NOCTI Flashcards
yes. (29 cards)
RIP resolves the counting to infinity problem by setting the stop point in the routing loop to _______, the maximum number of hops.
15
In compliance with safety regulations, connect the grounded wrist strap for a computer to the
non-conductive surface
Hexadecimal C6 converted to binary is
11000110
To terminate UTP cable onto the rear of a patch panel or on the rear of a wall outlet, a network technician uses a
punch down tool
The network portion of the Class B address 154.19.2.7 is
154.19
The NIC is installed on
the system board
The ________ wireless communication standard has a maximum data transfer rate of 54 Mbps.
802.11g
A secondary ring in Fiber Distributed Data Interface (FDDI)
provides redundancy against primary ring failure
The data-link layer uses ____ to organize, or group bits of data.
frames
The TCP/IP networking model is a ____-layer model describing how communications should take place among computer systems.
four
The first six characters of a MAC address represent the
manufacturer’s unique identifier
A Category-5 cable exceeding 300 feet might result in
attenuation
Which of the following lists correctly arranges the layers of the OSI Model from Layer 7 to Layer 1?
application, presentation, session, transport, network, data-link and physical
Which industry standard directory access protocol is responsible for making Active Directory widely accessible to other applications and programs?
Lightweight Directory Access Protocol- LDAP
The encapsulation process is best described as
data, segments, packets, frames and bits
Performing a loopback test on a router will check the
IP address of the LAN interface
Ethernet is
the standard local area network (LAN) access method
Category-6 cable has
4 pairs
A common interior routing protocol that has the features of both distance vector and link-state
EIGRP
The ____ layer connects users via lower-end switches and wireless access points in a three-layered network design.
access
Broadcast domains are controlled at what layer of the OS model and with what device?
Layer 3 with routers
A technician should install a ___ to reduce collision domain size between multiple network segments.
switch
Switches and their forwarding decisions operate at
OSI Layer-2 and use MAC addresses to make decisions
The set of rules that determines the format and transmission of data is known as a
protocol
