NFPA 10 Chapter 1-3

Question 1

What is the Conversion Factor for Millimeter?

Answer 1

1 in. = 25.4 mm

Question 2

Low pressure cylinders contain how much service pressure?

Answer 2

500 psi

Question 3

Bromo-chloro-Di-fluoromethane

Answer 3

Halon 1211

Question 4

Bromo-TRI-fluoromethane

Answer 4

Halon 1311

Question 5

A powder composed of very small particles, usually sodium bicarbonate, potassium bicarbonate, or ammonium phosphate with added particulate material supplemented by special treatment to provide resistance to packing, resistance to moisture absorption (caking), and the proper flow capabilities.

Answer 5

Dry Chemical

Question 6

System constructed in a manner that DOES NOT introduce foreign material into the agent being recovered.

Answer 6

Dry Chemical Closed Recovery System

Question 7

Indicates a mandatory requirement

Answer 7

Shall

Question 8

Acceptable to the authority having jurisdiction

Answer 8

Approved

Question 9

The PROVISIONS of this standard apply to the selection, installation, inspection, maintenance, recharging, and testing of portable fire extinguishers.

Answer 9

Scope

Question 10

This STANDARD is prepared for use by and guidance of persons charged with selecting, purchasing, installing, approving, listing, designing and maintaining portable fire extinguishers .

Answer 10

Purpose

Question 11

NFPA 96

Answer 11

Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations, 2011 edition

Question 12

NFPA 303

Answer 12

Fire Protection Standard for Marinas and Boatyards

Question 13

NFPA 500

Answer 13

Building Construction and Safety Code

Question 14

Solid materials in powder or granular form designed to extinguish Class D combustible metal fires by crusting smothering

Answer 14

Dry Powder

Question 15

those with a depth greater than 1/4in (6.3mm)

Answer 15

Flammable Liquids of Appreciable Depth

Question 16

pressure shown on the nameplate at which a shell was tested at time of manufacture

Answer 16

Factory Test Pressure

Question 17

Vehicles will be inspected _________

Answer 17

Annually or as deemed necessary

Question 18

Fire Equipment Dealer who does not want to engage in servicing halon equipment must file what affidavit?

Answer 18

Fire Equipment Dealer Halon Exemption Affidavit

Question 19

Each licensed business location shall be required to possess, at a minimum, the required equipment listed below, the equipment shall be demonstrated at the time of any inspection, to be functional to perform services as indicated by the license.

Answer 19

Hydrostatic test for high pressure testing
Equipment for test dating United States DOT
Die stamps for Class A & D facilities
Clock with sweep second hand or digital clock
CO2 receiver bulk
Conductivity tester & Tags
Scales

Question 20

Any change of corporate officers must be reported within

Answer 20

14 days

Question 21

License and permit applications to reflect change of residence, principal business or name shall be done within

Answer 21

30 days

Question 22

True or False.
No licensee shall conduct his or his licensed business under a name other than the name which appears on his or her license.

Answer 22

True

Question 23

Continuing Education hours (CEUs)

Answer 23

1 hour business practices class, 1 hour workers comp., 14 hours technical
(16 hours total)

Question 24

True or False.
a permittee changing his or her place of employment shall obtain a new permit under the license of the license-holder at the new place of employment.

Answer 24

True

Question 25

Licensee shall notify Regulatory Licensing Section of individual leaving his or her employment within

Answer 25

15 days of termination

Question 26

Anyone failing the exam will be permitted to take the exam at no fewer than

Answer 26

30 days

Question 27

Anyone wishing to upgrade a license or permit must have

Answer 27

2 yrs experience

Question 28

True or False | a fire equipment dealer license is transferable to another person or business

Answer 28

False. | Dealer License are non-transferable

Question 29

True or False | a fire equipment permit is not transferable to another person or business

Answer 29

True

Question 30

How many Continuing Education hours are needed

Answer 30

16 hrs

Question 31

Any equipment manufacturer or state certified fire equipment dealer with at least __ years experience may teach any technical course within the scope of the dealers license

Answer 31

5

Question 32

Continuing education coursework approval is valid for _______ from the date of issue.

Answer 32

2 years

Question 33

A listing of approved courses will be available from the ______________________, the course list will include the___________.

Answer 33

Regulatory License Section | course number

Question 34

How many days do you have to produce insurance?

Answer 34

30 days

Question 35

In lieu of providing a document bearing the licensee or permittee's signature, the course provider shall provide the licensee or permittee identity verification data which shall include the licensee or permittee password and the licensee or permittee ____________

Answer 35

mothers maiden name

Question 36

how long shall the course provider maintain list of names and license or permit numbers of each person who completes each course?

Answer 36

hold records for 4 years