Show Me Questions Flashcards
(19 cards)
Show me how you would check that all doors including cargo doors are secure
All doors must be closed and locking levers for cargo doors are set in the recommended secured position.
Show me how you would check for air leaks on this vehicle
Charge the air tanks,
Consult gauges for drops in pressure
Walk round vehicle listening for obvious leaks
Show me how you would check the condition of the mudguards on this vehicle
As part of the daily walk round check ensure mudguards and spray suppression equipment are secure, not cracked or loose
Show me how you would check for the correct air pressure on this vehicle
Ensure gauges are reading the correct pressures for the vehicle and that all warning lights are extinguished and audible warning devices are not sounding
Identify where you would check the engine oil level and tell me how you would check that the engine has sufficient oil.
Identify dipstick,
Wipe it clean
Check level against the minimum/maximum markers
Show me how you would check the wheel nuts are secure on this vehicle
A visual check to identify any nuts that are obviously loose and check that the wheel nut indicators (if fitted) are in alignment
Show me how you would check the operation (specify horn, warning device for reversing) of the audible warning devices on this vehicle
Demonstrate use of control
Show me how you would check that the brake lights are working on this vehicle (i can assist you, if you need to switch the ignition on, please don’t start the engine)
Operate brake pedal,
Make use of reflections in windows, garage doors
Or ask someone to help
Identify where you would check the engine coolant level and tell me how you would check that the engine has the correct level
“This is the engine coolant reservoir. I’d check that the level is between the minimum and maximum markings on the side of the tank. If it’s low, I’d top it up with the correct coolant — but only when the engine is cold.
Show me how you would replace the tachograph disc on this vehicle
Candidate to demonstrate how to insert tachograph disc.
Digital tachographs may require an explanation if the candidate doesn’t have a digital card.
Show me/ explain how you would check that the power assisted steering is working
If the steering feels heavy, the power assist may not be working. To check, apply gentle pressure on the wheel as you start the engine — it should move slightly. Or, turn the wheel just after moving off — it should feel light and smooth.
Show me how you would check that the direction indicators are working
Applying the indicators or hazard warning switch and checking functioning of all indicators
Identify where the windscreen washer reservoir is and tell me how you would check the windscreen washer level
The windscreen washer reservoir is usually under the bonnet, marked with a windscreen/water symbol. To check the level, make sure there’s fluid visible or open the cap and look inside to ensure it hasn’t run dry.”
Show me what instrument checks you would make before and after starting the engine on this vehicle
Check to make sure all gauges and warning systems are working.
Ensure that all gauges are reading correctly and that warning lights/ audible warning devices are extinguished before moving away
Show me where the first aid equipment is kept on this vehicle
Candidate to indicate equipment if carried.
Where equipment is not present, candidates should be able to explain under what circumstances (vehicle types, loads carried) it must be provided on
Show me how you would clean the windscreen using the windscreen washer and wipers
Operate control to wash and wipe windscreen (turn ignition on if necessary)
Show me how you would set the windscreen demister to clear the windows effectively
Set all relevant controls including:
Fan,
Temperature
Air direction
Engine does not have to be started for this demonstration
Show me how you would switch on the rear fog lights and explain when you would them (no need to exit the vehicle)
Operate switch (turn on ignition and dipped headlights if necessary)
Check warning light is on, use when visibility is reduced below 100 meters
Show me how you would switch your headlight from dipped to main beam
Operate switch (with ignition or engine on if necessary) check the main beam warning light is
