Test 2

Question 1

With regards to safety, how do public spaces differ from residential spaces?

Answer 1

Standards of safety are higher

Question 2

If a fire breaks out in a public space, what poses the greatest danger?

Answer 2

The rapidly spreading smoke

Question 3

In public buildings, what design innovation helps contain the spread of fire from one section of a structure to the other

Answer 3

Fire Seperation

Question 4

If a wood frame wall is upgraded by the addition of extra layers of fireproof gypsum board, what safety characteristic of the wall construction has been modified?

Answer 4

Fire resistance rating

Question 5

What is the difference between a fire wall and a fire separation

Answer 5

Fire wall must be made from Masonry

Question 6

How can you tell if an automatic door closer is adequate as part of a fire rated assembly?

Answer 6

It must bear an approved label

Question 7

Can an unlabeled wood door and frame be used as part of a fire-rated assembly

Answer 7

No, it must have an approved label to be part of a fire separation

Question 8

In an approved door and frame fire rated assembly, what else besides the design and construction of the door is important for safety?

Answer 8

The correct clearance between the door and frame

Question 9

True or False: A door that is part of a fire separation can never be held in the open position.

Answer 9

False

Question 10

What is the common feature to operate shutters and dampers that are part of a fire separation assembly?

Answer 10

Fusible Link

Question 11

Surfaces, materials and finishes are selected for public buildings to enhance safety if there is a fire. What rating, established through standardized testing, is referred to when describing the rate at which a given material becomes combustible under active fire conditions?

Answer 11

Flame Spread Rating

Question 12

With respect to the speed with which a fire spreads on a given surface, which class is considered the most dangerous?

Answer 12

Class E

Question 13

What type of carving is depicted in the image below?

Answer 13

Chip Carving

Question 14

What type of carving is depicted in the illustration below?

Answer 14

Relief Cutting

Question 15

What two forms of carving are seen in this image?

Answer 15

Relief and applique

Question 16

If a product has been treated with a fire retardant chemical and is then exposed to fire which causes a surface coating to swell up, what type of fire retardant has been used?

Answer 16

Intumescent coating

Question 17

This seal carving in progress will be what type of carving when it is finished?

Answer 17

In the Round Carving

Question 18

What device facilitates honing of curved interior surfaces on carving tools?
-Slip stones
-Leather strop
-Felt buffing wheel
-All of the above

Answer 18

All the Above

Question 19

Why would the shank of a carving chisel be bent into a curve near the cutting edge?

Answer 19

For Cleaning the bottom of Receses

Question 20

What is the term used to describe the curvature of the cutting edge of a gouge?

Answer 20

Sweep

Question 21

What is the name of the carving accessory pictured here

Answer 21

Rifflers

Question 21

What type of carving employs the tools pictured here?

Answer 21

Chip Carving

Question 22

What 2 common embellishments are found on the knee of a cabriole leg?

Answer 22

Shell and Leaf

Question 23

Which characteristic listed below distinguishes formal public buildings from other types of architecture?

Answer 23

They are built to monumental scale

Question 23

Modern formal public buildings mimic the scale and appearance of which foregone era?

Answer 23

Ancient Greece and Rome

Question 24

You are working on a large new courthouse project. What is true in regards to access and security

Answer 24

Access to the site is tightly controlled 24 hours per day

Question 24

Courthouses are built with highly durable substrates for millwork and complex chases and other accommodations to allow cable access throughout the building. Why is this?

Answer 24

For Security

Question 25

Which groups of descriptors, listed below, apply to the psychological effect of formal public spaces? -Accessible, Casual, Attractive -Flexible, Inviting, Spacious -Plain, Austere, Functional -Permanence, Authority, Tradition

Answer 25

Permanence, Authority, Tradition

Question 26

What characteristics are common in the trim, mouldings and millwork details of formal public spaces?

Answer 26

Oversized components and curved items

Question 27

What describes materials used for food service work?

Answer 27

Heat and moisture resistant

Question 28

What types of laminates are recommended for use in the food service industry?

Answer 28

Smooth and Untextured

Question 28

What resource do designers use for help in deciding the sizes and general shape of built-in units for courthouses and other formal public spaces?

Answer 28

AWMAC Manual

Question 29

What special material is used in the vertical panels of judge’s benches and witness stands for added safety?

Answer 29

Bullet Proof Core

Question 30

What is the purpose for the acrylic portion of the food service item pictured here?

Answer 30

Sneeze Gaurd

Question 30

What is it about millwork components made for formal public spaces that make it challenging to fabricate, store, transport and install them as compared to residential millwork?

Answer 30

Size and Complexity

Question 31

From the list below, which wood species is most appropriate for a laminated work surface in a food service facility? -Brown Alder -Red Cedar -Red Oak -Rock Maple

Answer 31

Rock Maple

Question 32

You need to design a work surface that can withstand repeated high temperature washes and chemical disinfecting. Which materialis best?

Answer 32

Stainless Steel

Question 33

Can solid wood be bent dry?

Answer 33

Yes, if the curve is slight and the wood will allow it

Question 34

If you are unable to make a tightly curved element by bending, what technique simulates the look of solid curved elements?

Answer 34

Curved lamination

Question 35

True or False: The best wood for steam bending has been previously kiln-dried.

Answer 35

False

Question 36

If you are working on an installation on a jobsite for several weeks and other trades and services come and go at all hours, what security arrangement is needed to protect your profit margin

Answer 36

Locked Store Room

Question 37

When installing a kitchen, the client complains the refrigerator projects too far from the bearing wall behind it. You decide to open up the wall and modify the studs to create a recess. Is this an acceptable approach?

Answer 37

No the structure is compromised

Question 38

What can be done to ensure a solid installation of wall and base cabinets?

Answer 38

Locate and mark out stud locations

Question 39

What should be done to correct the alignment of this cabinet? The doors are mounted with pin hinges that are not adjustable.

Answer 39

Shim the top right and bottom left corners

Question 40

What step simplifies the installation of a run of lower cabinets?

Answer 40

A continuous level base under the units

Question 41

What is the purpose of the detail enlarged here

Answer 41

To allow for scribing to the wall

Question 42

Which method is easiest to ensure a tight fit of a laminate countertop against the walls when fitting between two end walls?

Answer 42

Make a template and fit counter prior to install

Question 43

What alternative method of making an acceptable custom installation is available where an end panel meets the wall and scribing is not possible?

Answer 43

Small Moulding

Question 44

If task lighting is installed under upper kitchen cabinets, what else is necessary

Answer 44

Valence Moulding

Question 45

If a millwork job is inspected after completion and flaws are discovered, what is the contractual term that is used to describe this phenomenon.

Answer 45

Deficiencies