Patch Bay Vocab Flashcards
Mic Lines
Patch Bay access to the signal coming from the wall mic panel. Signal from this point must be routed to a preamp to boost a signal.
API Channel Mic In
Input section to the API console mic preamps
API Channel Line In
Line Level input to the API mic pre
UA Line In
Line Level Input to the Universal Audio 710 Mic Pre’s
UA 710 Mic In’s
Microphone level input to the UA 710 mic preamps
Channel Insert Sends
Patchbay access to the ‘insert section’ of the API CHANNEL PATH.
This patch point is used to route signal to outboard processing.
NOT TO BE CONFUSED WITH THE ‘SENDS SECTION’
Channel Insert Return
This patch point allows the processed signal to return back to the channel path after it has been processed
Direct Output
This patch point allows us to route signal directly out of the API input section.
UA 710 Line Out
Line Level Outputs for the UA 710 mic pre’s
Aux/ Cue Output
Line Level Outputs for the UA 710 mic pre’s
Neve Direct Out
Line Level Outputs from the Neve 1073 preamp
Aux/ Cue Output
Patch Bay access to the console ‘sends section’
Pro Tools Inputs
Direct in to the inputs in Pro Tools
Pro Tools Outputs
Direct outs from the outputs in PT
2 Track Inputs
Used for any miscellaneous sources
Avalon 2055 in
This Patch point allows input to the Avalon 2055
Avalon 2055 out
output of the Avalon Ad 2055
Titan In
Input to the Dave Hill Designs Titan
Titan out
Output to the Dave Hill Designs Titan
DBX 160 in
Input to the DBX 160 compressor
DBX 160 Out`
Out of the DBX 160
T.C.D Two in
These Patch Points allow input to the TC D Two. Usually receives signal from the ‘sends’
T.C.D Two out
Output of the D Two
Program Out
Stereo output for the console 9 (stereo buss)
