Squaring Board/Safety Notes

Question 1

What are the steps of squaring a board?
step 1

Answer 1

plane 1 face
- draw it out
- place board with cup facing up

Question 2

What are the steps of squaring a board?
step 2

Answer 2

plane opposite face
- flip board as you plane it down it to thickness
- flipping your board between each pass will ensure the faces are parallel

Question 3

What are the steps of squaring a board?
step 3

Answer 3

joint an edge
- make sure two points of contact on the table
- make sure the planed face is tight against the face
- creates 1 edge that is square to face

Question 4

What are the steps of squaring a board?
step 4

Answer 4

rip down on the opposite edge of the table saw
- make sure the joint edge is tight against the fence
- make the opposite edge parallel to the first edge and square to the faces

Question 5

What are the steps of squaring a board?
step 5

Answer 5

cross cut one end of the board
- ensure 2 points of contact
on the fence
- make sure the one edge is tight against the fence
- creates 1 end that is square to the faces and edges

Question 6

What are the steps of squaring a board?
step 6

Answer 6

cross cut the opposite end of the board
- measure out your board to the appropriate length
- how to measure and mark out a board
- ensure 2 points of contact on the fence
- creates 2nd end that is square to he faces and edges and parallel to the first end

Question 7

List the Safety Rules for each of the following tools:
Planer 1

Answer 7

do not place your fingers under the board

Question 8

List the Safety Rules for each of the following tools:
planer 2

Answer 8

do not look into the machine

Question 9

List the Safety Rules for each of the following tools:
planer 3

Answer 9

board must be at least 12’’

Question 10

List the Safety Rules for each of the following tools:
planer 4

Answer 10

1/16 max depth of cut

Question 11

List the Safety Rules for each of the following tools:
Planer 5

Answer 11

minimum board thickness of 1/4’’

Question 12

List the Safety Rules for each of the following tools:
planer 6

Answer 12

do not stand directly behind the planer

Question 13

List the Safety Rules for each of the following tools:
planer 7

Answer 13

do not cut against the grain

Question 14

List the Safety Rules for each of the following tools:
jointer 1

Answer 14

4’’ margin of safety

Question 15

List the Safety Rules for each of the following tools:
jointer 2

Answer 15

feed the board from the infeed table to out feed table

Question 16

List the Safety Rules for each of the following tools:
jointer 3

Answer 16

board must be at least 12’’ long

Question 17

List the Safety Rules for each of the following tools:
jointer 4

Answer 17

board must be at least 1/4’’ think

Question 18

List the Safety Rules for each of the following tools:
jointer 5

Answer 18

board must be at least 2’’ wide

Question 19

List the Safety Rules for each of the following tools:
jointer 6

Answer 19

maximum cut depth of 1/16’’

Question 20

List the Safety Rules for each of the following tools:
jointer 7

Answer 20

never joint the end grain

Question 21

List the Safety Rules for each of the following tools:
table saw 1

Answer 21

stay out of the kickback zone

Question 22

List the Safety Rules for each of the following tools:
table saw 2

Answer 22

4’’ margin of safety

Question 23

List the Safety Rules for each of the following tools:
table saw 3

Answer 23

use the shark fin for cuts narrower than 4’’

Question 24

List the Safety Rules for each of the following tools:
table saw 4

Answer 24

use the guard for cuts wider than 4’’

Question 25

List the Safety Rules for each of the following tools: *table saw 5*

Answer 25

blade can't be more than 1/4'' above the material

Question 26

List the Safety Rules for each of the following tools: *table saw 6*

Answer 26

never use the fence and the miter gauge at the same time

Question 27

List the Safety Rules for each of the following tools: *miter saw 1*

Answer 27

4'' margin of safety

Question 28

List the Safety Rules for each of the following tools: *miter saw 2*

Answer 28

blade must be up to full speed before cutting