SECTION 2 Flashcards
(31 cards)
These services deal with data
collection, analysis, and
recommendations.
CONSULTATIONS, RESEARCH,
INVESTIGATIONS, AND REPORTS
These services usually precede the
authorization of a capital project and
may involve extensive
investigations, analyses of
conditions, and comparison of
several possible plans.
2.2.1 Preliminary and Feasibility
Investigations and Reports
These services may include the
broad areas of developing the
engineering requirements of master
plans for long-range capital
improvement programs
2.2.2 PLANNING STUDIES
These services may include
investigations and analyses of
existing conditions; capital and
operating costs; overhead costs and
costs of financing; and revenues as
needed to evaluate a property or to
recommend establishment of
prospective rates.
2.2.3 Appraisals, Valuations, and Rate Studies
The Civil Engineer may be engaged
by a client who is planning to issue
bonds, particularly revenue bonds,
to finance a capital project.
2.2.4 Assisting in Financial Matters
These services include tests of
materials and equipment under
established codes and standards,
specialized examination of
equipment and materials used in
construction and industry, and other
inspections and monitoring required
by a client.
2.2.5 Materials Engineering and Equipment
Tests
This includes services such as
assistance in preparation for legal
proceedings.
2.2.6 Direct Personal Services
Research is a specialized
investigation and gathering of data
from existing resources or through
laboratory works and processes
related to the purpose and object of
the research.
2.2.7 Research and Development
These services can vary to suit special
needs of the client
2.2.8 Special Services
analysis of the client’s needs,
obtaining and studying
conceptual opinions of
probable construction cost.
Study and Report Phase
Assistance to the
client with bidding or
negotiating procedures for
construction of the project.
Bidding and Negotiating
Phase
Advice and Consultation on
matters related to this phase.
Construction Phase
Assistance to the client in
start-up and operation of the
project, including periodic
inspections.
Operation Phase
What are the six typical
phases of a construction project
Study and Report Phase
Preliminary Design Phase
Final Design Phase
Bidding and Negotiating Phase
Construction Phase
Operation Phase
involves determination of project
scope and limitations
Study and Report Phase
Involves the establishment of the
general size and scope of the project
and its location on the selected site
Preliminary Design Phase
The preparation of construction
drawings and specifications showing
the character and extent of the
project.
Final Design Phase
Services under this phase may
include:
Assisting the client in
advertising for and obtaining
bids
Attending pre-bid
conferences to interpret,
clarify, expand or amend
bidding documents.
Preparing addenda as
appropriate to interpret,
clarify, expand or amend
bidding documents.
Bidding and Negotiating Phase
Services under this phase involve
consulting with and advising the
client during construction and are
usually those services which do not
involve the responsibilities
associated with full-time resident
construction phase services without
providing resident project
representative services at the site.
Construction Phase
At the request of the client, the Civil
Engineer may as a basic service,
assist in the start-up of project
operations. The basic services may
assist in the start-up of project
operations.
Operation Phase
A registered Civil Engineer can be
a contractor if approved by ______________
CIAP (Construction Industry Authority
of the Philippines)
CE may provide services such as:
Construction Manager, Quality Control Engineer, Quality Assurance Inspector, Materials Engineer, Project Engineer, Render project inspection services
Services normally provided during
the study, design, construction,
operation and management phases
of a project are categorized as ____________
normal services
Support services needed in most
projects:
Geotechnical
Environmental
Structural system evaluation
Testing and inspection
Surveying
