate to Web Services \> Extension Mobility.

Answer 38

D

Question 39

Which describes how to provide a third directory number button and a BLF speed dial for twelve of the Cisco Unified IP Phone 7965? A. Modify the Standard User softkey template. B. Copy the Standard User softkey template, name it, and add the requested features. C. Copy the Standard 7965 SCCP phone button template, rename it, and add the requested features. D. It is not possible to add a third DN and a BLF speed dial to the IP Phone 7965 IP.

Answer 39

C

Question 40

What type of SIP trunk does a Cisco Call Back support? A. QSIG enable B. QUERTY enable C. 802.1q D. ISL

Answer 40

A

Question 41

What are three client applications that interface directly with Cisco Unified Presence? (Choose three) A. Cisco Unified Personal Communicator B. Cisco Jabber Video for Telepresence C. Cisco IP Communicator D. Cisco Jabber E. Cisco Unified Mobile Connector F. Microsoft Lync G. Microsoft Messenger H. Microsoft Office Communicator

Answer 41

A D E

Question 42

An SCCP IP phone places a call to a SIP phone that is registered to the same Cisco Unified Communications Manager Express. During the active call, call waiting indicates a second call is incoming to the handset, but the user decides to ignore it. In this scenario, what is the combined total number of signaling conversations and media flows that used the SCCP phone as an endpoint? A. 2 B. 3 C. 4 D. 5 E. 6

Answer 42

B