Nexus Platform Features

Question 1

What is the primary function of Port Profiles in NX-OS?

Answer 1

Your selection is correct because port profiles streamline the configuration process by allowing you to apply a set of common settings across multiple interfaces, ensuring consistency and saving time.

Question 2

Which types of port profiles are supported in NX-OS?

Answer 2

You selected “Ethernet, Port Channel, Interface-VLAN” because these are indeed the three types of port profiles supported in NX-OS

Question 3

What is the default type of a port profile in NX-OS?

Answer 3

You correctly identified “Ethernet” as the default port profile type in NX-OS because this is the standard setting applied unless you specifically change it.

Question 4

Which command is used to change a port profile type?

Answer 4

You selected “port-profile type <type> <name>" because it accurately represents the command syntax used to define a specific type of port profile in NX-OS, such as Ethernet, Port Channel, or Interface-VLAN.</name></type>

Question 5

Once a port profile type is created, can it be changed later?

Answer 5

You selected “No” because once a port profile is created in NX-OS, its type cannot be modified; instead, you must delete the existing profile and create a new one.

Question 6

How can you verify which interfaces are using a specific port profile?

Answer 6

You selected “show port-profile expand-interface name <profile-name>" because it effectively displays all interfaces that are inheriting configurations from the specified port profile, allowing you to verify which interfaces are utilizing that profile.</profile-name>

Question 7

Which command is used to synchronize NTP settings using CFS?

Answer 7

You selected “ntp distribute” because it correctly describes the command used to distribute NTP settings across configurable virtualized system (CFS) peers, ensuring synchronization across devices.

Question 8

What is the function of “CFS” in NX-OS?

Answer 8

You selected “It manages Cisco Fabric Services” because CFS is responsible for synchronizing configurations across multiple devices in a network, enabling consistent management and operation of those configurations.

Question 9

How do you check the status of CFS in NX-OS?

Answer 9

You selected “show cfs status” because it accurately verifies the status of Cisco Fabric Services, which is essential for understanding the operational state of configuration synchronization across your network devices.

Question 10

What command enables CFS for IPv4 distribution?

Answer 10

You selected “cfs ipv4 distribute” because it specifically activates Cisco Fabric Services for the synchronization of configurations across devices using IPv4.

Question 11

What must be created for CFS to work properly?

Answer 11

You selected “CFS Region” because it is essential for coordinating the configuration distribution across devices. While creating a CFS region is optional, it is highly recommended as it helps in organizing and managing groups of devices more effectively within your network configuration strategy

Question 12

What command is used to verify if NTP settings are synchronized with CFS peers?

Answer 12

You selected “show run ntp” because it effectively displays the NTP configuration settings and confirms whether they are synchronized with your CFS peers.

Question 13

Which of the following is true about F-Series and M-Series ports with port profiles?

Answer 13

You selected “They cannot be mixed within the same port profile” because F-Series and M-Series ports require separate profiles, ensuring that each series operates under its specific configurations and performance standards