Questions

Question 1

1. For evaluation purposes during emplacement, when does the time start?

Answer 1

C). When CM1 maneuvers the ECS truck to designated position at marker stake.

Question 2

2. According to the emplacement crew drill, for what reason can CM3 skip step 5?

Answer 2

B). If corner reflectors are to be used

Question 3

3. Which crew member notifies EPP crew that the ECS is ready for prime power?

Answer 3

A). CM1

Question 4

4. During march order, who receives and confirms the march order with the ICC?

Answer 4

B. CM2

Question 5

5. What method of training should be used during MO&E?

Answer 5

B. Crawl walk run

Question 6

6. What table covers PMCS for the ECS system?

Answer 6

A. Table 1

Question 7

7. What equipment modulates or demodulates signals, provides line interface for both transmitted and received data?

Answer 7

​(B). Baseband Unit (BBU)

Question 8

8. What equipment is a receiver/transmitter assembly that contains a power supply, controller, Band III+ diplexer, receiver downconverter, transmit converter, an antenna connection, and an inter-unit connection?

Answer 8

A). Radio Frequency Unit (RFU)

Question 9

9. What data rate is used in the Patriot configuration?

Answer 9

D. 576kbs

Question 10

10. During a VSWR test, what reading should be displayed for transmission quality?

Answer 10

C. Less than 12%

Question 11

11. How many KIV-7Ms are in the ECS?

Answer 11

C. 4

Question 12

12. Which alert states require full manning?

Answer 12

B. 1-4

Question 13

13. Which alert states require ALL AVAILABLE commo?

Answer 13

B). 1-4

Question 14

14. Which alert state(s) require UHF/FM commo?

Answer 14

C. 5

Question 15

15. Which alert state(s) require only FM commo?

Answer 15

D. 6,7,0

Question 16

16. Who identifies the minimum number of launchers required in the appropriate column under LS State?

Answer 16

B. Controlling authority

Question 17

17. Define WCS Hold.

Answer 17

(A). Units may only fire in self-defense or when ordered by proper higher authority.

Question 18

18. Define WCS Tight.

Answer 18

B). Only targets positively identified as hostile may be engaged.

Question 19

19. Define WCS Free.

Answer 19

C). Any target not positively identified as friendly may be engaged.

Question 20

20. How are STO’s numbered?

Answer 20

B). STOs are numbered sequentially, starting at 0001Z daily. If the originator of the STO changes, the new originator will begin numbering with 001.

Question 21

21. In the STO, the Alert State is indicated by ___?

Answer 21

(B). Number of launchers in operate, standby and local or any combination placed in directed alert State

Question 22

22. The Remarks entry of the STO is used for ____?

Answer 22

(A). Information or instructions from higher not covered in the five standard lines and preamble.

Question 23

23. Which are the basic methods of disseminating an ACMAF?

Answer 23

(A). Digital and manual

Question 24

24. What is a valid ACMAF number if today is May 14th?

Answer 24

(A). 14A

Question 25

25. When will an ABT report be sent?

Answer 25

C). Within 30 minutes of initial engagement or upon request

Question 26

26. Which report will you use to report your operational missiles by type?

Answer 26

D). SAMSTAT REP

Question 27

27. What type of report is sent when the operator notices jamming of the radar?

Answer 27

B). MIJI

Question 28

28. When will an TBM report be sent?

Answer 28

C). Within 30 minutes of initial engagement or upon request