Tool Specs

Question 1

Holmatro battery info

Answer 1

Lithium-Ion PBPA287
Fully charged battery is approx 40 cuts/spreads
3.3 lbs
Volts 28 VDC

Question 2

Onboard holmatro battery charger

Answer 2

“On tool charging” priority given to battery on tool first. When battery reaches 100%, automatically changes to charge battery on charger.
Average charge time 205 minutes

Question 3

Fluid used for holmatro tools

Answer 3

Nontoxic mineral oil

Question 4

Battery powered holmatro spreaders specs

Answer 4

PSP 40 (Pentheon Spreader)
Weighs 42.75 lbs
Spreads 28.5 inches
Max spread force 63,000 lbs
Max pull force 11,600 lbs
Max squeeze force 13,200 lbs

Question 5

Battery powered holmatro cutter specs

Answer 5

PCU 50 cutter (pentheon cutter)
Weighs 47.39 lbs
Max cutting opening 7 1/8 in
Cutting force 312,247 lbs

Question 6

Battery powered holmatro telescoping ram specs

Answer 6

PTR 50 telescoping ram
Weighs 43.87 lbs
Retraction length 22 3/4 in
Spread stroke 1st plunger 16 in
Spread stroke 2nd plunger 15 in
Max length extended 53 3/4 in
Spread force 1st plunger 30,572 lbs
Spread force 2nd plunger 14,612 lbs

Question 7

Skill saw specs

Answer 7

7 1/4” worm drive saw
4400 rpm
13 amps
120 volts

Question 8

CO2 extinguish specs

Answer 8

10BC (B=liquid, C=electrical)
3/8” hose
Pressurized to 865 psi

Question 9

Water can specs

Answer 9

2A rating
2.5 g H2O
3/8” hose
Pressurized to 100psi

Question 10

Dry Chem extinguisher specs

Answer 10

120BC (B=liquids, C=electrical)
1/2” hose
Pressurized to 195 psi

Question 11

Met-L-X extinguisher specs

Answer 11

Used for flammable metals
5/8” hose
Cartridge psi 800-900
Tank psi 300-400

Question 12

Tempest blower (big fan) specs

Answer 12

27”
9 fiberglass fins
24,000 cfm

Question 13

Tempest blower (small fan)

Answer 13

18” fan
8 blades
16,500 cfm

Question 14

Ram fan specs

Answer 14

16” diameter fan
21 fan blades
115 Volts
3200 CFM

Question 15

MPD specs

Answer 15

Pulley rated at 10,000lbs
Descent control rated at 5,100
Becket rated at 7,500

Question 16

What are 5 things an inspection cut tells you?

Answer 16

Size of members
Direction of members
Type of material used (2x4, metal, wood ect)
Depth of cut (decking)
Smoke and fire conditions

Question 17

What are the 3 modes of RIC

Answer 17

Standby
Support
Deployment

Question 18

What is the emergency evacuation signal?

Answer 18

10 seconds of short horn blasts followed by 10 seconds of silence for a total of 50 seconds.

Question 19

What channels does accountability officer monitor for RIC?

Answer 19

Red 9
Red 14
Red 16

Question 20

When E-trigger is pushed and a repeater is reached, where does communication go? When repeater is not reached?

Answer 20

Reached= red 16 xlc axs
Not reached= red 14 axs rev

Question 21

Bubble Cup TFT 1 1/2” nozzle gpm and psi

Answer 21

2 settings 20 GPM and 95 GPM
100 psi

Question 22

What is 2/3 pump capacity for KME’s and Segrave’s?

Answer 22

KME 1,166
Seagrave 1,000

Question 23

Address to TC

Answer 23

1845 N Ontario St

Question 24

Address to station 11

Answer 24

311 E Orange Grove Ave

Question 25

Address to station 12

Answer 25

644 N Hollywood Way

Question 26

Address to station 15

Answer 26

1420 W Verdugo

Question 27

Address to station 14

Answer 27

2305 W Burbank Blvd

Question 28

Address to station 16

Answer 28

1600 Bel Air

Question 29

Address to station 13

Answer 29

2713 Thornton Ave

Question 30

Who do you notify and how for vehicle equipment maintenance record

Answer 30

Fill out FG-2 and send to apparatus bc (Robertson), fire equipment specialist (Robert). CC your captain and intermediate clerk administration (Channing Reyes)

Question 31

What is the basic necessity for ric team

Answer 31

TRIBE Tic Ric bag Irons Box light Extrication sled

Question 32

What is the Max foam solution capability @150 psi for KME foam system

Answer 32

0.5% @ 600 gpm 1.0% @ 300 gpm 3.0% @ 100 gpm 6.0% @ 50 gpm