PAES 101 TO PAES 166 Flashcards by Krstn Eve

Implement consisting of long, flat and curved teeth made of spring steel.
a. Roller-harrow
b. Disc harrow
c. Spring-tooth harrow
d. Spike-tooth harrow

c. Spring-tooth harrow

How well did you know this?

Not at all

Perfectly

PAES 151:2010 Agricultural Machinery
a. Power Sprayer for Mango –
Specifications
b. Sugarcane Planter – Specifications
c. Spring-tooth Harrow – Specifications
d. Mechanical Rice Transplanter –
Specifications

d. Mechanical Rice Transplanter –
Specifications

How well did you know this?

Not at all

Perfectly

Type of field cultivator wherein main frame is mounted on the front of the tractor.
a. Three-point hitch mounted
b. Field cultivator
c. Front mounted
d. Drawn type cultivator

c. Front mounted

How well did you know this?

Not at all

Perfectly

Machine designed for transplanting rice seedlings into a puddled and leveled field.
a. Transplanting
b. Transplanting arm
c. Mechanical rice transplanter
d. Human transplanting

c. Mechanical rice transplanter

How well did you know this?

Not at all

Perfectly

Total force parallel to the direction of travel required to move the implement.
a. Draft
b. Drawbar horsepower
c. Implement
d. Drawbar power

a. Draft

How well did you know this?

Not at all

Perfectly

Based on PAES 117: 2000 small engine – methods of test, how many hours shall the engine run continuously with continuous speed and power specified by the manufacturer.
a. four
b. three
c. five
d. six

c. five

How well did you know this?

Not at all

Perfectly

Implement performing shallow post-plant
tillage to aid the crop by loosening the
soil and/or by mechanical eradication of
undesired vegetation.
a. Continuous-tool bar cultivator
b. Field cultivator
c. Cultivating tillage implement
d. Separated gang cultivator

c. Cultivating tillage implement

How well did you know this?

Not at all

Perfectly

Implement consisting of tool bars that
extend across the top of the rows, which
allow lateral adjustments of the tools for
different row spacing.
a. Continuous-tool bar cultivator
b. Field cultivator
c. Cultivating tillage implement
d. Separated gang cultivator

a. Continuous-tool bar cultivator

How well did you know this?

Not at all

Perfectly

Implement consisting of tool bars that
drop down between the rows to provide
maximum vertical clearance for the plants.
a. Continuous-tool bar cultivator
b. Field cultivator
c. Cultivating tillage implement
d. Separated gang cultivator

d. Separated gang cultivator

How well did you know this?

Not at all

Perfectly

Based on PAES Walking-type Agricultural
Tractor (rotary tilling-type), the noise
emitted by the tractor measured 50 mm away
from the operator’s ear level shall not be
more than?
a. 94 db (A)
b. 98 db (A)
c. 96 db (A)
d. 92 db (A)

d. 92 db (A)

How well did you know this?

Not at all

Perfectly

Soil-handling implements which forms
uniform ridges of soil to predetermined
shapes
a. Coulter
b. Bed shaper
c. Blade
d. Hitch

b. Bed shaper

How well did you know this?

Not at all

Perfectly

Soil-working tool, consisting of an
edge and a surface, which is primarily
designed to cut through the soil.
a. Coulter
b. Draft
c. Blade
d. Hitch

c. Blade

How well did you know this?

Not at all

Perfectly

Circular, flat tool used to cut plant
material and soil.
a. Coulter
b. Bed shaper
c. Blade
d. Hitch

a. Coulter

How well did you know this?

Not at all

Perfectly

Force to propel an implement in the
direction of travel which is equal and
opposite to drawbar pull.
a. Coulter
b. Draft
c. Blade
d. Hitch

b. Draft

How well did you know this?

Not at all

Perfectly

Portion of an implement designed to
connect the implement to a power source.
a. Coulter
b. Draft
c. Blade
d. Hitch

d. Hitch

How well did you know this?

Not at all

Perfectly

Miniature plow attachment whose purpose
is to turn over a small furrow slice
directly ahead of the main moldboard plow
bottom, to aid in covering trash.
a. Coulter
b. Jointer
c. Blade
d. Hitch

b. Jointer

How well did you know this?

Not at all

Perfectly

Soil profile modified by tillage or
amendments for use by plant roots
a. Root zone
b. Land
c. Seedbed
d. Root bed

d. Root bed

How well did you know this?

Not at all

Perfectly

PAES 124: 2002 walking-type
agricultural tractor – Part 3: special type
(float-assist tiller), what is the
recommended peak transmission efficiency of
the tractor?
a. 90%
b. 85%
c. 80%
d. 95%

c. 80%

How well did you know this?

Not at all

Perfectly

Part of the soil profile exploited by
the roots of plants.
a. Root zone
b. Seedbed
c. Root bed
d. Head land

a. Root zone

How well did you know this?

Not at all

Perfectly

Soil zone which affects germination and
emergence of seeds.
a. Root zone
b. Land
c. Seedbed
d. Root bed

c. Seedbed

How well did you know this?

Not at all

Perfectly

Based on PAES 118: 2001 four-wheel
tractor, the tractor shall be able to pull
field implements up to what speed?
a. 8 km/h
b. 10 km/h
c. 12 km/h
d. 14 km/h

a. 8 km/h

How well did you know this?

Not at all

Perfectly

Tillage in which a narrow-curved shank
is used.
a. Anchoring
b. Ridging
c. Listing
d. Chisel plowing

d. Chisel plowing

How well did you know this?

Not at all

Perfectly

Component of the power sprayer used to
regulate the pressure.
a. Automatic switch valve
b. Cut-off valve
c. Solenoid valve
d. Pressure relief valve

d. Pressure relief valve

How well did you know this?

Not at all

Perfectly

Type of force type hand pump that
discharges water only on the forward stroke
of the piston or plunger and draw in water
into the cylinder during the back stroke.
a. Single acting
b. Force type
c. Double acting
d. Lift type

a. Single acting

How well did you know this?

Not at all

Perfectly

Type of power sprayer mounted on wheels, either pushed by an operator or towed by a vehicle. The pump can be powered by an engine or an electric motor. a. Wheel frame power sprayer b. Wheel-mounted power sprayer c. Power sprayer d. Frame mounted power sprayer

b. Wheel-mounted power sprayer

PAES 159:2011 Agricultural Machinery a. Power Sprayer for Mango – Specifications b. Sugarcane Planter – Specifications c. Spring-tooth Harrow – Specifications d. Mechanical Rice Transplanter – Specifications

b. Sugarcane Planter – Specifications

Sugarcane stalks containing buds used as planting mat. a. Feeding shank b. Sugarcane billet plant c. Sugarcane plant d. Sugarcane billet

d. Sugarcane billet

28. Based on PAES119: 2001 four-wheel tractor – methods of test, what is the recommended noise emitted by the tractor measured 50 mm away from the operator’s ear level? a. Shall be more than 92 db (A) b. Shall not be more than 92 db (A) c. Shall be lesser than 92 db (A) d. Shall be exactly 92 db (A)

b. Shall not be more than 92 db (A)

Operation which pulverizes, smoothens, and makes the soil ready for planting. a. Harrowing b. Middlebreaking c. Incorporating d. Off barring

a. Harrowing

Based on PAES 132: 2004 Disc/Moldboard Plow – Methods of Test, what is the required travelling speed during operation for two-wheel tractor-drawn plows? a. 2 kph to 3 kph b. 3 kph to 4 kph c. 5 kph to 6 kph d. 8 kph to 9 kph

b. 3 kph to 4 kph

Operation wherein a lister is used in a manner that forms a furrow midway between two previous rows of plants a. Harrowing b. Middlebreaking c. Incorporating d. Off barring

b. Middlebreaking

Plow bottom that has less curvature than the stubble and can be used easily for stubble, ordinary trash and stalk cover land. a. General-purpose moldboard b. Stubble moldboard c. Slatted moldboard d. Moldboard plow

a. General-purpose moldboard

Plow bottom that has long, narrow and less sloping moldboard with a gradual twist that allows complete inversion of the furrow slice with minimum breakage. a. Share b. Stubble moldboard c. Plow bottom d. Sod moldboard

d. Sod moldboard

Working part of the plow which includes the share, moldboard, and landside, all attached to the frog. a. Share b. Moldboard plow c. Plow bottom d. Sod moldboard

c. Plow bottom

Type of plow mounted on the tractor’s three-point linkage and depends upon the tractor for its general operation. a. Trailing moldboard plow b. Tractor-mounted moldboard plow c. Tractor-mounted reversible disc plow d. Semi-mounted moldboard plow

b. Tractor-mounted moldboard plow

Type of plow hitched to the drawbar or lower links of the tractor, supported by two or three wheels and equipped with hydraulic lines and cylinders for lifting and/or depth control. a. Semi-mounted reversible disc plow b. Trailing moldboard plow c. Tractor-mounted reversible disc plow d. Semi-mounted moldboard plow

b. Trailing moldboard plow

Based on PAES 112: 2000 Lever-Operated Knapsack Sprayer, the overall weight of the sprayer with its component parts, when fully loaded with water shall not exceed how many kilograms? a. 12 b. 16 c. 22 d. 25

c. 22

Serves as an adaptor of the drill bit and conduit of water jet channel. a. Drilling rig b. Drilling pipe c. Drill bit d. AOTA

b. Drilling pipe

A type of drilling rig in which the mode of drilling is done by using a rotating drill bit that cut and loosen the soil thus producing a hole of required diameter. a. Rotary b. Percussion c. Combination d. AOTA

a. Rotary

A type of drilling rig in which the mode of drilling is done by alternately raising and dropping either an external weight (solid steel or wood) or the drilling stem itself, causing the impact of the drill bit to the soil, thus producing a hole of required diameter. a. Rotary b. Percussion c. Combination d. AOTA

b. Percussion

Based on PAES 118: 2001 four-wheel tractor, what is the allowable wheel slip for maximum efficiency for two-wheel drive tractor at tilled or soft soil. a. 20-40 b. 10-20 c. 10-15 d. 10-30

c. 10-15

A type of drilling rig in which the mode of drilling is done by rotary action and percussion. a. Rotary b. Percussion c. Combination d. AOTA

c. Combination

Type of hand pump intended for use in lifting water from low-head cisterns and wells, the depth of which is not beyond the head furnished by atmospheric pressure. a. Single acting b. Lift type c. Double acting d. Force type

b. Lift type

Part of granule applicator where granules are loaded. a. Hopper b. Agitator c. Granule d. Granule applicator

a. Hopper

PAES 163:2011 agricultural machinery a. Power sprayer for mango – specifications b. Sugarcane planter – specifications c. Spring-tooth harrow – specifications d. Mechanical rice transplanter – specifications

c. Spring-tooth harrow – specifications a. Power sprayer for mango – specifications (PAES 157) b. Sugarcane planter – specifications (PAES 159) d. Mechanical rice transplanter – specifications (PAES 151)

PAES 166:2011 Agricultural Machinery a. Subsoiler – Methods of Test b. Hand Pump – Methods of Test c. Granule Applicator – Methods of Test d. Mist Blower – Methods of Test

c. Granule Applicator – Methods of Test a. Subsoiler – Methods of Test (PAES 150) b. Hand Pump – Methods of Test (PAES 154) d. Mist Blower – Methods of Test (PAES 156)

Secondary tillage implement consisting of long and curved teeth made of spring steel which are fastened on the transverse toolbars with the other end pointed to give good soil penetration. a. Trailing spring-tooth harrow b. Harrowing c. Spring-tooth harrow d. Auger head/drill bit

c. Spring-tooth harrow

Four-wheel tractor speed limit on paved road in kph. a. 15 to 22 b. 15 to 20 c. 14 to 26 d. 8 to 15

b. 15 to 20 Paved Road / Bare Dirt Road 2-wheel = 8 to10 / 4 to 6 kph 4-wheel = 15 to 20 / 8 to 10 kph

Based on PAES 112: 2000 Lever-Operated Knapsack Sprayer, the flow rate from the nozzle using water and the nozzles provided, shall lie in the range of 0.3 to 1.4 L/min. at what mean pressure? a. 100 kPa b. 300 kPa c. 400 kPa d. 200 kPa

b. 300 kPa

Tillage of an entire area as contrasted to a partial tillage as in bands or strips. a. Deep tillage b. Broadcast tillage c. Rotary tillage d. Oriented tillage

b. Broadcast tillage

Tillage action and transport operations utilized to loosen, load, carry, and unload soil. a. Earthmoving b. Land grading c. Land forming d. Land planning

a. Earthmoving

PAES 128: 2002 drilling rig – methods of test, the drilling rig shall be operated for at least 100 mm diameter of bore hole and minimum depth of how many meters? a. 10 b. 20 c. 30 d. 40

c. 30

Tillage operation which move soil to establish a desired soil elevation and slope. a. Land grading b. Land forming c. Land planning d. Soil cultivation

a. Land grading

Tillage operation which are oriented in specific paths or directions with respect to the sun, prevailing winds, previous tillage actions, or field base lines. a. Deep tillage b. Broadcast tillage c. Rotary tillage d. Oriented tillage

d. Oriented tillage

Shallow tillage operation performed to promote growth of crop plants by creating a soil condition conducive to aeration, infiltration, and moisture conservation or to pest control. a. Earthmoving b. Land forming c. Land planning d. Soil cultivation

d. Soil cultivation

Mechanical manipulation of soil for any desired purpose. a. Precision tillage b. Conventional tillage c. Tillage d. Mulch tillage

c. Tillage

Based on PAES 124: 2002 walking-type agricultural tractor – Part 3: special type (float-assist tiller), what is the recommended noise emitted by the tractor measured 50 mm away from the operator’s ear level? a. Shall be more than 92 db (A) b. Shall be exactly 92 db (A) c. Shall not be more than 92 db (A) d. Shall be lesser than 92 db (A)

c. Shall not be more than 92 db (A)

Tillage, which constitutes the initial major soil-working operation, normally designed to reduce soil strength, cover plant materials, and rearrange aggregates. a. Secondary tillage b. Primary tillage c. Ridge tillage d. Conservation tillage

b. Primary tillage

Tillage, following primary tillage, which is designed to control weed growth and to create specific soil surface configurations before seeding. a. Precision tillage b. Secondary tillage c. Minimum tillage d. Primary tillage

b. Secondary tillage

System traditionally performed in preparing a seedbed for a given crop and grown in a given geographical area. a. Precision tillage b. Secondary tillage c. Minimum tillage d. Conventional tillage

d. Conventional tillage

System wherein least soil manipulation is performed. a. Precision tillage b. Secondary tillage c. Minimum tillage d. Conventional tillage

c. Minimum tillage

System in which tillage of the total soil surface is performed in such a way that plant residue is specifically left on or near the soil surface. a. Precision tillage b. Optimum tillage c. Primary tillage d. Mulch tillage

d. Mulch tillage

Implement which shatters the soil without complete burial or mixing of surface materials. a. Moldboard plow b. Spiral plow c. Chisel plow d. Rotary plow

c. Chisel plow

Implement which cuts, partially or completely inverts a layer of soil to bury surface materials, and pulverizes the soil. a. Row crop cultivator b. Roller-harrow c. Moldboard plow d. Rotary hoe

c. Moldboard plow

Tool attached to the shank of the subsoiler to cut through the soil. a. Soil abrasion b. Subsoiler c. Shank d. Ripper point

c. Shank

Series of hills in a field. a. Root-washed seedlings b. Rows c. Hills d. Soil-bearing seedlings

b. Rows

Scratching, cutting, or abrasing of materials caused by the action of soil. a. Soil abrasion b. Subsoiler c. Shank d. Ripper point

a. Soil abrasion

Lever that connects the pump rod to the pump head which often includes some mechanism to add counterweight to balance the weight of the water being lifted up the draw pipe. a. Handle b. Plunger/piston c. Pump stand/pedestal d. Pump rod/plunger rod

a. Handle

Part of the mist blower that connects the nozzle to the blower. a. Mounted mist b. Mist c. Backpack mist d. Wand

d. Wand

Part of the cylinder that is connected to the pump rod and which forces water up the draw pipe. a. Hand pump b. Plunger/piston c. Pump stand/pedestal d. Pump rod/plunger rod

b. Plunger/piston

Type of sugarcane planter that is capable of chopping sugarcanes into billets which are dropped into the furrows. a. Manual sugarcane planter b. Mechanical sugarcane planter c. Semi-automatic sugarcane planter d. Sugarcane planter

c. Semi-automatic sugarcane planter

Based on PAES 118: 2001 four-wheel tractor, what is the allowable wheel slip for maximum efficiency for two-wheel drive tractor at firm soil. a. 5-10% b. 7-11% c. 12-18% d. 10-20%

b. 7-11%

Eliminates back and dead furrows and is used for surface irrigation. a. Subsoiler b. Disc plow c. Roller-harrow d. Two-way plow

d. Two-way plow

Implement for intermittent tillage at depths sufficient to shatter compacted subsurface layers. a. Subsoiler b. Disc plow c. Roller-harrow d. Two-way plow

a. Subsoiler

Based on PAES 112: 2000 Lever-Operated Knapsack Sprayer Method of test, the pumping rate shall not exceed how many strokes/min? a. 10 b. 25 c. 30 d. 40

d. 40

Consists of two gangs wherein one gang is located behind the other at an angle and the harrow is operated in an offset position in relation to the tractor. a. Roller-harrow b. Offset disc harrow c. Spring-tooth harrow d. Single-action disc harrow

b. Offset disc harrow

Implement used for seedbed preparation which crushes soil clods and smooths and firms the soil surface. a. Row crop cultivator b. Roller-harrow c. Packer d. Rotary hoe

b. Roller-harrow

Based on PAES 118: 2001 four-wheel tractor, what is the allowable wheel slip for maximum efficiency for four-wheel drive tractor at tilled or soft soil. a. 15-21 b. 10-30 c. 18-25 d. 8-13

d. 8-13

Implement wherein the frame and cultivating tools are designed to adequately pass through standing crop rows without crop damage. a. Row crop cultivator b. Roller-harrow c. Packer d. Rotary hoe

a. Row crop cultivator

84. Machine used to apply, or to apply and incorporate soil additives by means of tillage. a. Soil-additive applicator b. Soil-additive incorporator c. Soil roller d. Soil-working surface

a. Soil-additive applicator soil-additive incorporator machine used to mechanically incorporate or mix material into the soil

Based on PAES 132: 2004 Disc/Moldboard Plow – Methods of Test, what is the required travelling speed during operation for four-wheel tractor-drawn plows? a. 3 kph to 6 kph b. 10 kph to 12 kph c. 8 kph to 9 kph d. 5 kph to 6 kph

d. 5 kph to 6 kph Disc Moldboard traveling speed 2-wheel = 3-4kph 4-wheel = 5-6kph

Portions of tillage tools which are designed to be in contact with the soil. a. Soil-additive applicator b. Soil-additive incorporator c. Soil roller d. Soil-working surface

d. Soil-working surface

Tillage tools which present a reasonable constant boundary area to the soil. a. Multi-powered tillage tools b. Soil abrasion c. Soil adhesion d. Mechanical impedance *no answer/NOTA

simple tillage tools tillage tools which present a reasonable constant boundary area to the soil multi-powered tillage tools (answer key) tillage tools powered by more than one form of power, such as draft and rotating power, or draft and electrical power

Scratching, cutting, or abrading of materials caused by the action of soil. a. Multi-powered tillage tools b. Soil abrasion c. Soil adhesion d. Mechanical impedance

b. Soil abrasion

Resistance to the movement of plant parts or tillage tools through soil that is caused by the mechanical strength of the soil. a. Multi-powered tillage tools b. Soil abrasion c. Soil adhesion d. Mechanical impedance

d. Mechanical impedance

PAES 160:2011 Agricultural Machinery a. Power Sprayer for Mango – Specifications b. Sugarcane Planter – Specifications c. Spring-tooth Harrow – Specifications d. Mechanical Rice Transplanter – Specifications

b. Sugarcane Planter – Specifications **Sugarcane Planter – Methods of Test (Even no.)

Type of soil auger that makes use of human force to drill the soil. a. Motor-powered b. Soil boring auger c. Fluid-powered d. Hand-operated type

d. Hand-operated type

PAES 155:2010 Agricultural Machinery a. Subsoiler – Methods of Test b. Hand Pump – Methods of Test c. Granule Applicator – Methods of Test d. Mist Blower – Methods of Test

d. Mist Blower – Methods of Test **Mist Blower – Specifications

Fine drops of liquid, such as water or chemical pesticide, sprayed into the air. a. Wand b. Mist c. Backpack mist d. Mounted mist

b. Mist

Type of soil auger that is powered by either pneumatic or hydraulic pump to drill the soil. a. Motor-powered b. Soil boring auger c. Fluid-powered d. Hand-operated type

c. Fluid-powered

PAES 162:2011 agricultural machinery a. Power sprayer for mango – methods of test b. Hand pump – methods of test c. Granule applicator – methods of test d. Soil auger – methods of test

d. Soil auger – methods of test

Type of granule applicator designed for handheld operation. It makes use of screw or spinner plate operated manually to facilitate metering of granules. a. Orifice b. Handheld granule applicator c. Spinner plate d. Granule applicator

b. Handheld granule applicator

Raised ridge left at the center of the strip of land, when plowing is started from center to side. a. Back furrow b. Furrow slice c. Furrow crown d. Dead furrow

a. Back furrow

Trench left when the plow bottom cuts and turns the furrow slice. a. Back furrow b. Furrow crown c. Furrow d. Dead furrow

c. Furrow

Sliding implement that cuts, lifts, inverts and throws to one side a layer of soil (furrow slice) to bury surface materials. a. Slatted moldboard b. Moldboard plow c. Plow bottom d. Sod moldboard

b. Moldboard plow

Based on PAES 116: 2001 small engine, the noise emitted by the engine measured 50 mm away from the operator’s ear level shall not be more than? a. 90 db b. 94 db c. 96 db d. 92 db

d. 92 db

Two-wheel tractor speed limit on bare dirt road in kph. a. 8 to10 b. 15 to 20 c. 4 to 6 d. 8 to 15

c. 4 to 6 Paved Road / Bare Dirt Road 2-wheel = 8 to10 / 4 to 6 kph 4-wheel = 15 to 20 / 8 to 10 kph

Based on PAES 133: 2004 disc harrow – methods of test, what is the travelling speed to be maintained during operation? a. 7 kph to 8 kph b. 9 kph to 10 kph c. 2 kph to 3 kph d. 5 kph to 6 kph

a. 7 kph to 8 kph

Type of weeder with rectangular, triangular or crescent shapes with cutting edges sharpened and hardened. a. Blade type b. Hand-held weeder c. Tine type d. Rotary type

a. Blade type

Type of weeder with a straight, curved, round or square cross-section steel rods with sharply pointed and hardened soil engaging ends. a. Blade type b. Hand-held weeder c. Tine type d. Rotary type

c. Tine type

Type of weeder which utilize either blade or tine type of soil working parts with short (0.15 m to 0.5 m), medium (>0.5 m to 1 m) and long (>1 m) handles. a. Animal- drawn weeder b. Power-weeder c. Hand-held weeder d. Push-type weeder

c. Hand-held weeder

Type of weeder which utilizes either blade, tine or rotary soil working parts for dry and wet field weeding. a. Animal- drawn weeder b. Power-weeder c. Tractor-mounted weeder d. Push-type weeder

d. Push-type weeder

Based on PAES 115: 2000 centrifugal, mixed flow and axial flow water pumps – methods of test the water to be used during the test shall be clean with a temperature range of? a. 10 – 40 ºC b. 20 – 70 ºC c. 30 – 80 ºC d. 40 – 90 ºC

a. 10 – 40 ºC

Type of weeder in which soil working parts are mounted on a frame or tool bar and pulled by an animal for dry field weeding. a. Animal- drawn weeder b. Power-weeder c. Hand-held weeder d. Push-type weeder

a. Animal- drawn weeder

Type of rotary weeder driven by its own engine for wet field weeding. a. Power-weeder b. Tractor-mounted weeder c. Hand-held weeder d. Push-type weeder

a. Power-weeder

Type of weeder in which soil working parts are mounted on a frame or tool bar and pulled by either two- or four-wheel tractor for dry field weeding. a. Animal- drawn weeder b. Power-weeder c. Tractor-mounted weeder d. Hand-held weeder

c. Tractor-mounted weeder

Type of granule applicator that uses wheel rotational motion to actuate application of granules. The granules are metered by a spinner plate or a screw attached to the ground wheel. a. Powered walk-behind type b. Trailing granule applicator c. Mounted granule applicator d. Three-point hitch type granule applicator

b. Trailing granule applicator

Type of knapsack granule applicator that makes use of gravitational force to apply granules. a. Mounted granule applicator b. Three-point hitch type granule applicator c. Mechanical walk-behind type d. Gravity knapsack

d. Gravity knapsack

Type of granule applicator that uses a spinner plate or a screw attached to the power take-off shaft to actuate metering of granules. a. Trailing granule applicator b. Mounted granule applicator c. Three-point hitch type granule applicator d. Mechanical walk-behind type

c. Three-point hitch type granule applicator

PAES 148:2010 Agricultural Machinery a. Soil Auger – Method of test b. Granule Applicator– Method of test c. Field Cultivator – Method of test d. Subsoiler– Method of test

c. Field Cultivator – Method of test

Power requirement of an implement being towed or pushed. a. Draft b. Drawbar horsepower c. Implement d. Drawbar power

d. Drawbar power

Ratio between the productivity of a machine under field conditions and the theoretical maximum productivity. a. Field efficiency b. Theoretical field capacity c. Effective field capacity d. Field capacity

a. Field efficiency

Horizontal distance perpendicular to the direction of travel between the outermost edges of the implement. a. Implement width b. Ground clearance c. Implement length d. Center of implement

a. Implement width

Unplowed soil at the end of the furrow strip. a. Root zone b. Seedbed c. Root bed d. Head land

d. Head land

Type of pump which combines some of the features of both centrifugal and the axial flow pump and in which head is developed partly by the centrifugal force and partly by the lift of the vanes on the water. a. Mixed flow pump b. Diffuser pump c. Turbine pump d. Mixed pump

a. Mixed flow pump

PAES 101 TO PAES 166 Flashcards

AGRICULTURAL MACHINERY - except images for field operation patterns (115 cards)