UT Test

Question 1

What are the first signature requirements? (6)

Answer 1

1. Task undertaken & completed iaw TI & supervisor
2. All replacement components & consumables to be physically checked
3. Loose article check
4. Localised unaided visual survey
5. Panels & access doors closed or refitted
6. Tool control procedures carried out

Question 2

What is an AESO?

Answer 2

A method for publicising low level engineering instructions.

Question 3

What does AESO stand for?

Answer 3

Aircraft Engineering Standing order

Question 4

What’s does the MAA stand for?

Answer 4

Military Aviation Authority

Question 5

What is the MAA?

Answer 5

Single regulatory authority responsible for regulating all aspects of air safety across defence.

Question 6

What are the three levels of documents within the MRP?

Answer 6

Overarching
Regulatory Articles
Manuals

Question 7

What is the 4000 series?

Answer 7

Continuing Airworthiness Engineering

Question 8

Why is coolant piped from the engine cooling system through the oil tank and oil supply pipe? (3)

Answer 8

To heat the oil in order to reduce its viscosity.

Ensuring it’s supplied efficiently to engine during cold operations.

Prolongs life of engine

Question 9

What does the engine oil pump do?

Answer 9

Pressurises oil for engine lubrication

Question 10

How many inlets and outlets does the oil pump have?

Answer 10

1 inlet

4 outlets

Question 11

How Is the inlet to the oil pump fed from the oil tank?

Answer 11

Gravity

Question 12

Percentages of the 4 outlets of oil pump?

Answer 12

Outlet 1 - 43% returns to the oil supply line.
Outlet 2 - 43% for drive side end plate engine, main bearing lubrication.
Outlet 3 - 7% not used and is returned to oil supply line.
Outlet 4 - 7% for rotor housing for lubrication.

Question 13

Hat does the poly v fan assembly consist of? (2)

Answer 13

Fan housing

Impeller

Question 14

What is the poly v fans function?

Answer 14

Suck cold air in to keep engine from exceeding design temperature

Question 15

What does the temperature sensor on the poly v fan assembly measure?

Answer 15

Air temperature which is exiting the engine.

Question 16

Purpose of air filter?

Answer 16

Stops shit reaching the combustion chamber

Question 17

What does IPS stand for?

Answer 17

Ice protection system

Question 18

What is the IPS made up of? (3)

Answer 18

8 wing electro-expulsive actuators in the wings
2 electro- expulsive actuators in the Vtails (1 each)
Ice detector

Question 19

What is the purpose of a idler? (2)

Answer 19

Provide tension & drive engine drive belt

Question 20

Why is an EMC kit used?

Answer 20

Reduce interference from ignition system

Question 21

What makes up ignition system? (3)

Answer 21

Spark plugs
Coils
Leads (copper braid)

Question 22

What does the starter alternator provide?

Answer 22

Electrical power to the RPAS

Question 23

What’s the four part cycle of the Wankel engine?

Answer 23

Induction
Compression
Power
Exhaust

Question 24

What does the RDA do?

Answer 24

Reduces the engine output RPM to the propeller

Question 25

What does the rubber sleeve I’m the RDA system provide

Answer 25

Vibration dampening Shock protection Protection for misalignment

Question 26

3 modes of starternator?

Answer 26

Starter mode Alternator Flywheel

Question 27

Starter mode of starternator?

Answer 27

Starts engine (ground only) from EPU in pate

Question 28

Alternator mode starternator?

Answer 28

Generates AC voltage and sent to rectifier

Question 29

What’s a flywheel?

Answer 29

Smooths out delivery of power from motor to machine

Question 30

What does DASOR stand for?

Answer 30

Defence Air Safety Occurrence Report

Question 31

How is a DASOR & DCOR reported?

Answer 31

ASIMS

Question 32

What does DCOR stand for?

Answer 32

Defence Confidential Occurrence Report

Question 33

What does MAS stand for?

Answer 33

Manual of Air Safety

Question 34

What’s within the MAS?

Answer 34

Guidance to establish and maintain the effectiveness of an air safety management system

Question 35

What is the AP 7400

Answer 35

Single service policy

Question 36

What is Air Safety?

Answer 36

Freedom from unacceptable risk of injury or damage during lifetime of system

Question 37

Define Airworthiness

Answer 37

Operation of air system in flight & ground, without posing significant hazard to aircrew, ground crew, passengers & 3rd parties

Question 38

Define flight safety

Answer 38

Collective endeavour to operate safely in air environment

Question 39

5 pillars ?

Answer 39

``` Questioning Reporting Learning Just Flexible ```

Question 40

SDH, what & who?

Answer 40

Senior duty holder | Chief of general staff

Question 41

DDH what and who?

Answer 41

Delivery Duty holder | Watchkeeper commander

Question 42

ODH what & who?

Answer 42

Operating Duty Holder | JHC

Question 43

What is an ALTI’s

Answer 43

Aviation Local Technical Instructions

Question 44

What is return to service? (5)

Answer 44

``` Description of approved air system Configuration Operating parameters Limitations Approved special clearances ```

Question 45

What sad f is the SOI?

Answer 45

It’s intended use. Required by the MAA

Question 46

Techs to see?

Answer 46

Ways of improving standards

Question 47

What are service modifications?

Answer 47

Service Mods to air system such as underwater acoustic locator

Question 48

Q

Question 49

General orders and mod?

Answer 49

Design team mods

Question 50

Technical directions

Answer 50

They come from Mil Camo

Question 51

What is the 2A1?

Answer 51

Is local level orders and special instructions

Question 52

Where to find components that require independent instructions?

Answer 52

Leaflet 1 2A1

Question 53

What is leaflet 27?

Answer 53

Pre/in/post soft faults

Question 54

Leaflet 33

Answer 54

Pinz pre flight check and post flight data download

Question 55

MMT?

Answer 55

Master maintenance tally

Question 56

MLT

Answer 56

Master line tally

Question 57

Why is MLT USED?

Answer 57

Held at live control away from main issue centre