Brainscape's Knowledge GenomeTM


Top Flashcards (Certified)
All Flashcards

NQF4 - Electrician > Regulations > Flashcards

Regulations Flashcards

(125 cards)

Start Studying
1
Q

BS 1363-2

A

13 A plugs, socket-outlets, adaptors and connection units.
Specification for 13 A switched and unswitched socket-outlets.

It is a British Standard that provides specifications for 13A switched and unswitched socket-outlets. It’s part of a larger series (BS 1363) that covers various aspects of UK electrical plug and socket-outlet systems. This standard focuses on safety, performance, and interchangeability of these socket-outlets.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

IEC 60664-1

A

Insulation coordination for equipment within low-voltage systems
Part 1: Principles, requirements and tests.

IEC 60664-1 is an international standard focusing on insulation coordination for electrical equipment within low-voltage systems. It outlines the principles, requirements, and testing methods for ensuring safe insulation levels in such systems. Specifically, it covers equipment with a rated voltage up to AC 1,000 V or DC 1,500 V. This standard applies to frequencies up to 30 kHz and equipment used up to 2,000 meters above sea level, with guidance provided for higher altitudes

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

IEC 60695-2-10

A

Fire hazard testing � Part 2-10: Glowing/hot-wire based test methods � Glowwire apparatus and common test procedure.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

IEC 61557-8

A

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. � Equipment for testing, measuring or monitoring of protective measures � Part 8: Insulation monitoring devices for IT systems.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

IEC/TR 62066

A

Surge overvoltages and surge protection in low-voltage a.c. power systems � General basic information. UL 508, Industrial control equipment.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

MOSA

A

The Machineries and Occupational Safety Act of 1983.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

MOSA & SANS 1014 1-2

A

The installation shall in total comply with the Machinery and Occupational Safety Act as amended, the requirements of the local supply authority and the SANS Code of Practice 10142 for the Wiring of Premises, Parts 1 & 2.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

SANS 10086-1

A

The installation, inspection and maintenance of equipment used in explosives atmospheres � Part 1: Installations including surface installations on mines.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

SANS 10089-2

A

The petroleum industry � Part 2: Electrical and other installations in the distribution and marketing sector.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

SANS 10103

A

The measurement and rating of environmental noise with respect to annoyance
and to speech communication

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

SANS 10108

A

The classification of hazardous locations and the selection of apparatus for use in such locations.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

SANS 1012

A

Electric light dimmers.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

SANS 10142-1

A

The Wiring of premises Part 1 Low Voltage Instalations

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

SANS 10142-2

A

The Wiring of premises Part 2 Low Voltage Instalations: Medium voltage instalations above 1Kv A.C not exceeding 22Kv A.C and up to and including 3MVA installed capacity.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

SANS 10198-10 (SABS 0198-10)

A

The selection, handling and installation of electric power cables of rating not exceeding 33 kV � Part 10: Jointing and termination of paper-insulated cables.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

SANS 10198-11 (SABS 0198-11)

A

The selection, handling and installation of electric power cables of rating not exceeding 33 kV � Part 11: Jointing and termination of screened polymericinsulated cables.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

SANS 10198-14 (SABS 0198-14)

A

The selection, handling and installation of electric power cables of rating not exceeding 33 kV � Part 14: Installation of aerial bundled conductor (ABC) cables.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

SANS 10198-4

A

The selection, handling and installation of electric power cables of rating not exceeding 33 kV � Part 4: Current ratings.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

SANS 10199

A

The design and installation of earth electrodes.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

SANS 10222-3

A

Electrical security installations � Part 3: Electric security fences (non-lethal).

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q

SANS 10292 (SABS 0292)

A

Earthing of low-voltage (LV) distribution systems.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q

SANS 10313

A

Protection against lightning � Physical damage to structures and life hazard.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
23
Q

SANS 1063

A

Earth rods, couplers and connections.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
24
Q

SANS 1065-1 (SABS 1065-1)

A

Metal conduits and fittings (screwed-end and plain-end) for electrical wiring � Part 1: Metal conduits. (Superseded by SANS 61386-1 and SANS 61386-21.)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
25
SANS 1065-2(SABS 1065-2)
Metal conduits and fittings (screwed-end and plain-end) for electrical wiring � Part 2: Metal fittings. (Superseded by SANS 61386-1 and SANS 61386-21.)
26
SANS 1085
Wall outlet boxes for the enclosure of electrical accessories.
27
SANS 1091
National Colour Standard.
28
SANS 1195
Busbars.
29
SANS 121
Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods
30
SANS 1213
Mechanical cable glands.
31
SANS 1239
Plugs, socket-outlets and couplers for industrial purposes.
32
SANS 1411-1
Materials of insulated electric cables and flexible cords � Part 1: Conductors.
33
SANS 1418-1
Aerial bundled conductor systems � Part 1: Cores.
34
SANS 1433-1
Electrical terminals and connectors � Part 1: Terminal blocks having screw and screwless terminals.
35
SANS 1433-2
Electrical terminals and connectors � Part 2: Flat push-on connectors.
36
SANS 1473-1
Low-voltage switchgear and controlgear assemblies � Part 1: Type-tested, partially type-tested and specially tested assemblies with a rated short-circuit withstand strength above 10 kA
37
SANS 1507-1
Electric cables with extruded solid dielectric insulation for fixed installations (300/500 V to 1 900/3 300 V) � Part 1: General.
38
SANS 1507-2
Electric cables with extruded solid dielectric insulation for fixed installations (300/500 V to 1 900/3 300 V) � Part 2: Wiring cables.
39
SANS 1507-3
Electric cables with extruded solid dielectric insulation for fixed installations (300/500 V to 1 900/3 300 V) � Part 3: PVC distribution cables.
40
SANS 1507-4
Electric cables with extruded solid dielectric insulation for fixed installations (300/500 V to 1 900/3 300 V) � Part 4: XLPE distribution cables.
41
SANS 1507-5
Electric cables with extruded solid dielectric insulation for fixed installations (300/500 V to 1 900/3 300 V) � Part 5: Halogen-free distribution cables.
42
SANS 1507-6
Electric cables with extruded solid dielectric insulation for fixed installations (300/500 V to 1 900/3 300 V) � Part 6: Service cables.
43
SANS 152(SABS 152)
Low-voltage air-break switches, air-break disconnectors, air-break switch-disconnectors, and fuse-combination units. (Superseded by SANS 60947-3.)
44
SANS 1524-1
Electricity payment systems � Part 1: Prepayment meters.
45
SANS 156
Moulded-case circuit-breakers
46
SANS 1574-3
Electric flexible cores, cords and cables with solid extruded dielectric insulation � Part 3: PVC-insulated cores and cables.
47
SANS 1574-5
Electric flexible cores, cords and cables with solid extruded dielectric insulation � Part 5: Rubber-insulated cores and cables.
48
SANS 1607 (SABS 1607)
Electromechanical watt-hour meters. (Superseded by SANS 62053-11.)
49
SANS 1619
Small power distribution units (ready-boards) for single-phase 230 V service connections.
50
SANS 164-0
Plug and socket-outlet systems for household and similar purposes for use in South Africa � Part 0: General and safety requirements.
51
SANS 164-1
Plug and socket-outlet systems for household and similar purposes for use in South Africa � Part 1: Conventional system, 16 A 250 V a.c.
52
SANS 164-2
Plug and socket-outlet systems for household and similar purposes for use in South Africa � Part 2: IEC system, 16 A 250 V a.c.
53
SANS 164-3
Plug and socket-outlet systems for household and similar purposes for use in South Africa � Part 3: Conventional system, 6 A 250 V a.c.
54
SANS 164-4
Plug and socket-outlet systems for household and similar purposes for use in South Africa � Part 4: Dedicated system, 16 A 250 V a.c.
55
SANS 164-5
Plug and socket-outlet systems for household and similar purposes for use in South Africa � Part 5: Two-pole, non-rewirable plugs, 2,5 A 250 V a.c., with cord, for connection of class II equipment.
56
SANS 164-6
Plug and socket-outlet systems for household and similar purposes for use in South Africa � Part 6: Two-pole systems, 16 A 250 V a.c., for connection of class II equipment.
57
SANS 1765
Low-voltage switchgear and controlgear assemblies (distribution boards) with a rated short-circuit withstand strength up to and including 10 kA.
58
SANS 1777
Photoelectric control units for lighting (PECUs).
59
SANS 1799
Watt-hour meters � AC electronic meters for active energy.
60
SANS 1973-1
Low-voltage switchgear and controlgear ASSEMBLIES � Part 1: Type-tested ASSEMBLIES with stated deviations and a rated shortcircuit withstand strength above 10 kA.
61
SANS 1973-3
Low-voltage switchgear and controlgear ASSEMBLIES � Part 3: Safety of ASSEMBLIES with a rated prospective short-circuit current of up to and including 10 kA.
62
SANS 1973-8
Low-voltage switchgear and controlgear ASSEMBLIES � Part 8: Safety of minimally tested ASSEMBLIES (MTA) with a rated short-circuit current above 10 kA and a rated busbar current of up to and including 1 600 A a.c. and d.c.
63
SANS 337
Stove couplers.
64
SANS 529
Heat-resisting wiring cables.
65
SANS 556-1
Low-voltage switchgear � Part 1: Circuit-breakers.
66
SANS 60269-1/IEC 60269-1
Low-voltage fuses � Part 1: General requirements.
67
SANS 60309-1/IEC 60309-1
Plugs, socket-outlets and couplers for industrial purposes � Part 1: General requirements.
68
SANS 60309-2/IEC 60309-2
Plugs, socket-outlets and couplers for industrial purposes � Part2: Dimensional interchangeability requirements for pin and contact-tube accessories.
69
SANS 60439-1/IEC 60439-1
Low-voltage switchgear and controlgear assemblies � Part 1: Type-tested and partially type-tested assemblies.
70
SANS 60439-2/IEC 60439-2
Low-voltage switchgear and controlgear assemblies � Part 2: Particular requirements for busbar trunking systems (busways).
71
SANS 60439-4/IEC 60439-4
Low-voltage switchgear and controlgear assemblies � Part 4: Particular requirements for assemblies for construction sites (ACS).
72
SANS 60439-5/IEC 60439-5
Low-voltage switchgear and controlgear assemblies � Part 5: Particular requirements for assemblies for power distribution in public networks.
73
SANS 60529/IEC 60529
Degrees of protection provided by enclosures (IP Code).
74
SANS 60570/IEC 60570
Electrical supply track systems for luminaires.
75
SANS 60598-2-18/IEC 60598-2-18
Luminaires � Part 2: Particular requirements � Section 18: Luminaires for swimming pools and similar applications.
76
SANS 60598-2-23/IEC 60598-2-23
Luminaires � Part 2-23: Particular requirements � Extra low voltage lighting systems for filament lamps.
77
SANS 60601-1/IEC 60601-1
Medical electrical equipment � Part 1: General requirements for basic safety and essential performance.
78
SANS 60669-1/IEC 60669-1
Switches for household and similar fixed electrical installations � Part 1: General requirements.
79
SANS 60669-2-1/IEC 60669-2-1
Switches for household and similar fixed electrical installations � Part 2-1: Particular requirements � Electronic switches.
80
SANS 60730-2-7/IEC 60730-2-7
Automatic electrical controls for household and similar use � Part 2-7: Particular requirements for timers and time switches.
81
SANS 60906-3/IEC 60906-3
IEC system of plugs and socket-outlets for household and similar purposes � Part 3: SELV plugs and socket-outlets, 16 A 6 V, 12 V, 24 V, 48 V, a.c. and d.c.
82
SANS 60947-2/IEC 60947-2
Low-voltage switchgear and controlgear � Part 2: Circuitbreakers.
83
SANS 60947-3/IEC 60947-3
Low-voltage switchgear and controlgear � Part 3: Switches, disconnectors, switch-disconnectors and fuse combination units.
84
SANS 60947-4-1/IEC 60947-4-1
Low-voltage switchgear and controlgear � Part 4-1: Contactors and motor-starters � Electromechanical contactors and motor-starters.
85
SANS 60947-4-2/IEC 60947-4-2
Low-voltage switchgear and controlgear � Part 4-2: Contactors and motor-starters � AC semiconductor motor controllers and starters.
86
SANS 60947-4-3/IEC 60947-4-3
Low-voltage switchgear and controlgear � Part 4-3: Contactors and motor-starters � AC semiconductor controllers and contactors for non-motor loads.
87
SANS 60947-5-1/IEC 60947-5-1
Low-voltage switchgear and controlgear � Part 5-1: Control circuit devices and switching elements � Electromechanical control circuit devices.
88
SANS 60947-5-2/IEC 60947-5-2
Low-voltage switchgear and controlgear � Part 5-2: Control circuit devices and switching elements � Proximity switches.
89
SANS 60947-5-5/IEC 60947-5-5
Low-voltage switchgear and controlgear � Part 5-5: Control circuit devices and switching elements � Electrical emergency stop device with mechanical latching function.
90
SANS 60947-6-1/IEC 60947-6-1
Low-voltage switchgear and controlgear � Part 6-1: Multiple function equipment �Transfer switching equipment.
91
SANS 60950/IEC 60950
Safety of information technology equipment. (Superseded by SANS 60950-1).
92
SANS 60950-1/IEC 60950-1
Information technology equipment � Safety � Part 1: General requirements.
93
SANS 60998-2-1/IEC 60998-2-1
Connecting devices for low-voltage circuits for household and similar purposes � Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units.
94
SANS 60998-2-2/IEC 60998-2-2
Connecting devices for low-voltage circuits for household and similar purposes � Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units.
95
SANS 61000-4-5/IEC 61000-4-5
Electromagnetic compatibility (EMC) � Part 4-5: Testing and measurement techniques � Surge immunity test.
96
SANS 61000-4-7/IEC 61000-4-7
Electromagnetic compatibility (EMC) � Part 4-7: Testing and measurement techniques � General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto.
97
SANS 61008-1/IEC 61008-1
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) � Part 1: General rules.
98
SANS 61036/IEC 61036
Alternating current static watt-hour meters for active energy (classes 1 and 2). (Superseded by SANS 62053-21.)
99
SANS 61084-1/IEC 61084-1
Cable trunking and ducting systems for electrical installations � Part 1: General requirements.
100
SANS 61238-1/IEC 61238-1
Compression and mechanical connectors for power cables for rated voltages up to 30 kV (Um = 36 kV) � Part 1: Test methods and requirements.
101
SANS 61312-3/IEC/TS 61312-3
Protection against lightning electromagnetic impulse � Part 3: Requirements of surge protective devices (SPDs).
102
SANS 61347-2-2/IEC 61347-2-2
Lamp controlgear � Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps.
103
SANS 61386-1/IEC 61386-1
Conduit systems for cable management � Part 1: General requirements.
104
SANS 61386-21/IEC 61386-21
Conduit systems for cable management � Part 21: Particular requirements � Rigid conduit systems.
105
SANS 61386-22/IEC 61386-22
Conduit systems for cable management � Part 22: Particular requirements � Pliable conduit systems.
106
SANS 61386-23/IEC 61386-23
Conduit systems for cable management � Part 23: Particular requirements � Flexible conduit systems.
107
SANS 61558-1/IEC 61558-1
Safety of power transformers, power supplies, reactors and similar products � Part 1: General requirements and tests.
108
SANS 61558-2-15/IEC 61558-2-15
Safety of power transformers, power supply units and similar � Part 2-15: Particular requirements for isolating transformers for the supply of medical locations.
109
SANS 61558-2-2/IEC 61558-2-2
Safety of power transformers, power supplies, reactors and similar products � Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers.
110
SANS 61558-2-5/IEC 61558-2-5
Safety of transformers, reactors, power supply units and combinations thereof � Part 2-5: Particular requirements and test for transformers for shaver power supply units for shavers and shaver supply units.
111
SANS 61558-2-6/IEC 61558-2-6
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V � Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers.
112
SANS 61643-1/IEC 61643-1
Low-voltage surge protective devices � Part 1: Surge protective devices connected to low-voltage power distribution systems � Requirements and tests.
113
SANS 61643-12/IEC 61643-12
Low-voltage surge protective devices � Part 12: Surge protective devices connected to low-voltage power distribution systems � Selection and application principles.
114
SANS 62040-1/IEC 62040-1
Uninterruptible power systems (UPS) � Part 1: General and safety requirements for UPS.
115
SANS 62053-11/IEC 62053-11
Electricity metering equipment (a.c.) � Particular requirements � Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2).
116
SANS 62053-21/IEC 62053-21
Electricity metering equipment (a.c.) � Particular requirements � Part 21: Static meters for active energy (classes 1 and 2).
117
SANS 62103/IEC 62103
Electronic equipment for use in power installations.
118
SANS 62305-1/IEC 62305-1
Protection against lightning � Part 1: General principles.
119
SANS 62305-2/IEC 62305-2
Protection against lightning � Part 2: Risk management.
120
SANS 62305-3/IEC 62305-3
Protection against lightning � Part 3: Physical damage to structures and life hazard.
121
SANS 62305-4/IEC 62305-4
Protection against lightning � Part 4: Electrical and electronic systems within structures. International and foreign standards
122
SANS 767-1
Earth leakage protection units � Part 1: Fixed earth leakage protection circuitbreakers.
123
SANS 780
Distribution transformers.
124
SANS 950
Unplasticized polyvinyl chloride rigid conduit and fittings for use in electrical installations.
125
UL 508

NQF4 - Electrician (6 decks)

Brainscape helps you reach your goals faster, through stronger study habits.
© 2025 Bold Learning Solutions. Terms and Conditions