Recquired Practick 2 : Neutralisation

Question 1

How could you find out the volume of sulfuric acid that will exactly neutralise 25cm 3 of sodium hydroxide solution ?

Answer 1

-Place exactly 25cm 3 of sodium hydroxide in a conical flask on a white tile, using a puppeteer and pipette filler
-Clamp the burette above the conical spa flask and fill it with sulfuric acid using a funnel, filling the burette to 0.00cm3 line
-Add 5-10 drops of phenolphthalein to the conical flask
-Slowly add the sulfuric acid to the flask , swirling the flask at the same time
-Close the burette tap as soon as the mixture turns from pink to colourless
-Record the final volume of sulfuric acid added

Question 2

List the apparatus required to carry out titration

Answer 2

-Burette
-Comical flask
-Pipette and pipette filler
-Funnel
-Clamp and stand
-White tile

Question 3

Why should a white tile be used in a titration experiment ?

Answer 3

The white tile is placed under the reacting mixture , making the colour change easier to see.

Question 4

Why might a volumetric pipette and pipette filler be used to measure 25cm3 rather than a measuring cylinder ?

Answer 4

A volumetric pipette will measure 25cm3 more accurately so it is usually sed for titrations

Question 5

What is the purpose of repeating a titration ?

Answer 5

To allow a mean titre to be calculated, reducing the effect of random error

Question 6

What colour phenolphthalein in acid and alkali ?

Answer 6

Acid - colourless
Alkali- pink

Question 7

Why is the first trial in a titration often called a ‘rough’ trial ?

Answer 7

The first trial gives and approximate idea of where the end point is so then for the further titres you can be more precise as you know approximately what volume will be required for neutralisation

Question 8

What safety precautions should be undertaken when carrying out titration ?

Answer 8

-Wear eyewear and be aware of the dangers of the chemicals used , e.g H2SO4 is corrosive , NaOH is an irritant
-The burette should be filled below eye level so there’s no risk of it spilling and splashing your face
-Any broken glassware needs to be cleared immediately

Question 9

Why are brutes used for titrations ?

Answer 9

Burnett allow the solution to be added drop by drop in very small quantities

Question 10

Apart from phenolphthalein, what other indicator could be used in a titration ?

Answer 10

Methyl Orange: Red (acid) to yellow (alkali)
Litmus Blue : Red (acid) to blue (alkali)

Question 11

If you know the volume of acid required to neutralise an alkali, how could you calculate the concentration of the acid, given the alkali concentration and volume?

Answer 11

-Calculate the number of moles of the alkali using the known volume and concentration
-Use the chemical equation to work out the ratios of acid and alkali that react hence work out how many mole of acid have reacted
-Divide the moles of acid by the volume used
neutralisation

Question 12

If you know the concentration of an acid in mol/dm3 how could you convert this to g/dm3 ?

Answer 12

Multiply the concentration in mol/dm3 by the molar mass (Mr) of the acid to give the value in g/dm3