Part A of Video 2 & 3

Question 1

Plug In/ Instance will access?

Answer 1

Pop Up Plug-In View in the Displays

Question 2

What can you control on in the Plug In Menu

Answer 2

Master (whole project), Groups, Sounds (Tracks)

Question 3

Preform/FX Select can be controlled by?

Answer 3

4D Encoder

Question 4

Polyphony? (Sampler)

Answer 4

Determines how much samples can lay on each other.

Question 5

Legato or 1?

Answer 5

will chop the sample when multiple are played together

Question 6

Page 2 of the Sampler has

Answer 6

Start Point, Tune, Reverse Sample, Type (How MA3 trigger your samples)

Question 7

What type of modes does can MA3 trigger your samples?

Answer 7

One Shot: Play to the end. ADSR: paly only when touching pad + customize ADSR. AHD; attack. hold, and decay

Question 8

Page 3 of the Sampler has?

Answer 8

Compressor, Drive; saturating sound SFX, SR; bit reduction, BUS, EQ Filters

Question 9

Pages 3-6 contain what?

Answer 9

Modulation, Envelops. Velocity, IFO Settings, Possible Destinations

Question 10

Page 1 (sample) has what?

Answer 10

Engine: allows you to allows you to emulate old/vintage samplers

Question 11

Engine has what emulations and what do they sound/do?

Answer 11

MP60: gritty. SL200: pure sound

Question 12

What happens when use a more gritty sound?

Answer 12

The sound of the grittiness of a sound will increase when your lower down the pitch/tune.

Question 13

Sampling Button allows to see? And what can you do?

Answer 13

To see the waveform at the sample. You can also edit the waveform.

Question 14

What buttons do you use to switch between selection range & to play different range? (sample)

Answer 14

Page

Question 15

Loop can be customized where?

Answer 15

Step Mode

Question 16

You can change what parameters in Step Mode?

Answer 16

Gate/Loop, Fade, Tune, Pitch bend, Engine, Tempo Length

Question 17

Gate in Step Mode does what?

Answer 17

Gate Mode only allows the sound to play after the pad is touched.

Question 18

How can you access the MA3 Internal VST instruments?

Answer 18

Tap/Hold 4D Encoder while “Plugin” Mode

Question 19

Variation Button?

Answer 19

Randomize that are able to give out melodies from scratch.

Question 20

How can you access the Randomizer/Humanizer?

Answer 20

Variation Button on the Function Lane

Question 21

Probability and Note Range do in Randomizer?

Answer 21

Probability: determines amount of notes that are going to be created inside of your pattern. Note Range: Defines the range where notes will be picked from Low to High Note

Question 22

Auto Snap does what? (Slicing Mode)

Answer 22

Allows all slices.

Question 23

Decet Mode does what? (Slicing Mode)

Answer 23

auto slices the samples.

Question 24

Split Mode? (Slicing Mode)

Answer 24

defines # of slices equally slicing up

Question 25

Grid Mode does what? (Slicing Mode)

Answer 25

Same as Split Mode but slices on note grid

Question 26

How can you slice a sample? (Slicing Mode)

Answer 26

You can use the pads to slice IRL the waveform

Question 27

What can you do with the Quick Edit Section?

Answer 27

Tune, Volume, Swing, Tempo, Position can all be used in this section.

Question 28

What does Lock Snapshots do?

Answer 28

Locks the parameters you have on your project.

Question 29

How can you save different locked snapshots?

Answer 29

Shift + "Lock" button. Choose an empty pad to save the locked snapshots?

Question 30

What does the Mixer Button do?

Answer 30

Mixer displays of group & sound channels/overview.

Question 31

On Mixer button, what does 4D Encoder do?

Answer 31

Down: to access induvial sounds channels in a single group. Left and Right: to see all other groups or top tracks. Pressing/Holding 4D Encoder access panning parameters.

Question 32

How can you access panning parameters?

Answer 32

Mixer Mode. Pressing/Holding the 4D Encoder access the panning parameter on selected master, group, and sounds.

Question 33

How can you add plug-ins?

Answer 33

"Browser/Plug In" & "Effect" category.

Question 34

How can you move the location of a Plug-In in a Plug-In chain?

Answer 34

"Shift" + "4D Encoder" to move the location of the Plug-in in a chain?

Question 35

How can you send Aux Sends on MK3?

Answer 35

1. Choose any empty pad/sound 2. Choose Plug-In you want to Aux Send 3. Color Code It (Uncommon Color to recognize it) 4. Select Group or Sound (Track) 5. Switch to "Channel/Midi" button mode 6. Top Button 5 & 6 to move it "output" page 7. Switch Page 2 8. Choose Aux's Destination & Choose the empty track plug-in. 9. Choose the input from Aux Sends

Question 36

How can you hold "Auto Lock Mode"

Answer 36

Shift + Lock button

Question 37

How to make scenes?

Answer 37

Create Scenes by putting them in groups and creating different scenes.

Question 38

What does link do?

Answer 38

Link customizes different pads to play together when one is played.

Question 39

How can you use link function?

Answer 39

Pad Mode Choose Link # Choose pads for Link #

Question 40

Choke does what?

Answer 40

Customize different pads to never play together: the same process and link but choke menu instead

Question 41

Humanizer does what?

Answer 41

Humanizer will move the notes back & forth; giving it a human touch. Randomizing Velocity Settings.

Question 42

How can you add live effects to vocals?

Answer 42

Connect Mic "Channel/Midi" Input Use 4D Tapper Insert