PG 110

Question 1

What department maintains the units master library of all applicable tech pubs and directives?

Answer 1

QA

Question 2

What department participates in FV checks and test flights?

Answer 2

QA

Question 3

What department ensures that a hydraulic surveillance program is in place and testing is being performed?

Answer 3

QA

Question 4

Who shall select and designate QA inspectors in writing?

Answer 4

Engineering officer

Question 5

Who signs off all grounding discrepancies and flight control work?

Answer 5

Primary QA

Question 6

What kind of QA inspector is assigned from a maintenance shop?

Answer 6

Collateral

Question 7

When can a collateral QA sign off grounding discrepancies and flight control work?

Answer 7

Needs to be approved by a supervisor possessing maintenance release authority.

Question 8

What three general causes attribute to FOD?

Answer 8

Poor housekeeping, poor maintenance practices, and carelessness

Question 9

Who shall promulgate local instructions stressing the need to reduce FOD?

Answer 9

Engineering officer

Question 10

What program monitors the condition of enclosed mechanical systems through determination of wear metal concentrations in the lubricating fluid?

Answer 10

JOAP

Question 11

Who provides the funds for USCG participation in the JOAP?

Answer 11

CG-41

Question 12

Who ensures that maintenance personnel are thoroughly trained in JOAP sample taking and documentation procedures?

Answer 12

Engineering officer

Question 13

What aircraft participates in SOAP and who is it performed by?

Answer 13

HU-25

Performed by Honeywell

Question 14

What manual has specs for SOAP?

Answer 14

ATF3-6 maintenance manuals

Question 15

What causes erratic or incorrect fuel quantity indications; icing of filters; engine failure caused by fuel control icing; and jet engine starting difficulties caused by fuel flow dividers clogged from corrosion in aircraft fuel systems?

Answer 15

Free water and contaminants

Question 16

How much fuel should be taken for fuel samples?

Answer 16

One pint

Question 17

When should fuel samples be taken?

Answer 17

Before the first scheduled flight of the day.

Question 18

How long shall fuel samples be kept for?

Answer 18

24 hours

Question 19

What shall be used to ensure that engines will not be susceptible to fuel starvation due to ice in the fuel system?

Answer 19

Fuel System Icing Inhibitor, MIL-DTL-85470B

Question 20

What is the level by volume for FSII?

Answer 20

0.07-0.15 percent by volume

Question 21

At least how long should dehumidification be on aircraft?

Answer 21

At least 8 hrs per day

Question 22

What is the primary directive for CG involvement in the JOAP?

Answer 22

NAVAIR 17-15-50.1

Question 23

The use of artificial dehumidification has shown to reduce avionics dispatch failure rates by what percentage?

Answer 23

40 percent

Question 24

What is the Corrosion Control Program Process Guide?

Answer 24

CGTO PG-85-00-60

Question 25

What department OVERSEES the CG Aviation TEMPEST Program?

Answer 25

CG-41

Question 26

Who manages the CG Aviation TEMPEST policy as directed by the CG-41?

Answer 26

ALC

Question 27

What form is used for unit Maintenance Instructions?

Answer 27

OPNAV 4790/35

Question 28

How long should a Maintenance Instruction be filed for after completion?

Answer 28

6 months

Question 29

Aviation tools will be of what quality?

Answer 29

Society of Automotive Engineers (SAE) Aerospace Standards (AS-954)

Question 30

What is the Safety and Environmental Health Manual?

Answer 30

COMDTINST M5100.47

Question 31

The role of an Aviation Gas Free Engineer Will normally be?

Answer 31

The QA Officer, Assistant Engineering Officer, or Maintenance Officer

Question 32

How frequent should confined space training be accomplished by the AVGFE?

Answer 32

Annually

Question 33

The AVGFE should maintain all reports and logbooks for how long?

Answer 33

3/three years

Question 34

How long is a AVGFET certification valid for?

Answer 34

1 year or one year

Question 35

What is the Technical Airworthiness Assurance Program Process Guide?

Answer 35

CGTO PG-85-00-70

Question 36

What are some composite repairs that Field units can do?

Answer 36

1. Maintain aircraft component structure 2. Maintain equipment for applicable aircraft. 3. Perform authorized composite repairs IAW maintenance pubs: cosmetic repairs, structural repairs to tertiary and secondary structures. Primary structure repair require ALC approval. 4. 65 float container repairs require ALC approval. 5. Temp repairs.

Question 37

Metal hood type guards shall enclose how much of an abrasive wheel?

Answer 37

2/3 of the abrasive wheel

Question 38

What distance should a tool rest be from an abrasive wheel grinding surface?

Answer 38

Minimum of 1/8”

Question 39

Nickel-cadmium battery shops need to have how many air changes per hour?

Answer 39

Three to four air changes per hour

Question 40

The clearance between sealed lead-acid batteries and sealed nickel-cadmium batteries should a minimum of how many feet?

Answer 40

5

Question 41

At what temperature would it be necessary to add water to the affected cells of a battery?

Answer 41

If it Reaches 115 degrees

Question 42

What should a sign read where batteries are charged?

Answer 42

SEALED BATTERY SERVICING AREA

Question 43

The battery workspace air temperature should be what?

Answer 43

77.5 degrees F (+7.5 degrees F)

Question 44

All electrical equipment will be positioned how high above the floor level in hangars?

Answer 44

At least 18 inches

Question 45

When will Priority 5 requisitions from ALC be sent to units?

Answer 45

More than TWO parts on shelf

Question 46

When will Priority 12 requisitions be sent from ALC to units?

Answer 46

More than FIVE parts

Question 47

How long do air stations retain material request forms?

Answer 47

Current plus 3 fiscal years

Question 48

What is the Parts and Material Request/Use Form number?

Answer 48

CG-4491

Question 49

When shall Type 1 material be shipped upon receipt of shipping orders?

Answer 49

Not later than 15 days

Question 50

When should material be shipped back to ALC upon removal from service?

Answer 50

Within 15 days