Brainscape's Knowledge GenomeTM


Top Flashcards (Certified)
All Flashcards

CDC-B > Random > Flashcards

Random Flashcards

(80 cards)

Start Studying
1
Q

What safety precaution must you take before installing or changing a drill bit of an electric drill??

A

Remove or disconnect the drill from the power

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

What do you do before drilling in metal or other hard surfaces?

A

Use a center punch to mark the exact center of the hole to be drilled

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

What minimum personal protective equipment shall be used for all jobs using a bench grinder?

A

Eye and face protection

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

How fast should an electric saw blade be spinning before it’s contacts the material to be cut?

A

At full speed

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

List four safety precautions when dealing pneumatic tool?

A
  1. Inspect the air hose for cracks
  2. Open control valve momentarily
  3. Stop flow of air to a pneumatic tool
  4. Non pneumatic accessories
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

How many psi are used for safe efficient operation of a pneumatic tool?

A

90 psi

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

What ensures the socket or attachment does not fly off an impact wrench?

A

Spring loaded ball bearing or socket lock

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

What does the torque regulator do for a pneumatic impact wrench?

A

Reduces the possibility of shearing or damaging threads when installing nuts and bolts

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

Familiarity of what two things are prerequisites for safe operation of lifting devices?

A

The manual and equipment to be used

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

What will be worn if there is a potential for injury from falling objects or moving equipment?

A

Protective helmets and safety toe boots

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

What are four items that can be used in conjure with wire ropes slings when lifting munitions?

A
  1. Forklift
  2. Jammer
  3. Overhead hoist
  4. Crane
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

Where can general guidance be found for safe operating produces using lifting devices?

A

AFI 91-203; the specific manual for the lifting devices

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

What information do the multimeters annunciators display?

A

Range and hold

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

What mode of the fluke 8025 series multimeter is most useful when taking measurements in a circuit where it may be necessary to keep your eyes on the test leads after they are positioned?

A

Hold mode

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

State the max load capacity of mhu 141 trailer?

A

5500lbs

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

Which TO contains information on the mhu 141 trailer?

A

TO 35D3-2-27-1

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

What is the turning radius of the mhu 141 trailer?

A

200 inches or 40 degree in either direction

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

Explain the purpose of a breakaway cable on the mhu 141 trailer

A

It’s an added safety feature to stop the trailer in the event of an accident breakaway

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

State the maximum load capacity of the mhu 110 trailer?

A

15,000lbs

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

Which TO contains information on the mhu 110 trailer?

A

TO 35D3-2-26-1

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q

What allows you to stow the town at of an mhu 110 trailer in a vertical position?

A

A spring loaded latch on the front axle

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q

What is the primary brake system for the mhu 110 trailer ?

A

Hydraulic/surge brake

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
23
Q

What is the max load capacity of the mhu 226 trailers?

A

12,000lbs conventional loads

8,000lbs for nuclear

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
24
Q

How many openings are on the deck of the mhu 226 trailer?

A

3

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
25
How many storage boxes are on the mhu 226 trailer?
5
26
What is the mhu 226 equipped with that aids in having a tighter steering radius?
Four wheel steering - double Ackerman
27
Name the three types of trailer you may encounter
Vans closed Flat bed open Rollerized
28
What is the actual length of a 40 ft trailer when you include the goose neck?
51ft
29
The rollerized trailer is designed for what specific purpose?
To handle cargo loaded on 463L aluminum aircraft pallets
30
Who has the responsibility to detect deficiencies on trailers ?
The using vehicle operators
31
What is a transport module and how is it used for the 2w0x1 career field?
Essentially a large container designed to secure a top the 141 226 or 110 trailers for transport of small built up munitions
32
What is the max transport capacity of the BDU 33/mk 106 transport module?
40 or 80 rounds
33
When loading or unloading any module what common safety practice is an absolute necessity?
Positive, two handled control of munition
34
What should you do to ensure transport module doors remains closed to prevent munitions from falling out?
Ensure the safety pins or latches are engaged after loading and periodically check these devices between stops
35
What type of times will personnel usually load and unload onto fighter or bomber aircraft using lift trucks?
Munitions and suspension equipment
36
Which wheels on the lift truck are steerable?
Two rear wheels
37
What is the standard lifting capacity of the mj-1 lift truck?
3,000 lbs
38
Explain the major difference between hydrostatic and automatic transmission
The automatic can roll in gear whereas the hydrostatic will not move unless the operator actuated the necessary controls
39
What allows you to operate the hydraulic system of the mhu-83 if the engine or hydraulic pump fails?
Using the hand pump
40
What particular fine adjustments would came whatever is loaded to slope or lean using the book position controls of an mhu83
Tilt
41
What is the max capacity of an mhu 83 loft truck using the fork adapter assembly?
6,000lbs
42
Which TO covers the rapid assembly and inspection procedures of nonnuclear munitions?
11A-1-63
43
What is the minimum number of feet required to assemble the A/E32K-3 munitions assembly conveyor?
50 x 100
44
Why is it important to monitor net explosive weight during a bomb buildup operation?
If ignited excessive new may cause propagation of an explosive from one location to another
45
When packing up the munitions assembly conveyor it is important to cap the end of the air hoses to keep...
Foreign materials from damaging them
46
Which subassembly on the UALS replenished assembly prevents accidentally loading a spent cartridge into the loader assembly?
Empty space preclusion device
47
Which tool can initiate cycling ammunition through the UALS replenished manually?
1/2 inch speed wrench
48
What happens to I fired rounds returning from the loader when the linkers ammunition is being processed?
Automatically downloaded through the second gate in the bottom of the replenisher
49
Which 30 mm cannon is internally mounted in the a-10?
Gau-8/a
50
Which 30 mm ammo loading system is used to service the gpu-5/a gun pod?
GFU-10/E
51
Which component of the munitions assembly conveyor can be used as a forklift adapter to raise the gantry to full height?
Interface control board
52
What is the weight capacity of the pneumatic hoists that are attached to the Gentry’s I beam of the munitions assembly conveyor?
4,000? (-3) 6,000 (-9)
53
The triple bomb bar is fitted with bomb slings and is used with each hoist to provide for lifting...
Three 500 pound munitions at a time or two 2,000 lbs munitions items
54
What USAF gun system is loaded and unloaded by the Linkless Ammunition Loading system?
The m61a1, 20mm cannon
55
Which weapons replaceable assembly of the linkless ammo loading system has no moving parts?
Storage container
56
Which subassembly of the UALS houses a remaining indicator window that provide the means to visually determine the appropriate number of rounds in the unit?
Outer drum
57
Which subassembly of the UALS provides the means to load live rounds into aircraft gun system?
Interface unit
58
Which subassembly of the UALS provides the power that cycles the rounds through the system?
Pneumatic regulators
59
How often should UALS replenisher assemblies be inspected?
Every 30?days when I’m use and annually when in storage
60
What is the maximum amount of pounds the MB-4 aircraft towing can tow and push?
140,000
61
Pointless safety locking pins must remain attached to pointless assembly
To prevent an unsecured pin from coming out and getting lost
62
What gear range should be selected in a tractor with an automatic transmission while going downhill?
Low range
63
What is the purpose of the trailer hand valve?
Test the trailer brakes
64
What are the hose couplers used for on trailer tractor combo?
To connect the service and emergency brake airlines front the tractor to the trailer
65
Which procedure is not a considerations for backing a trailer tractor combo
Turn toward the passengers side
66
What is the maximum depth of water you may drive a rough terrain forklift through?
Five feet
67
What is the most beneficial attributes of using the swing mast forklift
Allows you to maximize the availabile storage space
68
With the forks level what is the maximum reach of the variable reach forklift
22 feet
69
What is the lifting capacity of the MJ-1 series lift truck?
3,000 pounds
70
What is the lifting capacity of the mhu 83 series lift truck?
7,000 pounds
71
When using the mhu 83 series lift truck with fork adapters you immediately...
Reduce its lifting capability by 1,000 pounds
72
What happens when you release the accelerator pedal on a vehicle driven with a hydrostatic transmission?
The unit coasts to a very quick stop
73
What is the primary drawback to using the hydraulic hand pump to build hydraulic pressure
Extremely slow way to build a hydraulic pressure
74
How is the yaw positioning front the cradle or boom controls of an mj-1 lift truck adjusted?
Manually
75
What category or categories are Air Force air compressors classified?
High or low pressure
76
The primary difference between a bobtail and a pickup truck is the...
No tails back end is shortened by about one half
77
What is the purpose behind good operator maintenance of all assigned vehicles?
Maintain vehicle serviceable at reduced costs
78
How many opening are on the deck of the mhu 226 trailer?
Three
79
What type of steering aids the mhu 226 in a tighter steering radius?
Four wheel double Ackerman
80
After 463L pallets are positioned on a rollerized trailer what can you use to secure the pallets to the trailer?
MB-1 chain assemblies and or tie downs straps

CDC-B (1 decks)

Brainscape helps you reach your goals faster, through stronger study habits.
© 2025 Bold Learning Solutions. Terms and Conditions