Run Test

Question 1

How long must you cool the JFS and ADG after 4 minutes of motoring time has accumulated?

Answer 1

80 minutes

Question 2

The JFS run light should come on by how many seconds after initiation?

Answer 2

30 seconds

Question 3

What is the maximum RPM at intermediate?

Answer 3

97%

Question 4

which of the following happens at 55%?

Answer 4

Aircraft standby generator light goes out

Question 5

what is the minimum oil pressure at idle?

Answer 5

15psi

Question 6

Nozzle position at intermediate should be?

Answer 6

less than 20%

Question 7

How much hydraulic pressure should you have at intermediate power?

Answer 7

2850-3250psi

Question 8

Maximum stabilized idle FTIT is?

Answer 8

625 degrees celsius

Question 9

during engine start the JFS will automaticall yshut down at what RPM?

Answer 9

50%

Question 10

After motoring with JFS for greater than 1 minute but not more than 4 minutes, how many minutes of cooling time must you wait before attempting a normal JFS start?

Answer 10

5 Minutes

Question 11

You should have oil pressure indication within how long after an indication of a light-off?

Answer 11

1 Minute

Question 12

T or F? The minimum charge on the JFS accumulators before attempting a start is determined by ambient temperature

Answer 12

True

Question 13

Maximum FTIT During start is?

Answer 13

800 C

Question 14

The SEC light will go out automatically at approximately what RPM?

Answer 14

18%

Question 15

What is the maximum FTIT in Intermediate?

Answer 15

1070 C

Question 16

Engine Light-off should occur within how many seconds after throttle is advanced to idle?

Answer 16

30 seconds

Question 17

At what RPM should you advance the throttle to idle on a normal engine start?

Answer 17

> 20%

Question 18

What is the idle fuel flow limitation

Answer 18

500-2000 PPH

Question 19

If the HYD/OIL light warning light is illuminated at stabilized idle, what should you do?

Answer 19

Increase RPM 2-3% and return to idle extinguish the light

Question 20

What should Nozzle position be at idle?

Answer 20

> 80%

Question 21

What is the maximum oil pressure at intermediate?

Answer 21

95psi

Question 21

The ENG light should go out at approximately what RPM?

Answer 21

55%

Question 21

The HYD/OIL light should not go out until above what RPM?

Answer 21

25%

Question 22

The Main Generator Light should go out how long after the Stand-by generator light?

Answer 22

5-10 seconds

Question 22

Motoring the JFS in a 1-Hour period is limited to how many 1 minute or less consecutive motoring's?

Answer 22

10

Question 23

During an engine run with avionics equipment turned off, the air source switch may be turned off for no more than how many minutes at a time?

Answer 23

30

Question 24

Which of the following must be performed prior to any engine operation of designated aircraft?

Answer 24

A. Review of AFTO 781's B. Tool Inventory C. Safety Briefing D. Foreign object check of area around aircraft E. All of the above

Question 25

What T.O will you find engine panels required for an engine run?

Answer 25

1F-16CJ-2-70JG-00-21

Question 26

What should you do if the JFS switch does not automatically shut off?

Answer 26

Turn it off manually

Question 27

If the engine has been operated above 800 degrees FTIT, how long must you cool the engine before shutdown?

Answer 27

5 Minutes

Question 28

T or F? A Hung Start has occurred if RPM has stopped increasing below idle and FTIT has stabilized at less than 800 degrees Celsius

Answer 28

True

Question 29

What position should the A/B reset switch be in for start?

Answer 29

Norm

Question 30

Mal and Indicator lights switch shall not be depressed for not more than how many seconds?

Answer 30

30

Question 31

Can you operate the Engine/Aircraft with the digital flight control computer removed?

Answer 31

NO

Question 32

After Obtaining Clearance from MOCC, you must have radio contact with?

Answer 32

Tower