Training Bulletin 4 Flashcards

1
Q

How much fuel do California consumers use

A

43 million gallons of gas and 8 million gallons of diesel every day

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

Tank trucks transport appx how much fuel used by vehicles?

A

90% of all fuels used by vehicles over 9,500 retail service stations.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

Who periodically inspects tank trucks?

A

CHP

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

Official classification by the federal motor carrier standards for tank trucks

A

1967-1993= DOT 306 1993-present=DOT 406

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

Designed to carry liquid food products with vapor pressures

A

Less than 3 PSI

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Single tank truck two axle or three axle

A

3,000 and 5,000 gallons

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

Tank tractor with a semi-trailer connected together by a fifth wheel

A

One tank appx 40’ long with a capacity of 9,000 gallons.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

Tank truck pulling a two-axle trailer

A

Appx 20’ long. Truck tank 4,200 gallons and the trailer tank 4,800 gallons

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

Thickness of tank wall at bottom

A

3/16”

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

Tanks have to be what before being righted?

A

Off-loaded

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

Void space between bulkheads can hold how much product

A

200 gallons

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

How are valves opened?

A

By overcoming heavy spring pressure utilizing air, hydraulic or mechanical power.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

Pressure relief devices designed to maintain what PSI

A

3 to 5 PSI. BLEVE should not be a consideration

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

Gasoline tanker leak- isolation distance

A

Eliminate potential ign from a minimum of 100’.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

Ensure LEL is below

A

10%

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

Lafd foam tenders carry how much foam

A

1,000 gallons

17
Q

Aluminum tanks will melt at what temperature?

A

1,200 Degrees

18
Q

What rate doe s gasoline burn at?

A

One foot per hour, vertically.

19
Q

How much can the tank and trailer weigh?

A

80,000 pounds.

20
Q

Where do tanks tend to have the most damage?

A

The point where they come to rest

21
Q

What do you need to right a overturned truck?

A

Two 20 ton commercial towing wreckers

22
Q

Who is responsible for the product removal and cleanup?

A

The owner of the vehicle.

23
Q

Who handles all product offloading?

A

LAFD Hazardous Materials companies (stinger use)

24
Q

Who becomes the responsible party when MFC orders a private company?

25
Who needs to approve the request?
Deputy Department Commander
26
Required EPA Idenitification number for the Hamat waste manifest must be obtained from?
The on-call Chief of the Bureau of Fire Prevention and Public Safety.
27
Who has authority over Hazmat incidents on State roadways?
CHP
28
Who is responsible for the cleanup on State highways/freeways
Caltrans
29
What are the common sizes for vacuum trucks?
2,500 and 5,000 gallons
30
How much can vacuum trucks hold?
90% of theiry capacity.
31
What classification of truck should you order for the cleanup?
Clean
32
What info does the disposal company need?
Type of material, amount of material, number and capacity of trucks, extra vacuum and vapor recovery hose. 50' 4", 3" & 1 1/2