Vista Programming Codes

Question 1

What is the factory default programmer code?

Answer 1

4112 + 800

Question 2

What code will set the panel back to factory default?

Answer 2

*97

Question 3

What does ECP stand for?

Answer 3

Enhanced console protocol

Question 4

How many digits is a CRC number?

Answer 4

4

Question 5

Which app do we use for monitoring?

Answer 5

CMS (monitors in Florida)

Question 6

What service communicates monitoring with CMS?

Answer 6

Alarm Net (New Jersey)

Question 7

After sending signals, ensuring everything is working, what must you do before you leave the site?

Answer 7

Make sure the system is off of TEST

Question 8

Alarmnet account numbers include what?

Answer 8

A two-digit city number
A two digit CS number
And a four digit subscriber number

Question 9

What user number is automatically assigned to the installer?

Answer 9

1

Question 10

What user number is assigned to the master account?

Answer 10

2

Question 11

What is the code for the zone menu?

Answer 11

*56

Question 12

• • address provides which function?

Answer 12

Panel will take user to the zone address for editing.

Question 13

+ address provides which function?

Answer 13

Shows all info for the indicated zone.

Question 14

What does AUI stand for?

Answer 14

Advanced user interface

Question 15

How many AUIs are on a standard panel and how are they listed?

Answer 15

4
AUI1
AUI2
AUI5
AUI6

Question 16

If a user has signed up for remote services, which AUI address is used?

Answer 16

AUI2, limiting the customer to three physical AUIs

Question 17

What does ECP stand for?

Answer 17

Enhanced console protocol

Question 18

How many IP cameras can be used with a total connect system?

Answer 18

8

Question 19

How many GPS devices can be assigned to each account location?

Answer 19

20

Question 20

What is the zone maximum for the Vista 20P and what are the breakdowns?

Answer 20

48 zones maximum
8 wired zones standard
15 wired zones using doubling
40 max wired expansion
40 max wired wireless

Question 21

How many key fob zones on the Vista 20P?

Do they count against the maximum number of zones?

Answer 21

16, no

Question 22

How many programmable outputs are there on the Vista 20P?

Answer 22

16 programmable outputs

Question 23

How many onboard voltage triggers come with the Vista 20P?

Answer 23

Two onboard voltage triggers

Question 24

How many zone lists are there on the Vista 20P?

Answer 24

12

Question 25

How do you enter programming mode on the Vista 20P?

Answer 25

1. Press both the * and # key s at the same time, within 50 seconds after power is applied to the control. 2. After power up enter the installer code (usually the customer's account number) + 800

Question 26

What sequence is used to change the installer code?

Answer 26

Enter programming mode, enter *20 + the new code.

Question 27

What are the two ways of exiting programming mode?

Answer 27

* 98 leaves programming, but prevents re-entry using the installer code * 99 allows re-entry into programming using installer the code (If *98 is used to exit programming mode, the system must be powered down then restarted and programming can only be entered during the first 50 seconds using * and #)

Question 28

What are the codes for entry exit programming?

Answer 28

* 34 - exit delay 60/60 * 35 - entry delay #1 * 36 - entry delay #2 ``` 0-96 = 0-96 secs 97 = 120 secs 98 = 180 secs 97 = 240 secs ```

Question 29

What codes allow you to enter primary and secondary phone numbers?

Answer 29

*41 *42

Question 30

What codes are used to program primary and secondary account numbers for both partitions.

Answer 30

* 43-*44 P1 | * 45-*46 P2

Question 31

What code is used to establish the autostay arm?

Answer 31

*84 prompts the system to automatically change AWAY mode to Stay mode if exit/entry door is not opened and closed within the exit time delay after the user arms AWAY mode.

Question 32

What code is used to program the cross zone timer?

Answer 32

*85

Question 33

What code is used to program AUIs?

Answer 33

*189 + partition codes (0=disabled, 1=partition 1, etc)

Question 34

What is the default address for keypad one?

Answer 34

16

Question 35

What programming code should be used to set up keypad 2?

Answer 35

*190 + partition/enable + sound code

Question 36

Which codes are used to represent addresses 18 through 23 respectively?

Answer 36

*191-*196

Question 37

What device address is assigned to the RF receiver?

Answer 37

00 address | Keypad message:100/91

Question 38

What device addresses are assigned to AUIs 1 through 6?

Answer 38

01,02,05,06

Question 39

Which device is attached to device address 3?

Answer 39

The long range radio

Question 40

What are device addresses 07 through 11 used for?

Answer 40

4219 and 4229 zone expanders

Question 41

What are device addresses 12 through 15 used for?

Answer 41

Relay modules 1 through 4 (4204)

Question 42

What code is used to enter zone programming mode?

Answer 42

*56

Question 43

ZT 01

Answer 43

Entry/exit #1

Question 44

ZT 02

Answer 44

Entry/exit #2

Question 45

ZT 03

Answer 45

Perimeter

Question 46

ZT 04

Answer 46

Interior follower

Question 47

ZT 05

Answer 47

Day / night

Question 48

ZT 06

Answer 48

24-hour silent

Question 49

ZT 07

Answer 49

24-hour audible

Question 50

ZT 08

Answer 50

24-hour aux

Question 51

ZT 09

Answer 51

Fire

Question 52

ZT 10

Answer 52

Interior with delay

Question 53

ZT 12

Answer 53

Monitor zone

Question 54

ZT 14

Answer 54

Carbon monoxide detector

Question 55

ZT 16

Answer 55

Fire with Verify

Question 56

ZT 20

Answer 56

Arm STAY

Question 57

ZT 21

Answer 57

Arm AWAY

Question 58

ZT 22

Answer 58

Disarm

Question 59

ZT 23

Answer 59

No alarm response

Question 60

ZT 24

Answer 60

Silent burglary

Question 61

When cross zoning, both zones must protect the same area and be in the same partition, true or false?

Answer 61

True