Security Equipment

Question 1

RSO

Answer 1

Regional Security Officer

Question 2

DRSO

Answer 2

Deputy Regional Security Officer

Question 3

RSOI

Answer 3

Regional Security Officer Investigator

Question 4

ARSO

Answer 4

Assistant Regional Security Officer

Question 5

LGF

Answer 5

Local Guard Force

Question 6

STOC

Answer 6

Security Technical Operations Center

Question 7

System Controller (WV-CU650)

Answer 7

select available monitor and display cameras on it, control available cameras, controls 1-256 cameras, connects to up to 16 DVR’s, Connects to up to 34 monitors

Question 8

What are the TWO types of cameras?

Answer 8

Fixed and Pan Tilt Zoom(PTZ)

Question 9

On the CU650, how many levels of priority are there?

Answer 9

5 levels with “1” being the highest level

Question 10

What are the TWO ways to switch between cameras using the CU650

Answer 10

The “+” and “-“ buttons ascend and descend between cameras. Clicking a number of camera desired and then clicking “CAM” button on the keypad.

Question 11

How do you log on and off of the CU650

Answer 11

Logging on: Enter user ID, press the “CAM” button, enter the 5-digit password, press the “CAM” button.
Logging Off: Press the “SHIFT” button, press the “LOCK OUT” button.

Question 12

How do you change the monitor in use using the CU650?

Answer 12

Click the number of desired monitor, press the “MON” button.

Question 13

What is the purpose of the Intellex DVR?

Answer 13

Capture and preserve video/evidence of events around the facilities
MSG video playback via SPARTA

Question 14

What are the capabilities of the Intellex DVR?

Answer 14

24/7 recording of all cameras (if on DVRs), 8 terabyte hard drive per DVR, displays up to 16 cameras, Linked to SPARTA via SMSe network, Minimum of 14 days of recording(delta compression minimizes date storage), located in SIC room.

Question 15

What is Delta Compression?

Answer 15

only records parts of the image that change

Question 16

D&C

Answer 16

“Duck and Cover”. Is tone one. Connected to Preset 1

Question 17

Evac

Answer 17

“Evacuation”. Is tone 2. Connected to Preset 3

Question 18

Safe Area(aka Safe Haven)

Answer 18

Is Tone 3. Connected to Preset 4

Question 19

Review PE sheets on MOODLE for any test requirements not on here.

Answer 19

Review PE sheets on MOODLE for any test requirements not on here.

Question 20

Tear Gas (TG) Guard System

Answer 20

The firing system is in Post One. Multipurpose Grenade in dispenser

Question 21

Using the TG Guard System

Answer 21

Check Power LEDs, Select zone and turn knob to desired area, Arm system- insert key and press inward gently turning key right 90 degrees causing red LED to flash, Lift cover and press toggle switch up. DO NOT TURN OFF THE SYSTEM UNTIL TOLD OTHERWISE BY DET. COMMANDER OR RSO.

Question 22

What are the types of sensors

Answer 22

Photoelectric system, Ultrasonic motion detectors, Contact sensors, PIR and Energy detectors.

Question 23

Difference between zones and partitions

Answer 23

Zones are individual sensors.
Partitions are connections of multiple zones.

Question 24

AES 6500

Answer 24

24 individual “Access/Secure” buttons. “A” “B” “C” buttons. “Test”, “Silence” and “Reset” buttons. Power LEDs

Question 25

AES 6500 buttons

Answer 25

No LED= Secure mode Amber LED= Access mode Red LED= Alarm mode Pressing "A", "C", and "silence at the same time will secure all zones "purify the system". Test Button= triggers all zones into alarm mode( not ones in access) Silence button= silences audible alarms and steadies red flashing LEDs Reset Button= turns off red LEDs, only used when testing the system and/or after a zone is put in secure mode.

Question 26

CINCH I24

Answer 26

Designed to condense a very large number of individual office sensors. Includes two touch screens, each shows up to 16 icons. Left=partitions Right=zones.

Question 27

Security Management System Enterprise (SMSe)

Answer 27

secure (non-classified) computer network. Centralized platform allowing for integration of various security and access control programs and systems. Managed by STOC

Question 28

CU-50

Answer 28

Used to monitor especially sensitive areas, can be set up as a discrete alarm system. Keypad can be silent

Question 29

AS-50

Answer 29

Alarm Panel for the CU-50. Located in post one. power failure panel. up to 8 modules

Question 30

KDU-50 keypad

Answer 30

used to investigate alarms, conduct security inspections, regularly scheduled equipment checks, Put sensors in Shunt mode. (press buttons lightly because of sensitivity)

Question 31

HSAS

Answer 31

used to monitor especially sensitive areas. Can be set up as a discrete alarm system (HSAS keypad can be silent). Can replace the CU-50. Looks similar to the AES6500

Question 32

CINCH IDS

Answer 32

Exact same as CINCH I24 except you don't use the screen on the right ever in post one. will require access codes to use.

Question 33

SelecTone System

Answer 33

Public announcement system connects all over embassy.