Study Review 2

Question 1

How is a volt meter connected to measure voltage across a resistor?

Answer 1

In parallel across the resister only

Question 2

In the shorthand notation used in electronics to shorten large numbers to more manageable form, the letter K is used to designate

Answer 2

1,000

Question 3

The symbol below indicates

Answer 3

Variable resistor

Question 4

The most correct way to write 15,000 micro volts would be;

Answer 4

15m volts

Question 5

A resistor with Green, Blue, and Red color bands has a value of;

Answer 5

5.6K ohms

Question 6

A meter reading 0 ohms across a fuse would indicate;

Answer 6

The fuse is good

Question 7

A resistor with Red, Yellow, Silver and Silver color bands has a value of

Answer 7

.24 Ohms +- 10%

Question 8

When using a multimeter, power must be off to measure;

Answer 8

Ohms

Question 9

Which type of resistor is used for high current applications?

Answer 9

Wire wound

Question 10

Which of the components below could be used as a fixed ‘dummy load’ in a DC circuit

Answer 10

Draw symbol

Question 11

What meter range should be used when initially measuring an unknown value?

Answer 11

Highest

Question 12

To measure current, the circuit must be

Answer 12

Opened and the meter placed in series with the circuit

Question 13

What is the voltage indicated on the analog meter shown

Answer 13

500 volts

Question 14

Resistors are rated in accordance to their Ohmic value and;

Answer 14

Wattage