Slides Flashcards
(28 cards)
What is the max vert height of a free stand slide if the access is not offset or changed direction?
2 500 mm.
Where the starting section of a slide is easily accessible the free height of fall (h) shall be
2 000 mm maximum unless guarding is provided.
if a slides fall height is more than 1m what is needed in the opening
crossbar. The crossbar shall be positioned between the platform guard rail or barrier and the start of the sliding section.
What is The height of the crossbar
between 600 mm and 900 mm above the starting section.
Starting section length
at least 350 mm length.
Slope of starting section
0° to 5°
What are the three scenarios where a guarding section is required around the start section
the length of the starting section is more than 400 mm;
⎯ the starting section is easily accessible and has a free height of fall of more than 1 000 mm;
⎯ the free height of fall of the starting section is more than 2 000 mm.
How high does the guarding section need to be on attachment slides where the start section is beyond the platform?
at least 500 mm
For free-standing slides, the guarding section shall have a height of at least ….
that required for platforms at one point 700mm
What is the steepest angle a slide may br
60 deg
Width of a multi track slide max measurement
700 mm.
Is there a min slide width
No
Edges of slide sides should be rounded to ?? radius.
3 mm
How high do track dividers need to be
100mm
Fall height of slide has a lateral projection requirement. What is it for a slide that is less than 1.2m high?
100
Fall height of slide has a lateral protection requirement. What is it for a slide that is between 1.2-2.5m high?
150
Fall height of slide has a lateral projection requirement. What is it for a slide that over 2.5m high?
500
Fall height of slide has a lateral projection requirement. What is it for a slide that is easilty accessible, greater than 2m high?
500
If the length of the sliding section is less than 1.5m what is the length of them run out and height of runout.
300 + run out length and 200 max run out height.
If the length of the sliding section is between 1.5m and 7.5 what is the length of them run out and height of runout.
500 type 1 (10 deg run out) or .3 x length of sliding section. Both max 350high.
If the length of the sliding section is more than 7.5m what is the length of them run out and height of runout.
For tupe 1 (10 deg run. out) 1.5m length run out, and 350mm high max.
For type 2 (5 deg run out)
> 0,3 x length of sliding section, B
350 height.
What degree inclination makes for a type 2 slide runout?
5 deg max.
what do you have to look out for in tunnel slides with joins? Or anyother slide with joins
Gaps that can capture clothing, or have razor blades, or objects poked into them.
In the case of slides, when can free space overlap?
On dual use slides (i.e. side by side tracks).
