sog Flashcards

(28 cards)

1
Q

Who is responsible for ensuring an injured employee receives medical attention, if applicable?

A

B) The Supervisor

Per SOG 110, “Supervisor shall assure the Injured Employee receives the medical attention if applicable.”

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

Which apparatus is responsible for assuming the role of Fire Attack 1 in an offensive mode mid-rise fire incident?

A

C) The first arriving Engine

Per SOG #05, “The first arriving Engine will assume Fire Attack 1 and determine the best method for fire attack.”

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

What should the first arriving Company Officer state as part of their initial size-up at a high-rise fire incident?

A

B) That high-rise procedures will be in effect

Per SOG #06, “The first arriving Company Officer shall state, as part of their initial size-up that high-rise procedures will be in effect.”

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

Under what condition is it acceptable for staff members to not wear a safety vest during an outside emergency incident?

A

B) When they are exposed to fire, heat, flame, or hazardous materials

Per SOG 209G, an exception to wearing a safety vest is “when staff members are exposed to fire, heat, flame, or hazardous materials where NFPA-compliant turnout gear is more appropriate.”

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

What is the standard engine pressure used to charge an FDC connection for an automatic sprinkler system unless otherwise indicated?

A

C) 150 psi

Per SOG 210G, “Charge the connection with engine pressure of 150 psi. Some FDC’s may have a sign that indicates higher pressure is required.”

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

What is the purpose of angling the apparatus to ‘Block to the Left’ or ‘Block to the Right’ on a roadway incident?

A

B) To lead traffic away from the work zone and protect personnel

Per SOG 213G, “Angle the apparatus on the roadway to ‘Block to the Left’ or ‘Block to the Right’ in order to lead the traffic in the direction away from the work zone.”

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

What is the primary mission of the Engine Company on the fire ground?

A

C) Search and Rescue

Per SOG 221G, “Search and Rescue - Primary mission of the Engine Company.”

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

In what mode should the aerial ladder be set when using it for rescues?

A

B) Rescue mode

Per SOG 222G, “It may be necessary to use the aerial to perform rescues… Ensure that the elevated master stream is in ‘rescue mode’ when using the aerial for rescues.”

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

What should a firefighter do immediately after declaring ‘MAYDAY, MAYDAY, MAYDAY’ on the tactical channel?

A

B) Provide a CAN report

Per Regional Procedure #03, “While continuing to keep the microphone keyed up, the firefighter(s) and/or crew(s) declaring a mayday will provide a CAN report that includes: Who is having the mayday, what caused the mayday, last known or known location, Give detailed information in your needs to resolve the mayday.”

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

What is the minimum number of members required for a Rapid Intervention Crew (RIC)?

A

B) Two

Per Regional Procedure #04, “Rapid Intervention Crew (RIC): A rapid intervention crew shall consist of at least two members and shall be available for rescue of a lost or trapped firefighter.”

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

What is the primary goal when handling wildland fires according to the strategies and tactics section?

A

B) Life safety and structural protection

Per SOG 406G, “The basic brush fire philosophy is to aggressively stop the forward progress of fire whenever possible. Life safety and structural protection is always the primary goal.”

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

How often must structural firefighting protective clothing be retired based on age from the time of manufacture?

A

B) Every 10 years

Per SOG 309G, “All structural protective clothing will be retired when it reaches 10-years of age or greater from the time of manufacture.”

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

What should personnel do with heavily soiled PPE and SCBA after wet mitigation at an incident scene?

A

B) Bag it in department-approved bags at least 6 mils thick

Per SOG 318G, “It is recommended that heavily soiled PPE and SCBA after wet mitigation be bagged at the scene using department approved bags that are at least 6 mils thick.”

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

By what time must on-duty personnel complete the exchange of radios, equipment, and information during shift change?

A

B) 0700

Per SOG 605P, “Exchange of radios, equipment, and information will be completed by 0700.”

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

Where should the Crew Resource Board (CRB) be placed by the first arriving unit at an incident?

A

B) On the front bumper of the apparatus

Per Regional Procedure #05, “When a unit is first to arrive on a scene, a secondary board, named the ‘Crew Resource Board’ CRB… will be placed on the front bumper of the apparatus.”

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

Within how many days must WCESD No. 4 report a known conviction (other than a minor traffic offense) to the Texas Commission of Fire Protection?

A

C) 14 days

Per SOG 612P, “WCESD No. 4 shall report to the Texas Commission of Fire Protection commission, any known conviction… within fourteen days of the conviction…”

17
Q

What is the minimum cylinder pressure required during the daily SCBA inspection?

A

B) 4300 psi

Per SOG 901P, “Verify cylinder pressure is above 4300. If below, obtain a full bottle, and refill current bottle to 4500 psi.”

18
Q

What must be done with equipment deemed unsafe or inoperable after being damaged?

A

B) Tag it with a red out-of-service tag

Per SOG 903G, “Any damaged equipment that is deemed unsafe or inoperable must be taken out of service and tagged with a red out of service tag.”

19
Q

What is the test pressure for 1.75” fire hose?

A

C) 300 PSI

Per SOG 904G, 1.75” fire hose must be tested at 300 PSI for 5 minutes annually, as specified in the testing guidelines.

20
Q

What is the rated working load for the 14’ roof ladder?

A

C) 750 lbs

SOG 905G states that the 14’ roof ladder has a rated working load of 750 lbs with a 4-to-1 safety margin (3,000 lbs), meeting NFPA 1931 standards.

21
Q

Who is responsible for ensuring all personnel are wearing seat belts before the apparatus moves?

A

C) Both A and B

SOG 906G specifies that the Driver Operator ensures seat belts are worn before movement, while the Company Officer is accountable for personnel safety and any violations.

22
Q

What should be done if a safety-related problem is found during an apparatus inspection?

A

B) Notify the Station Officer and follow repair or out-of-service procedures

SOG 907G requires that safety-related issues be reported to the Station Officer, with procedures followed for repair or placing the apparatus out of service if needed.

23
Q

Which fuel type is used for the chainsaws?

A

C) 50:1 (2-cycle)

SOG 909 lists chainsaws among small engines requiring 50:1 (2-cycle) fuel, which is gasoline mixed with oil for 2-stroke engines.

24
Q

What is the first step before transmitting on the radio?

A

B) Listen to ensure the channel is clear

SOG 1001G instructs personnel to listen before transmitting to confirm the channel is clear, followed by organizing thoughts for an effective message.

25
When can the driver of an apparatus use the MDC?
B) Only when stopped and in park ## Footnote SOG 1002G states that drivers may only use the MDC when the apparatus is stopped and in park, except for command vehicles, prioritizing safe operation.
26
What is the maximum speed allowed during a Code 3 emergency response?
B) 20 MPH over the posted speed limit ## Footnote SOG 906G limits Code 3 response speed to 10 MPH over the posted limit, ensuring safety while using warning devices.
27
How many heat sensor labels are required on a ladder?
C) 4 ## Footnote SOG 905G specifies four heat sensor labels per ladder: two below the 2nd rung from the top and two below the middle rung on both sides.
28
Which apparatus requires both diesel fuel and DEF?
D) LHE1 ## Footnote SOG 909 lists LHE1 as requiring both diesel fuel and DEF (Diesel Exhaust Fluid) for its operation.